Audioline SENSOR 500 TELECOM Addendum

SENSOR 500 INITIAL SETUP

On pages 5 & 6 of this manual, references to the display showing:”--------”
should read: display showing “INSERT 10/0”

If you are a Centrex user, the phone needs to be programmed to insert “10”
If you are not using Centrex, the phone must be set to insert “0”

• Press and hold until diplay shows: “INSERT 10/0”.

• Press to select.

• Press to select “0” or “10” (current selection will flash).

• For Centrex “10” must be flashing.

• For Non-Centrex “0” must be flashing.

• Press to set.

When you first connect your Sensor 500 and are using Telecom Call Minder
service you will need to program the PLAY button.

• Press

• Press and hold down until the display shows text, then release

• Dial 083210.

• Press

• Dial your call minder PIN number. (Please note that this number will

show on the display each time the key is pressed.)

• Press #

• Press

• Dial “1”

• Press to store

• Press to finish.