Audiocom SPS-2001, PS-2001L User Manual
Model PS-2001L
Power Supply
Model SPS-2001 Power Supply
-2001L
S
P
1
2
™
SPS-2001
1
2
™
Volume
9350-7699-000 Rev D 12/2006
PROPRIETARY NOTICE
SHIPPING TO THE MANUFACTURER
The product information and design disclosed herein were originated by
and are the property of Telex Communications, Inc. Telex reserves all
patent, proprietary design, manufacturing, reproduction, use and sales
rights thereto, and to any article disclosed therein, except to the extent
rights are expressly granted to others.
COPYRIGHT NOTICE
Copyright 2006 by Telex Communications, Inc. All rights reserved.
Reproduction, in whole or in part, without prior written permission from
Telex is prohibited.
WARRANTY NOTICE
See the enclosed warranty card for further details.
CUSTOMER SUPPORT
Technical questions should be directed to:
Customer Service Department
RTS/Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 USA
Telephone: 800-392-3497
Fax: 800-323-0498
Factory Service: 800-553-5992
RETURN SHIPPING INSTRUCTIONS
Customer Service Department
Telex Communications, Inc. (Lincoln, NE)
Telephone: 402-467-5321
Fax: 402-467-3279
Factory Service: 800-553-5992
Please include a note in the box which supplies the company name,
address, phone number, a person to contact regarding the repair, the type
and quantity of equipment, a description of the problem and the serial
number(s).
All shipments of product should be made via UPS Ground, prepaid (you
may request from Factory Service a different shipment method). Any
shipment upgrades will be paid by the customer. The equipment should
be shipped in the original packing carton. If the original carton is not
available, use any suitable container that is rigid and of adequate size. If
a substitute container is used, the equipment should be wrapped in paper
and surrounded with at least four (4) inches of excelsior or similar shockabsorbing material. All shipments must be sent to the following address
and must include the Proof of Purchase for warranty repair. Upon completion of any repair the equipment will be returned via United Parcel
Service or specified shipper, collect.
Factory Service Department
Telex Communications, Inc.
8601 East Cornhusker Hwy.
Lincoln, NE 68507 U.S.A.
Attn: Service
This package should include the following:
PS-2001L
Qty. Description Part No.
1 PS-20001L Final Assembly 9010-7699-001
1 User Manual 9350-7699-000
1 Warranty Statement 38110-390
4 Rubber Feet 56471-001
1 Power Cord, Black 2504-0003-00
1 Statement of Conformity 38109-675
SPS-2001
1 PS-20001L Final Assembly 9010-7699-001
1 User Manual 9350-7699-000
1 Warranty Statement 38110-390
4 Rubber Feet 56471-001
1 Power Cord, Black 2504-0003-00
1 Patch Cord 50628-003
1 Statement of Conformity 38109-675
FCC STATEMENT
This equipment uses, and can radiate radio frequency energy that may cause interference to radio communications if not
installed in accordance with this manual. The equipment has been tested and found to comply with the limits of a Class
A computing device pursuant to Subpart J, Part 15 of FCC Rules which are designed to provide reasonable protection
against such interference when operated in a commercial environment. Operation of this equipment in a residential area
may cause interference which the user (at his own expense) will be required to correct.
This product meets Electromagnetic Compatibility Directive 89/336/EEC.
TABLE
CONTENTS
Introduction 3
Description 3
Installation 7
Configuration Switches 7
Intercom Channel and Program Connections 7
Channel Capacity: 7
Audiocom Connections: 7
Clear-Com Applications: 7
Desktop or Rackmount Installation 7
Power-Up Check 13
Specifications 13
OF
CHAPTER 1
Introduction
Description
The PS-2001L and SPS-2001 are versatile power supplies that can be used in a variety of Audiocom® intercom system
applications. They both directly accept any AC input power from 100 to 240 VAC, 50/60 Hz and can be configured to power
two separate intercom channels or one large intercom channel with twice the intercom station capacity. Additionally, the units
can be configured for compatibility with Clear-Com
For rack mounting, optional hardware is required. For desktop use, four non-marring rubber feet are supplied. The SPS-2001
also provides a speaker with two mixed inputs making it ideal for situations calling for a master station with a microphone/
speaker combination.
®
Intercom Systems. The units may be rack mounted or used on a desktop.
®
3
100-240 VAC 60/50 HZ
TELEX COMMUNICATIONS, INC. MADE IN USA
FIGURE 1. PS-2001L Front and Rear Panel Features
UNBAL
BAL
5
Combine
Isolate
1
4
CH 1
CLASS 2 WIRING 1.5A 24VDC
PS-2001L
1
2
2
CH 2
3
Loading...