Audio TXP User Manual

User guide for the En2 TXPH Transmitter

Slide grip to the right
to open the battery
compartment.

On/Off Switch

Installing and removing batteries

To open the battery compartment, slide the grip to the right. This will unlock it and
the battery can be placed inside with the positive end uppermost.

To close the battery compartment, gently push down the flap until you hear a
clicking sound. The transmitter is now ready to use.

Switching the transmitter on and off

To turn the transmitter on, slide the switch to the left. To turn it off, slide the switch
to the right. The TXP will turn on and the OLED screen will display the following:

Default screen

Key

1 Battery level icon (displays ‘EXT’ when externally powered).
2 Menus Locked icon.
3 Current gain setting.
4 LF Cut active icon.
5 RF Output Power icon (Only displayed when ‘Low’ setting selected).
6 AF level indicator
7 Frequency
8 Frequency selection mode (P = PRESET, U = USER, TUNE = TUNE

mode).
9 Selected channel number (PRESET or USER modes only).
10 Overload indicator.

Enter Main Menu

To access the various transmitter parameters press and hold the navigation switch
located on the top of the transmitter, for 2 seconds to enter the menu. The main menu
will be displayed.

Accessing the Frequency option