Audiocom BP-2002, BP-1002 User Manual

Operating Instructions

BP-1002/BP-2002 Beltpacks Audicom Inter com Systems

9350-7740-000 Rev K 08/2008

Proprietary Notice

Shipping to the Manufacturer

The product information and design
disclosed herein were originative by and are
the property of Telex Communications, Inc.
Telex reserves all patent, proprietary design,
manufacturing, reproduction, use and sales
rights thereto, and to any article disclosed
therein, except to the extent rights are
expressly granted to others.

Copyright Notice

Copyright 2008 by Telex Communications,
Inc. All rights reserved. Reproduction, in
whole or in part, without prior written
permission from Telex is prohibited.

Warranty Notice

See the enclosed warranty card for further
details.

Customer Support

Te chnical questions should be directed to:
Customer Service Department

RTS/Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 U.S.A.
Telephone: [phone]
Fax: [phone]
Factory Service: 1-800-553-5992

Return Shipping Instructions

Customer Service Department
Telex Communications, Inc. (Lincoln, NE)
Te lephone 1-402-467-5321
Fax: [phone]
Factory Service: 1-800-553-5992

Please include a note in the box which
supplies the company name, address, phone
number, a person to contact regarding the
repair, the type and quantity of equipment, a
description of the problem and the serial
number(s).

All shipments of product should be made via
UPS Ground, prepaid (you may request from
Factory Service a different shipment
method). Any shipment upgrades will be
paid by the customer. The equipment should
be shipped in the original packing carton. If
the original carton is not available, use any
suitable container that is rigid and adequate
sized. If a substitute container is used, the
equipment should be wrapped in paper and
surrounded with at least four)(4) inches of
excelsior or similar shock-absorbing
material. All shipments must be sent to the
following address and must include the
Proof of Purchase for warranty repair.Upon
completion of any repair the equipment will
be returned via United Parcel Service or
specified shipper, collect.

Factory Service Department

Telex Communications, Inc.
8601 East Cornhusker Hwy.
Lincoln, NE 68507 U.S.A.
Attn: Service

FCC Statement

This equipment uses, and can radiate radio
frequency energy that may cause
interference to radio communication if not
installed in accordance with this manual. Th e
equipment has been tested and found to
comply with the limits of a Class A
computing device pursuant to Subpart J, Part
15 of FCC Rules which are designed to
provide reasonable protection against such
interference when operated in a commercial
environment. Operation of this equipment in
a residential area may cause interference
which the user (at his own expense) will be
required to correct.

This product meets Electromag­netic Compatibility Directive 89/
336/EEC

Table

Of

Contents

Introduction ..........................................................................................1

External Connections and Controls ......................................................3

Operation .............................................................................................. 5

System Power ........................................................................................5

Initial BP-1002/2002 Setup ..................................................................5

Operating Modes ..................................................................................5

Changing Modes of Operation .............................................................6

Internal Switches, Jumpers and Adjustments .......................................6

Sidetone Adjustment (R145) ..................................................................7

Mic Gain Adjustment (R156) ................................................................7

Clear-Com Setup ...................................................................................8

BP-1002/2002 ....................................................................................... 8

Connector Pin Configurations .............................................................. 9

Specifications ...................................................................................... 10

Optional Football Modifications ........................................................11

General Description ...........................................................................11

Eliminating Mic-Kill and Call Signal .................................................11

Restoring Mic-Kill and Call Signal ....................................................11

CHAPTER 1

Intr oduction

WARNING: If you have a BP-1002/2002 with a 9030-7740-XXX circuit board,

you will need to obtain Revision H of this user manual.

®1

The Audiocom
two-channel intercom beltpacks. An internal switch and jumper setting allows the

units to be used with Clear-Com
jumper settings allow the unit to be uniquely configured to the operator’s
requirements.

BP-1002 and BP-2002 are microprocessor controlled one- and

®2

components, if desired. Other internal switch and

1. Audiocom® is a registered tradema rk of Telex Communications, Inc., Burnsville, MN

55337.

2. Clear-Com

®

is a registered trademark of Clear-Com Intercom Systems.

Introduction 1

FIGURE 1. BP-2002 & BP-1002 Connections and Controls

2 Introduction