ATV HDB454 Installation Manual
INSTALLATION MANUAL
NO
PART NAME
Q’TY
DESCRIPTION
1
WALL MOUNT BRACKET
1
Aluminum Die Casting
2
CONDUIT ADAPTER
1
Aluminum Die Casting
3
CONDUIT PLATE
1
Aluminum 1.2T
4
CONDUIT GASKET
1
Silicon
5
SCREW MACHINE
2
M4 x 8L
NO
PART NAME
Q’TY
DESCRIPTION
6
PLASTIC ANCHOR
4
Anchor (Ø6 mm)
7
SCREW TAPPING
4
PTS1 M6 x 35L
8
SCREW MACHINE
4
BH M4 x 16L
9
SCREW MACHINE
4
FC M4 x 12L
WALL MOUNT
ASSEMBLE PARTS LIST
DOME BRACKET INSTALLATION
Attach the wall mount bracket to the structure using the tapping screw (PLASTIC ANCHOR, PTS1
M6x35L) as illustrated in the figure. The wall mount bracket must be attached to a structure such as
hardwood, wall stud, concrete or a suitable material capable of supporting the final mount assembly.
ACCESSORY
PRODUCT FEATURES
Light duty Wall Mount
Die cast and aluminum
Maximum load 6.61 lb [3.0 kg]
This mount is light duty wall mount
Designed for use wit
This mount is for use in wall mounting
Application and is capable of supporting
Loads up to 6.61 lb [3.0 kg]
SPECIFICATION
GENERAL
Enclosure mounting Machine screw [supplied] Construction Aluminum Die casting
Dimension See dimensional outline Finish Polyester power coat
Weight Unit 2.09 lb [0.95 kg] Maximum load 6.61 lb [3.0 kg]
HOLE
DIAMETER
MOUNT POINT
DESCRIPTION
H2
100.0 mm 3 BH M4 x 16L
H3
87.5 mm 2 BH M4 x 16L
H4
71.0 mm 3 BH M4 x 16L
N1
94.5 mm 2 BH M4 x 16L
N2
88.6 mm 3 BH M4 x 16L
N3
68.5 mm 2 BH M4 x 16L
N4
98.0 mm 2 BH M4 x 16L
DIMENSION (mm)
50304406A
Loading...