Audio Authority BlueBeam C-1071 User Manual

Page 1
Page 2
WARNINGS
Authority cannot be held liable for the use of this hardware or any direct or indirect
Audio Authority reserves the right to revise any of its hardware and software
following its policy to modify and/or improve its products where necessary or
TRADEMARKS
Authority Corp. Copyright February, 2009.
Page 3
Table Of Contents
Troubleshooting
Page 4
Audio Authority offers an extensive line of audio and video switchers,
www.audioauthority.com or through authorized dealers.
Allows full control of DVD/Blu-ray playback and power on/off
Advanced customization possible using PC software via a USB interface
Activity indicator LED for user feedback
Page 5
When power is applied, the red LED starts flashing to indicate that the
Which power source is best for my installation?
Page 6
values, including any custom macros which may have been defined.
Page 7
will not respond.
A custom IR device code can be entered by selecting the “Custom” entry from
Allows for future features to be downloaded as a firmware upgrade.
Page 8
When all power sources are removed the BlueBeam should start flashing for
with a mini-USB connector. Open the BlueBeam software and select the “IR
Page 9
Weight
Windows 2000, Windows XP, Windows Vista (32 and
Page 10
for repair at a nominal charge, if not damaged beyond the point of repair. All
freight charges for out-of-warranty returns for repair are the responsibility of the
Authority makes no other warranties either expressed or implied, including
Additionally, there are no allowances or credits available for service work or
We appreciate your confidence in our products and services and will always
Page 11
Audio Authority Technical Service
Audio Authority Corporation
Page 12
www.audioauthority.com
Loading...