Aube Technologies TH110A-DP-P User Manual

MODEL TH110A-DP-P

VAC

B

B

B
B

240

60 HZ

SUMMARY

OPTIONS SELECTION

u

At the back of the thermostat, there are 3 selection switches to set at
your preferences.

Temperature in °C or °F, time in 12 or 24 hours and Early Start function.

u

TO SET TIME AND DAY

Press on DAY, HOUR and MIN buttons to adjust time and day.

u

TO RECORD THE (COMFORT) SETPOINT TEMPERATURE

Select chosen setpoint temperature by using or button. Press on

button (app. 3 seconds) until icon appears on display.

u

TO RECORD THE (ECONOMY) SETPOINT TEMPERATURE

Select chosen setpoint temperature by using or button.
Press on button (app. 3 seconds) until icon appears on display .

TO RECORD THE (VACATION) SETPOINT TEMPERATURE

u

To program the Vacation temperature, select the desired degree using the

buttons and press on the and buttons simultaneously

until the icon is displayed (app. 3 seconds).

u

OPERATING MODES

To select an operating mode, use MODE button.

AUTO:

MAN: Maintains the selected temperature. or changes

Runs the program. or shows temperature setting
and can override temporarily your programming up to the
next program.

the temperature setting.

BEFORE

AFTER

NOTE: All cables and connections must conform to the local electrical code.

WARNING: Special CO/ALR solderless connectors must be used when
connecting with aluminum conductors.

Power-up

Set the On/Off switch to On.

When power is applied for the first time, the
display must show the time 00:00, the room
temperature and the Manual mode icon ( ).
Other information might show up on the display if
installation is defective or does not comply with the
instructions.

NOTE: The On/Off switch set to Off will place the

thermostat in sleep mode. Ideal for sum­mertime.

OPERATING MODES

The TH110A-DP-P has two (2) operating modes.

MANUAL ( )

This mode allows you to maintain a constant temperature in the room.

To activate this mode, press on Mode button to display the icon.

1-

2- Set the desired temperature using the buttons or select the

pre-programmed or or settings.
(To select the setting, press on and simultaneously.)

AUTOMATIC ( )

This mode executes your own programming.

To activate this mode, press on Mode button to display the icon.
The or icon indicates which temperature setting is used. Also, the icon
of the program number will be shown.

Memory back-up

In the event of a power failure, an internal circuit will maintain the programming
and the time. But only the time could have to be set if power failure is more than
2 hours.

Early Start function

The thermostat is providing a built-in function enabling it to calculate the
optimum time to start the heating system to achieve the desired temperature
setting at the programmed time. This function could start the heating system as
early as 6 hours prior to the programmed time. To enable this function, set the
switch E.S. to “ON” at the back of the thermostat.

INSTALLATION

NOTE: The "Problems and Solutions" section at the end of this user's guide will

help you to correct your problems during the installation.

This thermostat has been designed to operate with any installation
which has a RESISTIVE load not exceeding 4000 W (16.67 A) @ 240 VAC
such as electric baseboards, radiant ceilings and floors, electric con
vectors, etc. It is not compatible with a low voltage controller used by
a central heating system.

Electricians or experienced technicians should install the thermostat.

This thermostat is designed to be used with a self-protected heating
system equipped with thermal cut off and circuit breaker.

PARTS INCLUDED

- One (1) TH110A-DP-P (240 VAC) thermostat

- Two (2) 6-32 screws

- Four (4) solderless connectors (for copper wire)

TURN OFF POWER OF THE HEATING SYSTEM A
PANEL TO AVOID ELECTRICAL SHOCK. Keep air vents of the thermostat clean

and free from obstructions.

T THE MAIN POWER

PROGRAMMING

Programming the time and day

1- Set the time using the Hour and Min buttons.
2- Set the day using the Day button.

Programming the Comfort, Economy and Vacation settings

The Comfort , Economy and Vacation settings respectively represent
the temperatures that you wish to have during the day , at night or while you
are away at work , or while you are away for an extended period .

920-110-003-00-1-A 1/2

To program your settings

a) To program the Comfort temperature, select the desired degree using the

buttons and press the button until the icon is displayed

(app. 3 seconds).

b) To program the Economy temperature, select the desired degree using the

buttons and press the button until the icon is displayed

(app. 3 seconds).

c) To program the Vacation temperature, select the desired degree using the

buttons and press on the and buttons simultaneously

until the icon is displayed (app. 3 seconds).

d) Press the Mode button to exit this function and return to the normal

operating mode.

To modify the Saturday and Sunday schedules:

6- Press on Day button until SA or SU is displayed.

7- Press on PGM button to select Prog. 1 ( ) and Hour and Min

buttons to enter 7:30 AM.

8- Press on PGM button to select Prog. 2 ( ) and then Clear button to

erase it.

9- Press on PGM button to select Prog. 3 ( ) and then Clear button to

erase it.

10- Press on PGM button to select Prog. 4 ( ) and then Hour and Min

buttons to enter 11:00 PM.

11- Press on Mode button to exit this function.

Schedule programming

The TH110A-DP-P allows 4 setting changes for each day of the week. There are
no pre-set programs.The programs are tailored to perfectly adapt to your life
style. The principle is very simple. For each day, enter the time at which you wake
up (P1), the time you leave for work (P2), the time you arrive back home (P3) and
the time you go to bed (P4).

Program

1

2

3

4

For savings to be obtained, you must lower the temperature for a period of 2 to 3
times the delay required to bring the temperature back to your comfort level.

Example : If your system takes one hour to go from your saving temperature level
to your comfort temperature Ievel, it is useless to lower the temperature for a
period less than 2 to 3 hours.

a) To program your schedule

1- Press on PGM button to access the programming mode.

Press on Day button to select the day to be programmed. You can select

2-

all days of the week by pressing on Day button for 3 seconds.

3- Press on PGM button to select program 1, 2, 3 or 4.

4- Press on Hour and Min buttons to program the time.

5- When you have completed your programming, press on Mode button

to exit this function.

Mode

Time

Wake-up time

Leaving time

Return time

Bed time

Temporary or permanent temperature bypass

This operation allows you to temporarily modify the room temperature while you
are in the Automatic mode. Simply press on or button to select the desired
temperature, or the or button to select the Comfort or Econo settings you
have programmed.This temperature will be maintained until the beginning of the
next programmed schedule.

You can also switch to the Vacation setting for a prolonged absence by pressing
on and at the same time.The display will show icon. In that case,
the derogation is permanent. To return to the normal operating mode, press on
Mode button.

If you wish to immediately return to the programmed settings, press on Mode
button twice.

CHARACTERISTICS

• Model: TH110A-DP-P (240 VAC)

• Supply: 240 VAC, 50/60 Hz

• Load: 16.67 A maximum (resistive only)

• Power: 4000 watts (NI) @ 240 VAC

• Approvals: CSA / UL

• Display range: 0 to 60 °C (32 to 140 °F)

• Setting range: 5 to 30 °C (40 to 85 °F)

• Comfort default setting: 20 °C (68 °F)

• Econo default setting: 18 °C (64 °F)

• Vacation default setting: 10 °C (50 °F)

• Storage: -20 to 50 °C (-4 to 120 °F)

b) To erase a program :

Select the program using PGM and Day buttons, and press on Clear
button. The time field displays --:-- when the program is inactive.

c) Example 1 : Comfort period from 7:00 AM to 10:30 PM

1- Press on PGM button to access the programming mode.

2- Press on Day button 3 seconds to select every day of the week.

3- Press on Hour button to enter 7:00 AM, Prog. 1 ( ).

4- Press on PGM button again to select Prog. 2 ( ), and press on

Hour and Min buttons to enter 10:30 PM.

5- Press on Mode button to exit this function.

d) Example 2 : Comfort period: Monday to Friday from 6:15 AM to

Schedule/Day

PROG. 1

PROG. 2

PROG. 3

. 4

PROG

NOTE: It is faster to program the same schedule for every day and then

Economy period from 10:30 PM to 7:00 AM
Identical schedule for all days of the week.

8:15 AM and from 5:00 PM to 10:00 PM.
Saturday & Sunday from 7:30 AM to 11:00 PM.

MON.

6:15 AM

8:15 AM

10 PM

modify the exception days.

5 PM

TUES.

6:15 AM

8:15 AM

5 PM

10 PM

WED.

6:15 AM

8:15 AM

5 PM

10 PM

THU.

6:15 AM

8:15 AM

5 PM

10 PM

FRI.

6:15 AM

8:15 AM

5 PM

10 PM

SAT.

7:30 AM

---

---

11 PM

SUN.

7:30 AM

11 PM

WARRANTY

AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY

This product is warranted against material defects and workmanship in normal
use for a period of one year, from the date of the original purchase from
authorized dealers. During this period, AUBE technologies inc. will repair or
replace the product with a new or of equivalent quality at AUBE'S option, without
charge, any product proven defective in normal use.

Warranty does not cover transportation costs. Nor does it cover a product
subjected to misuse or accidental damage. This warranty does not cover the cost
of installation, removal or reinstallation.

This limited warranty is in lieu of all other warranties, obligations or liabilities
expressed or implied by the company. In no event shall AUBE technologies inc.
be liable for consequential or incidental damages resulting from installation of this
product. Some states or provinces do not allow limitations on how long an implied
warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above exclusions or limitations may not apply to you. This
warranty gives you specific legal rights and you may also have other rights which
vary from state to state.

The defective product and the original sale receipt must be returned to the
original dealer or shipped pre-paid, insured and addressed to:

---

---

Aube technologies inc., 705 Montrichard, Iberville (Quebec),
Canada, J2X 5K8
www.aubetech.com
[e-mail]

If you have any questions concerning the installation or programming of this
product, please call our technical assistance at [phone] for the Montreal

area or 1-800-831-AUBE for outside area, Monday to Friday between
8:30 AM and 5:00 PM Eastern time.

1- Press on PGM button to access the programming mode.

2- Press on Day button 3 seconds to select every day of the week.

3- Press on Hour and Min buttons to enter 6:15 AM, Prog. 1 ( ).

4- Press on PGM button to select Prog. 2 ( ) and Hour and Min buttons to

enter 8:15 AM.

5- Repeat step 4 to enter Prog. 3 (5:00 PM) and Prog. 4 (10:00 PM).

NOTE: When making modifications, make sure you are in the right

program.

05/07/02 920-110-003-00-1-A 2/2