AudioControl LC2i PRO, LC1i Literature
UNPARALLELED PERFORMANCE
FROM YOUR OEM RADIO
2 CHANNEL COMPACT ACTIVE LINE OUTPUT CONVERTERS
ACTIVE SPEAKER LEVEL INPUTS | LOAD SELECTION SWITCH FOR SEAMLESS OEM INTEGRATION
MULTIPLE TRIGGER MODES | GTO
PATENTED ACCUBASS
®
PROCESSING | ACR-1 REMOTE INCLUDED (LC2i PRO)
TM
SIGNAL SENSE | AUDIO SENSE| REMOTE IN
MOBILE ELECTRONICS
2 CHANNEL COMPACT ACTIVE LINE OUTPUT CONVERTERS
The LC1i and LC2i Pro join ranks with AudioControl’s most
popular active line output converter, the LC2i. Adding a sub?
Planning a full system? Either way, get the best possible signal
from your factory sound system to your amplifiers. Load selection
switches mean OEM integration has never been easier and
the LC1i and LC2i Pro will work with the most finicky factory
sound systems. Installer friendly turn on trigger modes allow
for flexibility via GTO™ Signal Sense (DC offset), audio sense,
or remote 12 volt inputs. For future head unit upgrades, the
LC1i is also a line driver and can remain in the system to
provide optimal preamp signal. Step up to the LC2i Pro for
AudioContol’s AccuBASS® and an included ACR-1 level control.
MODEL
LC2i PRO
LC1i
Speaker
Level
Inputs
Line
Level
Inputs
2 NA
2 2
Maximum Input
Handling (20 kΩ)
40 Volts
(400 Watts)
40 Volts
(400 Watts)
Load Selection
Settings
20 ohms
60 ohms
20 kohms
20 ohms
60 ohms
20 kohms
Trigger Modes
GTO™ Signal Sense
Audio Sense
Remote 12V Input
GTO™ Signal Sense
Audio Sense
Remote 12V Input
• Active Speaker Level Inputs (up to 40V input handling)
• Built In Line Driver with up to 9.5 Vrms Output
• Line Level Inputs (LC1i)
• AccuBASS® Bass Rolloff Compensation Circuit (LC2i Pro)
• Load Selection Switch for Painless OEM Integration
• Multiple Trigger Modes: GTO™, Audio Sense, 12 V Turn On
• Slim Chassis with Integrated Mounting Brackets
• ACR-1 Dash Remote Included (LC2i Pro)
Preamp Outputs
Main Bass
2 2 9.5 Vrms
2 NA 9.5 Vrms
Maximum
Output Level
Frequency
Response
20 Hz 50 kHz
20 Hz 50 kHz
Signal to
THD
Noise
0.01% >110 dB Y
0.01% >110 dB N
LC2i Pro includes the
ACR-1dash remote for
subwoofer level control.
AccuBASS
®
Remote
Level
Control
ACR-1
Included
NA
+18
+12
+6
0
-6
-12
-18
20Hz 50Hz 100Hz 300Hz1 kHz
www.audiocontrol.com
Bass Restored to Flat
AccuBASS
Factory Rolloff
®
T h e
LC2i Pro
features a full
range Main Output
as well as a low passed
(1000 Hz) Bass Output. Use the
LC2i Pro to quickly add a subwoofer
or a compact front stage plus subwoofer to
your factory system. AccuBASS can be used to
compensate for factory bass rolloff or as an enriching low
frequency boost. Once you’ve experienced AccuBASS, you’ll
wonder how you lived without it.
Features, appearance and specifications subject to change without notice.
©2020 AudioControl, Inc. All rights reserved.
Loading...