ATV VLB7IR User Manual

VLB7IR

Waterproof Infrared

Illumination Camera

Instruction Manual

VER.:1.0, NO.: R040557A/2-MN

1

CAUTION

RISKOF ELECTRIC

SHOCK

. DO

NOTO

PEN

!

CAUTION : TO REDU

CE T

HE R

ISK O

F ELECTRICAL SHOCK,DO NOTOPEN COVERS.

NO USER SERVICEABLEPAR

TS I

NSID

E. R

EFE

R SERVICINGTO QUALIFIED

S

ERVICE PERSONNEL.

Disposal of Old Elect rical & Elect ronic Equi pment (Ap plicable in

Thank you very much for purchasi ng our product. B efore operating t his
product, please read this instruction manual carefully to ensure proper use.

1. Safety Precautious

the European U ni on an d oth e r Eu ro pe an c ou nt ri es wit h s ep arate
collection systems).

 When in use, please avoid camera window directly contacting the eyes

and do not touch the camera body, for it can be heated up to 70℃.

 When installing the camera, please avoid pointing it directly to paper or

flammable materials.

 Although the camera is provided with tempered glass, please

avoid all direct contact to eliminate contamination, and use cotton
balls dipped in cleaning alcohol to clean the window.

2. Description

This inbuilt Infrared Illuminator camera uses a high sensitive interline
transfer Charge Coupled Device (CCD) image sensor, and all state
circuitry, which provides extremely long life and high reliability. This
camera offers excellent image quality and functions with low lag and
high burn resistance, and is not subject to distortions from magnetic
fields.

Highly resistant to shock and vibration and easy to install, this

camera is an excellent choice for your CCTV system.

2

Item

Name of Part

Quantity

1

Infrared Camera

1

Appurtenances Bag

1

A

Fix Retaining Screw for Bracket

3

B

Anchor 3 3

Instruction Manual

1

3. Feature

 Built-in high quality CCD camera and high performance infrared

illuminator module.

 Pixel number: NTSC=480K/ PAL=570K for ultra high resolution,

NTSC=380K/ PAL=440K for high resolution, and NTSC=250K/
PAL=290K for normal resolution models.

 High sensitivity, low smear, excellent anti-blooming and high S/N ratio.
 Supports functions: Auto Electronic Shutter (AES), Auto Gain

Control (AGC), Auto White Balance (AWB), Back Light
Compensation (BLC), Flickless mode (FL), and Noise Reduction
(NR function depends on model type).

 3.6mm Built-in board Lens. and furnished with mounting bracket.
 DC type power request, low power consumption.
 Dual Window Structure to Prevent Reflection and Diffusion of

Infrared Light.

 Furnished with mounting bracket and 3-Axis Concealed Cable

Bracket.

 IP rating: IP68.

4. Content

2

2

5. Installation & Operation

1. Install Preparation

Drill holes on wall if wires need to go through the wall.

2. Install Camera

Use the 3 screws pro vided to attach t he camera and brac ket to the
ceiling, surface or wall.

3

3. Adjust 3-Axis Bracket

Adjust the bracket while checking the view angle from the monitor.
Loosen the bracket lock knob by turning count erclockwise, after
adjusting the 3-Axis bracket (X-Y-Z Axis) to get the desired
viewing angle, tighten the lock knob by turning it clockwise.

4. Install Sunsheid

To install the sunshield, please follow the instruction shown below:

4

NTSC: 976x494

PAL: 976x582

NTSC: 1/60S~1/100,000S

PAL: 1/50S~1/100,000S

24 IR
LED ON

System Device

6. SPECIFICATIONS

According to the camera purchased, select and refer to the appropriate specification below:

Image Device

Pixel Elements

Resolution 700 TVL

Min Illumination 0.01Lux/ F1.2

S/N Ratio More than 48dB

Electronic Shutter

Gain Control Auto

White Balance Auto

Scanning System Interlace 2:1

Gamma 0.45

Lens Furnished 3.6mm Board L ens

Sync. System Internal

Video Output 1Vp-p/ 75 Ohms

Power Supply DC 12V±10％

Power
Consumption

IR OFF

Infrared Illuminator Module

Infrared Luminary 24 IR LED

Wavelength 850nm

Illuminant Distance 20M (24 IR LED)

Power Supply

Power Consumption 3 W (24 IR LED)

Operating Temp.

Construction Aluminum Case

IP Rating IP 68

Dimensions φ53x58 (L) mm (Body only)

(Note: Design and specifications are subject to change without prior notice.)

1/3” SONY SUPER HAD II

90mA max.

340mA max.

DC 12V±10％

-10 ℃ to 50℃ (14℉ to 122℉)