
1) CE DECLARATION OF CONFORMITY
DISPOSAL
2) AN-E MODELS
3) INTRODUCTION
4) OVERVIEW
6) UNPACKING AND INSTALLATION
7) CONNECTION, INTERNAL CROSSOVER MODELS
9) CONNECTION, EXTERNAL CROSSOVER MODELS
11) OPERATION
12) TECHNICAL SPECIFICATIONS
13) WARRANTY INFORMATION
14) CONTACT INFORMATION

CE DECLARATION OF CONFORMITY
DISPOSAL
This product must not be disposed of as normal household waste. To
prevent possible harm to the environment please separate the product
from other waste to ensure that it can be recycled in an environmentally
safe manner. Please contact your retailer or the appropriate local
government office for collection facilities.
We declare under our sole responsibility that this product is in conformity
with the following standards or standardized documents:
BS EN 60065 in accordance with the regulations 73/23/EEC, 89/336/EEC
(from 1 January 1997)
CE 94
Peter Qvortrup,
Director
Audio Note (UK) Limited
25 Montefiore Road
Hove
East Sussex
BN3 1RD
United Kingdom
Tel: +44 (0)1273 220 511
Fax: +44 (0)1273 731 498

Thank you for purchasing this Audio Note (UK) product. With the correct care it
should give you many years of pleasure and enjoyment.
Please take the time to read all of the information in this manual before connecting
your new component to an electrical supply or your system, to ensure both your
safety and satisfaction.
Please note that due to our desire to continually improve products, specifications are
subject to change without notice. Therefore it is important to refer to the manual that
is supplied with your product for the most accurate information; manuals downloaded
from our website or obtained from other sources may no longer fully apply to your
product.
If you have any questions regarding the information contained within this document
or your new component, please feel free to contact us: -
Audio Note (UK) Limited
25 Montefiore Road
Hove
East Sussex
BN3 1RD
United Kingdom
Tel: +44 (0)1273 220 511
Fax: +44 (0)1273 731 498
e-mail: info@audionote.co.uk

1” tweeter & 8” standard paper bass driver with copper voice coils, 94 dB efficient, AN-D internal copper
speaker cable, internal crossover, copper inductors, chipboard cabinet material, vinyl wrap finish.
1” tweeter & 8” standard efficiency Hemp bass driver with copper voice coils, 94 dB efficient, AN-D
internal copper speaker cable, internal crossover, copper inductors, chipboard cabinet material, vinyl
wrap finish.
1” tweeter & 8” standard paper bass driver with copper voice coils, 94 dB efficient, single Audio Note™
LEXUS LX copper speaker cable, internal crossover, copper inductors, Russian Birch ply cabinet, real
wood veneers.
1” tweeter & 8” standard efficiency Hemp bass driver with copper voice coils, 94 dB efficient, single Audio
Note™ LEXUS LX copper speaker cable, internal crossover, copper inductors, Russian Birch ply cabinet,
real wood veneers.
1” tweeter & 8” high efficiency hemp bass driver with Audio Note™ silver voice coils, 97.5 dB efficient, 2
conductor Audio Note™ LEXUS LX copper cable, internal crossover, copper inductors.
1” tweeter & 8” standard paper bass driver with copper voice coils, 94 dB efficient, Audio Note™ AN-SPe
silver speaker cable, internal crossover, copper inductors. Russian Birch ply cabinet, real wood veneers.
1” tweeter & 8” standard efficiency Hemp bass driver with copper voice coils, 94 dB efficient, Audio
Note™ AN-SPe silver speaker cable, internal crossover, copper inductors. Russian Birch ply cabinet, real
wood veneers.
1” tweeter & 8” high efficiency hemp bass driver with Audio Note™ silver voice coils, 97.5 dB efficient,
Audio Note™ AN-SPe strand silver cable, internal crossover, copper inductors.
1” tweeter & 8” high efficiency hemp bass driver with Audio Note™ silver voice coils, 98 dB efficient, 1.5
meter bi-wired Audio Note™ LEXUS LX copper speaker cable, Audio Note™ solid copper wired
inductors with Audio Note™ copper foil capacitors in a separate non-magnetic aluminium chassis.
1” tweeter & 8” high efficiency hemp bass driver with Audio Note™ silver voice coils, 98 dB efficient, 1.5
meter bi-wired Audio Note™ AN-SPe speaker cable, Audio Note™ solid copper wired inductors with
Audio Note™ copper foil capacitors in a separate non-magnetic aluminium chassis.
1” tweeter & 8” high efficiency hemp bass driver with silver voice coils, 98 dB efficient, 1.5 meter Audio
Note™ AN-SPe silver cable, Audio Note™ 99.99% pure silver wired inductors with Audio Note™ copper
foil capacitors in a separate non-magnetic aluminium chassis.
1” tweeter & 8” high efficiency hemp bass driver with Audio Note™ silver voice coils, 98 dB efficient, 1.5
meter Audio Note™ AN-SPx silver cable, Audio Note™ 99.99% pure silver wired crossover inductors,
with hand adjusted crossover employing Audio Note™ copper foil signal capacitors in a separate nonmagnetic aluminium chassis.
1” tweeter & 8” hemp bass driver, 95dB efficient, Audio Note™ SOGON LX internal cable, custom made
ALNICO magnet on both tweeter and woofer, Audio Note™ silver wired voice coils and crossover
inductors, internal crossover with custom made polyester capacitors.
2-way rear ported enclosure with 1” tweeter & 8” bass driver, 96 dB efficient, Audio Note™ SOGON LX
silver speaker cable, ALNICO magnet on bass driver, Audio Note™ silver wired voice coils and Audio
Note 99.99% pure silver crossover inductors, Audio Note™ copper foil signal capacitors in a separate
non-magnetic aluminium chassis.
No expense spared all silver crossover exclusively with Audio Note™ silver foil capacitors, each
crossover is an external MEISHU size aluminium box and contains between 12 and 15kgs of pure Audio
Note™ 99.99% silver foil in the capacitors, the inductors are made from silk insulated Audio Note™
99.99% pure silver wire, adjusted to the closest tolerances possible +/- 0.1 dB between each speaker in
the pair, both the handmade tweeter and hemp paper woofer are equipped with AlNiCo magnets and
Audio Note™ silver voice coils, cabling is the SOGON LX which comes with an external bi-wired length to
the crossovers of 1.5 meters.
10” high mass black sprayed steel speaker stand. Self assembly, designed for filling with fine sand or
metal shot material to maximise mass
AN-E Speaker
Stand with internal
crossover
Optional for all speakers with external crossovers to house the large copper foil capacitors used in all the
SIGNATURE versions of the AN-E speakers, except for AN-E SOGON where the silver capacitors are
too large to fit within the cavity available