Audioline CDL400 User Manual
Specifications and Main Features
- Model: TDV-TEL-02 Cordless Telephone having Digital Answering System
- Cordless Technology: Radio communication device which consist of a transmitter and receiver
- Key Features:
- High quality voice recording supported digital answering unit
- Non volatile memory to store 10 telephone numbers (each max. of 19 digits)
- Intercom and two way recording features.
- Selective intelligence which optimizes channel allocation feature.
- Use of Digiclear circuitry to limit background noise suppression.
- Dynamic digital call guard used for protection.
- Equipment compatible to hearing aids.
- Battery:
- Handset: Powered using rechargeable batteries
- Base Station: Requires four size ‘AA’ 1.5V Alkaline (non-rechargeable) batteries.
- Battery charging time: 24 hours on the initial charge.
- Standby time: Up-to 24 hours, during which eight hours of use is possible following a power outage.
- Size and Operational Parameters Such As:
- Ideal Distance: 200 M
- Operating Channels: 10 channels to combat interference
- Message time for recordings: 14 minutes is the maximum to record a total of 2 T.sh. does max with each
- Call waiting feature is supported with Telstra Easycall function.
- LED Controls:
- Status power LED, status
- In use LED, indicating a call is live
- Charging LED to indicate handset replacement conditions.
- Additional Controls:
- Ringer on/off switch
- Pulse/Tone dialing switch
- Volumes for playback control
- Functions for skipping, repeating and erasing messages
- Settings for remote access control
- Accessibility:
- Disable security code bypass for unintentional unauthorized intrusion.
- Operating all answering machine course through the interaction device users are freely able to use.
Frequently Asked Questions
Q1: How do I go about setting the CDL400 up for maximum use?
A1: Select a precise geographical area in which the base unit will be positioned, install backup for the batteries at the base station and use the handset batteries after 24 hours of charging them.
Q2: The handset, what batteries does it use?
A2: The handset comes installed with batteries that are rechargeable.
Q3: For the first time, how long are the handset batteries supposed to be charged?
A3: The recommended amount of time is 24 hours for charging the handset.
Q4: The answering system is in use, can the handset be on the charge?
A4: It is possible to use the answering system with the handset charging.
Q5: How do I go about setting up the outgoing message (OGM) on the answering machine?
A5: Press the OGM button and hold it down and afterwards press the button and record your message when you hear the tone, and when you are done release the button.
Q6: What are the consequences of not configuring the system with the appropriate date and time?
A6: A keypad lock flash will occur for a persistent duration and it will not stop flashing until the specified time and day is adjusted.
Q7: What’s the procedure to delete all of the messages stored in the answering system?
A7: You have to push and maintain the erase key for 2 seconds which will prompt the system to inform that all the messages have been erased.
Q8: Is it possible to retrieve my messages with my CDL400 when I am out?
A8: Yes, you can pull messages through an external tone dialing telephone while being far away from your location.
Q9: What is the purpose of the ringer on/off switch?
A9: The ringer on/off switch gives you the capability of turning off the ringer located in the base station if required.
Q10: What’s the way to modify the remote security code?
A10: Make sure that the talk light is not on and then say something on the handset remote button and wait for guided instructions before keying in a new 3-digit code of your choice.
User Manual
Loading...