worlds first six channel pre-amp equalizer from AudioControl, the leading manufacturer of performance signal processors and analyzers. Whether this is your first product from
the rainforest dwellers of AudioControl or you are already a
firm believer, you will definitely enjoy how great the EQS
can make your performance autosound system sound.
Now before you start salivating too much just thinking
about the benefits of the EQS, take a few minutes to sit back,
have a latte’, decaffeinated if necessary, and
read through this manual. It contains lots of
useful facts and information - - and besides, we
spent a lot of time writing it!
Owner’s Enjoyment Manual
1
®
KEY FEATURES OF THE EQSFEATURES AND HIGHLIGHTS
Dual-bandwidth Equalization: Car interiors vary
widely in size and acoustic make-up. In addition doors, kick-
Here are some of the cool features that are enclosed in
this magical box:
·Dual-bandwidth equalization
·13 volt pre-amp line driver
tm
·Auto Select
Inputs
·Voltage indicator LED’s
·Speaker level inputs
·PFM subsonic filter
·Balanced differential inputs
panels, and rear decks don’t make the best location for
speaker placement causing your high performance speaker
system to sound somewhat lackluster. The EQS offers
maximum equalization controls for each area of the audio
spectrum. One-third octave bass equalization combined
with one-half and full octave high frequency equalization
offers an ideal level of control.
13 Volt Pre-Amp Line Driver: The EQS offers a high
quality line driver that takes the low output voltage of a
source unit and increases it up to 18dB (13 volts peak). This
allows you to maximize the signal-to-noise of your system
and drive your amplifiers to their maximum output without
clipping. No hiss, clicks, or pops plus maximum sound
quality.
Auto Select
tm
Inputs: Whether your source unit has
two, four, or six outputs, the EQS will automatically switch
the inputs to maximize your equalization controls.
2
Owner’s Enjoyment Manual
EQS
tm
Speaker Level Inputs: If you are like many people and
like the look and features of your factory installed source
unit but feel it’s lacking power and bass, we have good news.
The EQS has a unique high impedance speaker level input
that will interface with most factory installed source units
(even Bose) and let you add amplifiers and speakers to your
hearts content. However, unlike some of the cheesy speaker
level line output converters available, the EQS offers a very
high fidelity sound quality input.
PFM Subsonic Filter: This unique feature is legendary
with many AudioControl fanatics for it’s ability to fine-tune
the bass response of any system. Why waste power on nasty
subsonic information when your Programmable Frequency
Match (PFM) filter will help you clean things up.
Bulletproof Warranty: The most important feature
of all. Every AudioControl product is
selflessly designed and
manufactured by the
occupants of our
rainforest factory. We take every effort to ensure that you
will have many years of enjoyment out of your EQS. To
ensure the performance of your new toy, we highly recommend that you allow your authorized AudioControl dealer
to perform the installation. Not only do they have all the
right knowledge and tools, but in the unlikely chance your
EQS should stop working, we will back it with a limited five
years parts and labor warranty. Should you choose to install
it yourself we will still give you one-year parts and labor
warranty. To activate your warranty, you need to FILL OUT
AND SEND IN YOUR WARRANTY CARD!
We also recommend that you save your invoice or sales
slip as proof of installation and ownership. Not only is it
necessary for warranty purposes, but should your EQS
”disappear” one day while your car is parked at your local
latte’ stand, you will find insurance companies very unforgiving without proof of purchase.
Owner’s Enjoyment Manual
3
®
QUICK INSTALLATION INFORMATION
For those of you short on time but high on ambition we
offer the following section to speed up your installation of
the EQS:
1. The EQS needs to be installed in the signal path between
your source unit and an external amplifier(s). If this is not
obvious to you, quickly pack up your EQS and run to your
nearest authorized AudioControl dealer to have them
perform the installation. You will thank us later.
2. Physically mount the EQS in a location that keeps it away
from soda spills, food crumbs, and curious fingers. However you will want to select a
location that allows you
access to the equalization
controls.
3. Hook up +12 volt power,
-12 volt ground, and remote
turn-on. If you need to know
more, then read on. Heck if
you don’t think you need to
Figure 1: Basic EQS System
know more, you should still read on, because you can
never know too much.
4. Level match the inputs of your EQS to your source and
then adjust the outputs to match with your amplifier
inputs.
Note: You will want to turn the gains on your amplifiers
DOWN to maximize your systems performance.
5. Now comes the fun apart. Set your equalization
controls to where your system sounds the most balanced yet
dynamic. More about this in the section titled “Adjusting
Your Equalizer”…and you thought you would not have to
read the rest on the manual. Hah!
4
Owner’s Enjoyment Manual
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.