Audinate Dante AVIO Data Sheet

Wirelessly connect your computers
and mobile devices to a Dante
®
audio network via Bluetooth
The Dante AVIO Bluetooth® Adapter connects to your Dante network and supports 2 x 1 channels of wireless audio, allowing PCs and mobile devices to playout and receive audio with any of your Dante-enabled devices using only a Bluetooth® connection. Connect audio applications like media players and conferencing software to speakers, microphones, mixers and DSPs on your network. Cost effective, compact and built for the road, the Dante AVIO family of adapters bring the modern network connectivity that
every audio pro needs in their toolbox.
PLUG & PLAY
Each Dante AVIO Bluetooth® adapter is a complete, high performance Dante device, delivering all the automation and ease of use that have made Dante the most popular audio networking solution worldwide. The Dante AVIO Bluetooth® adapter is automatically discovered and ready to use when connected, and no separate power supplies are required – just use a common PoE (Power over Ethernet) switch and any Dante AVIO adapter is ready to go.
USE CASES
BLUETOOTH
Wirelessly connect any PC or mobile device to
your Dante audio network
No additional software or drivers required
Seamlessly migrate calls on mobile devices to
Dante-enabled conference room system
Channel routing is stored in the AVIO for
consistent connections when used with
any Bluetooth-enabled device
FEATURES
Plug & play operation
Built for the road
2 x 1 audio channels
24-bit audio support
Dante Audio over IP and AES67 RTP transport
formats
Power over Ethernet (PoE) support
Dante Domain Manager ready
®
DANTE AVIO BLUETOOTH® DATASHEET
THE CONVENIENCE OF WIRELESS,
SPECIFICATION AVIO BLUETOOTH
®
Audio channels
2 in, 2 out
Connectors
RJ45
Power
Class 1 802.3af PoE
Sample Rates
48 kHz
Bit Depth
24
Dante Device Latency
1, 2, or 5ms (congurable using Dante Controller)
Part Number
ADP-BT-AU-2X1
THE POWER OF DANTE
The Dante AVIO Bluetooth® adapter lets you leverage the audio quality and connectivity of your Dante audio networks while being as easy to use as any Bluetooth® headset or speaker. Simply pair the AVIO Bluetooth® adapter with your phone or PC for instant networked audio. Power is supplied via PoE, so there are no AC adapters to worry about.
BUILT FOR THE ROAD
We’ve made all Dante AVIO adapters road-ready and tour-tough. Sonically welded ABS enclosures and quality hardware are used throughout, while cable assemblies are stress-tested to ensure reliable operation under grueling conditions. Toss them in your toolbox, show after show.
ALL DANTE
Dante AVIO adapters are all fully functional Dante interfaces, with all the features you’d expect from Dante audio
networking. Each one delivers bit-perfect audio reproduction, super-low latency and sample-accurate synchronization across the entire network. All Dante devices automatically discover one another, and the entire system is managed by our easy-to-use Dante Controller software on any connected PC or Mac. Most importantly, every Dante device can connect to every other Dante device – no questions asked.
All Dante AVIO adapters are fully compatible with Dante Domain Manager (DDM) for IT-level security and management, while AES67 is supported for connection to non-Dante networks.
COST-EFFECTIVE
We’ve worked hard to make the Dante AVIO family of products a cost-effective addition to any system or piece of gear, so that everyone can enjoy the benefits of Dante. Audio networking has never been easier to or more affordable, no matter how you choose to use it.
WORLD WIDE OFFICES
Audinate Pty Ltd
Level 7 64 Kippax Street
Surry Hills NSW 2010
Australia
Tel: +61 2 8090 1000
Audinate Ltd
Suite 104
Werks Central
15-17 Middle St
Brighton, BN1 1AL
United Kingdom
Tel. +44 (0) 1273 921695
Audinate, Inc
1200 NW Naito Parkway
Suite 630
Portland, OR 97209
USA
Tel. +1.503.224.2998
Audinate Limited
Suite 1106-08, 11/
F Tai Yau Building
No 181 Johnston Road
Wanchai, Hong Kong
澳迪耐特有限公司 香港灣仔莊士敦道181號 大有大廈11樓1106-8室
Tel. +(852)-3588 0030
+(852)-3588 0031
info@audinate.com
www.audinate.com
Audinate, Dante and their logotypes are trademarks of Audinate Pty Ltd.
The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audinate is under license. Other trademarks and trade names are those of their respective owners.
Audinate products are covered by numerous patents. See https://www.audinate.com/ patents for details. © 2020 Audinate Pty Ltd. All rights reserved.
Dante AVIO Bluetooth® Marketing Datasheet 10-Aug-2020
DANTE AVIO BLUETOOTH® DATASHEET
Loading...