AudioControl AC-LGD20 Owner's Manual

LOAD GENERATING DEVICE & SIGNAL STABILIZER FOR OEM SOUND SYSTEMS REQUIRING A SPEAKER LOAD

PROVIDES STABILITY TO OEM SOUND SYSTEMS IDEAL FOR NON-AMPLIFIED DODGE®, CHRYSLER®, JEEP®, MASERATI MAXIMUM INPUT 15 VRMS (50 WATTS)

FACTORY UPGRADE ACCESSORY

LOAD GENERATING DEVICE & SIGNAL STABILIZER

8 51523 00771 3

FOR OEM SOUND SYSTEMS REQUIRING A SPEAKER LOAD

What is a Load Generating Device?

Today’s factory ampliers feature built in protection circuits which can mute some or all audio outputs when the factory speakers are removed. The AC-LGD 20 has been designed to generate load and stabilize signal from amplied factory systems to ensure the best possible audio.

Quick Start:

1. Remove one speaker level input plug from your AudioControl active line output converter (LOC), processor, or amplier

2. Unplug one end of AC-LGD 20 then plug the AC-LGD 20 into the LOC

3. Install the plug you removed from the LOC to the open end of the AC-LGD 20

4. Connect your factory speaker signals to the AC-LGD 20

5. If you are using a LOC with dierent style connectors, unscrew the connectors from the AC-LGD 20 wires and connect the wires accordingly

Important

Ä Do not exceed 15 Vrms (50 watts) of input Ä Operating Impedance: 20 Ohms Ä Do not install under carpet or near heat sources

Rear Outputs Rear Inputs

From Factory

Amplier

Front Outputs Front Inputs

R L L

R R L L

22410 70th Ave West | Mountlake Terrace, WA 98043 USA Phone 425-775-8461 | Fax 425-778-3166 www.audiocontrol.com

Also makes a charming bracelet!

What’s Included?

One pair of AC-LGD 20s prewired with EIA color coded wires

R R L L

To Speaker Level Inputs

R R L L