AudioControl AC-LGD User Manual
LOAD GENERATING DEVICE
& SIGNAL STABILIZER
“GREAT SOUND FROM
YOUR FACTORY RADIO!”
FACTORY UPGRADE ACCESSORY
8 51523 00723 2
LOAD GENERATING DEVICE
R+
L+
L-
R+
R-
FROM FACTORY AMPLIFIER
Y AMPLIFIER
T
R+
L+
L-
R+
R-
& SIGNAL STABILIZER
What is a Load Generating Device?
Today’s factory systems include more Class D amplier
technology which can mute, distort or emit damaging
frequencies to your new after-market audio equipment when
the factory speakers are removed. Using a Zobel Network, the
AC-LGD has been designed to generate load and stabilize signal
from the factory system to ensure the best possible audio.
Important things to remember:
AudioControl active line output converters and processors (such
as LC2i and DM-810) are world renowned for having the widest
Installation:
Installation is simple. Remove one input plug from your
AudioControl active line output converter (LOC). Unplug one
end of AC-LGD then plug the AC-LGD into the LOC. Install the
plug you removed from the LOC to the open end of the AC-LGD.
Connect your factory speaker signals to the AC-LGD. If you are
using a LOC with dierent style connectors, you may unscrew
the connectors from the AC-LGD wires and install dierent ones.
O LC INPUTS
voltage range available. When using the AC-LGD, you must limit
voltage input through the device. The maximum recommended
power handling for the AC-LGD is 100 watts or 20 volts. To
AC-LGD
prevent damage or overheating, do not install or mount the
AC-LGD below carpet or near heat sensitive components.
Do’s and Don’ts:
• Do remember distortion is not your friend
AC-LGD
• Don’t exceed 20 volts or 100 watts of input on the AC-LGD
• Do keep all wiring neat and tidy
• Don’t hide AC-LGD under carpet or mount on the heater ducts of your vehicle
• Do remember all AudioControl products are made in the USA with products sourced from all over the world
• Don’t believe your system is as good as it can be without using AudioControl products designed and engineered in the
Rain Forests of the Pacic Northwest.
REAR OUTPUTS
RL+
L-
FROM FACTOR
FRONT OUTPUTS
RL+
L-
22410 70th Ave West | Mountlake Terrace, WA 98043 USA
Phone 425-775-8461 | Fax 425-778-3166
www.audiocontrol.com
©2017 AudioControl. All rights reserved.
P/N 9120520 Rev A
Loading...