Audiophony MIO-Sat225b operation manual

• 25W, 8 Ohms speaker

• For indoor use

• Compact satellites with orientable mounting

• Subtle terminals integrated within the support

Power 25W RMS - 50W max.

Impedance 8 Ohms

Wall-mount speakers

brackets

Transducers 2 x 2.75" loudspeakers

SPL max. (@1m) 110dB

Frequency response 200 Hz - 15 KHz

Materials ABS housing, black metal grille

Fixation system Adjustable wall-mounting brackets supplied

Connectors 2 rear terminals integrated within the support

Dimensions (l x h x d) 90 x 180 x 136 mm

Weight 950 g

10150 - Version 1.0 / 01-2014

Package contents

The package must contain the following articles:

- 2 MIO-Sat225b speakers

- 2 supports to be clipped at the rear of your speakers

Please contact your retailer immediately if one article were to be missing.

Description

Drilled holes to fix the

support to a wall

Tightening screw

for swivelling

holder

BTR 3mm

Drilled holes to attach the
support to your speaker

Dimensions

Negative signal

connector (black)

Positive signal
connector (red)

Caution: Please make sure
you only use low-impedance
amplifiers with a maximum
output of 25W RMS at 8 Ohms

90136

180

89

Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are subjects to
modifications without prior notice. That is why technical specifications and the products physical configuration might differ from the illustrations.
Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com
AUDIOPHONY® is a trademark of HITMUSIC S.A. - Zone Cahors sud - 46230 FONTANES - FRANCE