Audio Note DAC One.1x Owner's Manual

Congratulations on your purchase of the Audio Note™ DAC One.1x.
The DAC One.1x was specifically designed and engineered for the best sonic performance rather than technical specifications. Although the DAC One.1x is a
digital component (there is no avoiding this unfortunately!), it will bring a new level of musicality to your CD’s and is fatigue free during extended listening periods. In order to obtain the best possible performance and longevity from your DAC, please read over this manual carefully.
Technology: The DAC One.1x uses the revolutionary and currently exclusive Audio Note™ digital technology which we have the 1xoversampling™ direct from disc™ circuit topology. The ultimate version of this technology is found in the extremely expensive DAC5Signature, and we have taken great to ensure that as much of the inherent advantages of the topology have been retained in the sound of the DAC One.1x. The technology dispenses with all the correction measures inherent in all other d-a converters and presents the digital signal directly to the converter after reformatting. This allow you to hear what is actually recorded on each disc, rather than, as has been the case up to now, some technically and cosmetically altered version, as a result the reproduction is more reminiscent of a master tape in quality.
Not surprisingly for an Audio Note™ product, the DAC uses vacuum tube technology, implemented using traditional Audio Note techniques.
UNPACKING & INSTALLATION.
Please take care when unpacking the DAC. We recommend that you store the packing materials in case the unit requires shipping at a later date.
Next, select a suitable location for the unit, ensuring that adequate ventilation is provided (the vacuum tubes do generate some amount of heat). In the interest of safe, reliable operation, situate the DAC away from dampness or direct sunshine.
Worthwhile sonic improvements may be obtained by locating the unit on a suitably designed audio component support system.
AFTER CARE No special maintenance is required for the DAC One.1x. Cleaning is best made with
a soft cloth or brush similar to those sold by photographic stores for lens cleaning applications.
- -
1
Use a cloth dampened with mildly warm water and a weak soap solution for removing grease or oily substances. Strong or alcohol based solvents may cause damage to the DAC’s finish.
Replacing the vacuum tubes. The vacuum tube used in the DAC One.1x is a sub miniature triode called the 6111WA, it is wire ended and soldered directly into the PCB. The 6111WA should provide a useful life span of about 10 years if the DAC is operated 24 hours per day, which is the recommended operation and the one that sounds the best.
Although replacement tubes for the DAC One.1x are fairly widely available, better performance will be obtained with tubes selected and matched specifically for the DAC by Audio Note. Should the vacuum tubes require replacement, please contact your Audio Note dealer for technical support.
- -
2
Loading...
+ 3 hidden pages