Audioline PMR easy 006 Users Manual

PMR Easy 006 Accessory Set

The following items are supplied:

Two battery packs Two headsets
One plug-in power supply One instruction manual

Connecting the headset

The radios can be used with an external microphone and earpiece, a
so-called headset. With the Vox-mode (operating instructions PMR
Easy 006, chapter 3.10) you can speak, without pressing the PUSH TO
TALK button. In this way, you can keep your hands free for other
activities. The connection will be found on the top underneath a cover.
Open the cover on the top of the radio and insert the plug into the
socket. The loudspeaker in the radio is switched off when the headset is
in use. Make sure that the microphone opening remains unobstructed.
When using the headset, we recommend that the keypad lock on the
radio is activated so that no settings can be changed unintentionally.

Battery packs

With the rechargeable battery, each radio has a standby time of 30
hours and a talk time of ca. 12 hours. The radios can be recharged in 16
hours by means of the plug-in mains power supply using the 7.5V DC
socket. The plug-in power supply has two connectors so that both
radios can be charged simultaneously.

PMR Easy 006 Accessory Set

Note: Please do not use different battery packs, normal rechargeable
batteries or other power supplies, as these can damage the radios.

Fitting the battery packs

o Undo the fixing screw for the belt clip and swivel the belt clip to

the side.

o Unclip the battery compartment cover and open the compartment.
o Now insert the battery pack taking care to ensure that the polarity

is correct.

o Close the battery compartment.
o Swivel the belt clip back into its correct position and retighten the

screw.

CE mark – The power supply complies with the requirements of the
Low Voltage Directive 73/23/EWG. This is confirmed by the CE mark.

Internet: www.audioline.de - E-mail: [e-mail]

AUDIOLINE GmbH

Service Hotline [phone]