Audiodesign TRIO LA 6/10, TRIO LA 8, TRIO LA 15 User Manual

OTHER SYSTEMS OF THE TRIO LA FAMILY

TRIO LA 8/12

TRIO LA 16/15

PROFESSIONAL SPEAKERS, AMPLIFIERS AND ACCESSORIES

Audiodesign Srl
Via dell’industria, 28 - 42025 CAVRIAGO (RE)
[phone] - Fax [phone]
www.audiodesign-pro.com
[e-mail]

TRIO LA 8/15

TRIO LA 12/15

Full Range Sound System

TRIO LA 6/10

User Manual

Portable Full Range Sound System TRIO LA 6/10

Application

The KPRO systems are a professional solution for every DJ or Live events where high pressure and extreme
sound quality is required.

Portable Full Range Sound System TRIO LA 6/10

Introduction

Thank you for purchasing an AudioDesign TRIO Active Sound system.
TRIO series is designed to provide an high and powerful sound quality in a compact size.

The main features are:

Active subwoofer cabinet with additional amplifiers for the passive satellites.

*

High sensitivity passive satellites.

*

High and precise acoustic quality also with high power.

*

Portability: the system is easy fit and portable by one person.

*

The final result is a full, detailed and powerful sound.

TRIO

Precautions:

Caution: When using any electric product , precautions should always be taken, including the following:

1) Read carefully all instructions before using the product.

2) To reduce the risk, strict supervision is necessary when the product is used near children.

3) Don't use the product near to water sources like sinks, kitchens, wet floors, pools,
or similar or when raining.

4) In case hearing losses or buzzing occur, please contact a doctor.

5) This products should be located so that its position does not interfere or reduce its proper ventilation.

6) This product should be site away from heat sources such as radiators or any other product that
generate heat.

7) This product should be connected to a power supply line only of the type described on the operating
instructions. Check always the status of the power cable.

8) In case you need to replace the fuse, unplug power supply before replacement. The fuse is located
over the power socket and needs to be replaced with a fuse of same type and value. If the fuse blows again,
please contact our service. DON'T replace it a second time with a higher value fuse.

9) Unplug power supply when left unused for a long period of time. Don't draw the cable but pull out the
plug.

10) Make sure that power switch can always be easily reached.

11) The product needs to be inspected by authorized or qualified personnel in case:
A- The power cable or plug are damaged
B- Objects or liquids fall inside the product
C- The product has been exposed to rain
D- The product doesn't appear to operate normally or exhibits a marked change in performance.
E- The product has fallen and been damaged.

12) DON'T operate on the product, except indications on the user's manual . Please refer to authorized
and qualified personnel for any other operation.

13) Caution: Don't place objects on the product's power cable or place it in a position where it could be
damaged or cause interferences. Improper installation could cause fire risk and/or personal injury.

TECHNICAL SPECIFICATIONS

INPUT

OUTPUT

AMPLIFIERS Subwoofer Power Output: 250 W RMS (500 W Max)

SPEAKER

WEIGHT & SIZES Weight Subwoofer:

INPUT

SPEAKERS

MAIN FEATURES

WEIGHT & SIZES Weight Satellite:

SUBWOOFER STAGE PRO W10

LINE IN: Combo Socket XLR 3-F / Jack Stereo
INPUT: Balanced and Unbalanced

SATELLITES OUTPUT: Speakon NL4 (pin 1+ = +, pin 1- = -)

Satellites Power Outputi: 2x125 W RMS (2x250 W Max)

Electronic Crossover LP Subwoofer:

Electronic Crossover HP Satellites:

Subwoofer: 1 x 10”
Frequency Response: 30 ÷ 260 Hz (± 3 dB)

SPL Max:

SPL Max:

Sizes (WxLxH) cm:

SATELLITES INPUT:

High Sensitivity Mid-Bass
Tweeter

TOTAL IMPEDANCE :
TOTAL POWER :
TOTAL SPL Max:
Frequency Response:
Tweeter :Crossover

Size (WxLxH) mm:

SATELLITE STAGE PRO 65

Frequency
Frequency

(250 mm)

121 dB

123 dB

32 kg
43 x 39 x 39

Speakon NL4 (pin 1+ = +, pin 1- = -)

(87 mm) Neodymium

6 x 3.5”
4 x VC 13 mm

6 Ohm
160 W RMS
121 dB
100 ÷ 20000 Hz
6000 Hz

3 kg
105 x 65 x 650

(250 W Max) with X-over 120 Hz 12 dB/oct

46 - 240 Hz / 12 dB/Oct.
38 - 250 Hz / 12 dB/Oct.

VC 50 mm

( )± 3 dB
12 dB/oct

@ 4 Ohm Load

VC 25 mm

Passive

BY MEANS OF OUR ACCESSORIES, DIFFERENT CONFIGURATIONS OF THE SYSTEM ARE POSSIBLE

Service

All Audio Design PRO products have been inspected and tested before leaving the factory and , if properly

used, they will work for many years. However, in case of any problem, please proceed in the following way:
Contact your dealer and inform about the defect you found
In case it won't be possible to solve the problem with the dealer, the product needs to be returned, preferably
in its original packaging or in a proper packing to protect it during the transport. Purchase documents must
be produced too.
Your dealer will arrange the shipment to our service centre.

Conformity:

Audiodesign Pro products comply with presently existing directives and standards.

- 2 -

- 7 -