1) CE DECLARATION OF CONFORMITY
DISPOSAL
2) AN-J MODELS
3) INTRODUCTION
4) OVERVIEW
6) UNPACKING AND INSTALLATION
7) CONNECTION
8) CONNECTION TO AMPLIFIER
9) OPERATION
10) TECHNICAL SPECIFICATIONS
11) WARRANTY INFORMATION
12) CONTACT INFORMATION
CE DECLARATION OF CONFORMITY
DISPOSAL
This product must not be disposed of as normal household waste. To
prevent possible harm to the environment please separate the product
from other waste to ensure that it can be recycled in an environmentally
safe manner. Please contact your retailer or the appropriate local
government office for collection facilities.
We declare under our sole responsibility that this product is in conformity
with the following standards or standardized documents:
BS EN 60065 in accordance with the regulations 73/23/EEC, 89/336/EEC
(from 1 January 1997)
CE 94
Peter Qvortrup,
Director
Audio Note (UK) Limited
Viscount House
Star Road, Star Trading Estate
Partridge Green
West Sussex
RH13 8RA
United Kingdom
Tel: +44 (0)1273 830 800
Fax: +44 (0)1273 731 498
Thank you for purchasing this Audio Note (UK) product. With the correct care it
should give you many years of pleasure and enjoyment.
Please take the time to read all of the information in this manual before connecting
your new component to an electrical supply or your system, to ensure both your
safety and satisfaction.
Please note that due to our desire to continually improve products, specifications are
subject to change without notice. Therefore it is important to refer to the manual that
is supplied with your product for the most accurate information; manuals downloaded
from our website or obtained from other sources may no longer fully apply to your
product.
If you have any questions regarding the information contained within this document
or your new component, please feel free to contact us: -
Audio Note (UK) Limited
Viscount House
Star Road, Star Trading Estate
Partridge Green
West Sussex
RH13 8RA
United Kingdom
Tel: +44 (0)1273 830 800
Fax: +44 (0)1273 731 498
e-mail: info@audionote.co.uk
1” tweeter & 8” standard paper bass driver with copper voice coils, 93 dB efficient, AND internal copper speaker cable, internal crossover, copper inductors, chipboard / MDF
cabinet, Black Ash real wood veneer.
1” tweeter & 8” standard efficiency Hemp bass driver with copper voice coils, 93 dB
efficient, AN-D internal copper speaker cable, internal crossover, copper inductors,
chipboard / MDF cabinet, Black Ash real wood veneer.
1” tweeter & 8” standard paper bass driver with copper voice coils, 93 dB efficient, ANLEXUS-LX internal copper cable, internal crossover, copper inductors, Birch ply
cabinet, real wood veneers.
1” tweeter & 8” standard Hemp bass driver with copper voice coils, 93 dB efficient, ANLEXUS-LX internal copper cable, internal crossover, copper inductors, Birch ply
cabinet, real wood veneers.
1” tweeter & 8” standard paper bass driver with copper voice coils, 93 dB efficient, ANSPe internal Silver cable, internal crossover, copper inductors, Birch ply cabinet, real
wood veneers.
1” tweeter & 8” standard Hemp bass driver with copper voice coils, 93 dB efficient, ANSPe internal Silver cable, internal crossover, copper inductors, Birch ply cabinet, real
wood veneers.
1” tweeter & 8” standard paper bass driver with copper voice coils, 93.5 dB efficient,
AN-SPe internal Silver cable, internal crossover, Silver inductors, Birch ply cabinet, real
wood veneers.
1” tweeter & 8” standard Hemp bass driver with copper voice coils, 93.5 dB efficient,
AN-SPe internal Silver cable, internal crossover, Silver inductors, Birch ply cabinet, real
wood veneers.
1” tweeter & 8” standard Hemp bass driver with copper voice coils, 93.5 dB efficient,
AN-SPx internal Silver cable, internal crossover, Silver inductors, Birch ply cabinet, real
wood veneers.
1” tweeter & 8” Hemp bass driver with Silver voice coils and custom made ALNICO
magnets on tweeter and woofer, 93.5dB efficient, AN-SOGON-LX internal Silver cable.
Internal crossover with Silver inductors and custom made polyester capacitors. Birch
ply cabinet, real wood veneers.
4-leg high mass steel black sprayed speaker stand 15” high. Self assembly, stand
should be filled with fine lead shot and fine sand to increase mass as much as possible.