ATV HDB453 Installation Manual
INSTALLATION MANUAL
NO
PART NAME
Q’TY
DESCRIPTION
1
PLASTIC BUSHING
3
Anchor (Ø6 mm)
2
MOUNT BASE
1
PF1.25" Tap Aluminum
3
SCREW MACHINE
4
BH M5 x 8L
4
SCREW TAPPING
3
M6 L=35.0mm
5
PIPE STRAIGHT
1
Ø42.0 Aluminum
6
O-RING PIPE
2
Ø3.0 Gasket Rubber
7
CONDUIT BOX
1
PT 1" M35 Tap Aluminum
8
GASKET
1
Sillicon Rubber
9
CONDUIT PLATE
1
Aluminum 1.2T
10
SCREW MACHINE(FC)
4
FC M4 x 12
11
SCREW MACHINE
4
BH M4 x 16
NO
PART NAME
Q’TY
DESCRIPTION
1
PLASTIC ANCHOR
3
Anchor (Ø6 mm)
2
SCREW TAPPINHG
3
PTS1 M6 x 35L
3
SCREW MACHINE
4
BH M4 x 16L
4
SCREW MACHINE
1
BH M5 x 8L
CEILLING MOUNT
DOME BRACKET INSTALLATION
Attach the ceilling mount bracket to the structure using the tapping screw (PLASTIC ANCHOR, PTS1
M6x35L) as illustrated in the figure. The wall mount bracket must be attached to a structure such as
hardwood, wall stud, concrete or a suitable material capable of supporting the final mount assembly.
ASSEMBLE PARTS LIST
ACCESSORY
PRODUCT FEATURES
Light duty Plastic Wall Mount
Die cast and aluminum
Maximum load 11.02 lb [5.0 kg]
This mount is light duty wall mount
Designed for use wit
This mount is for use in wall mounting
Application and is capable of supporting
Loads up to 11.02 lb [5.0 kg]
SPECIFICATION
GENERAL
Enclosure mounting Machine screw [supplied]
Construction Aluminum Die casting Dimension See dimensional outline
Finish Polyester power coat Weight Unit 2.68 lb [1.22 g]
HOLE
DIAMETER
MOUNT POINT
DESCRIPTION
H2
100.0 mm 3 BH M4 x 16
H3
87.5 mm 2 BH M4 x 16
H4
71.0 mm 3 BH M4 x 16
N1
94.5 mm 2 BH M4 x 16
N2
88.6 mm 3 BH M4 x 16
N3
68.5 mm 2 BH M4 x 16
N4
98.0 mm 2 BH M4 x 16
DIMENSION (mm)
50304407A
Loading...