ATV HDB344 Installation Manual
PLASTIC WALL MOUNT BRACKET INSTALLATION
NO
PART NAME
Q’TY
DESCRIPTION
1
PLASTIC WALL MOUNT BRACKET BASE
1
PC ABS
2
PLASTIC WALL MOUNT BRACKET COVER
1
PC ABS
3
TAPPING SCREW
2
M5 X 30L
4
TAPPING SCREW
3
M4 X 15L
5
PLASTIC ANCHOR
2
M5 X 30L
6
TEMPLATE SHEET
1 - 7
MANUAL
1
-
Align the two holes at the top of the
wall mount with the M5 screws in the
wall and slide entire assembly onto the
screws. Connect cables.
Secure the supplied mounting bracket
cover.
M5 PLASTIC ANCHOR
M5 TAPPING SCREW
Attach the template sheet to the wall.
Install the supplied M5x30L anchors
and M5 tapping screws in noted hole
locations.
Assemble the camera bottom case onto
the wall mount bracket base using
supplied M4 screws. Use the mounting
holes noted in the figure that follows.
Attach the plastic wall mount bracket to the structure using the tapping screw (PLASTIC ANCHOR, PTS1
M5x30L) as illustrated in the figure. The plastic wall mount bracket must be attached to a structure such as
hardwood, wall stud, concrete or a suitable material capable of supporting the final mount assembly. The
installer may need to change the method of mounting or hardware used depending on the wall material.
Use the supplied M4 tapping screws to align the wall mount bracket holes to dome housing holes.
* PLASTIC WALL MOUNT BRACKET PARTS LIST
* NOT INVOLVED IN PRODUCT.
PRODUCT FEATURES
Light duty Plastic Wall Mount
Maximum load 4.4 lb [2.0 kg]
Easy and safe to install
DOME HOUSING TYPE PER MOUNT HOLE
Select the camera dome model being installed. The “N” number corresponds to the mounting holes used.
N.2 N.3 ** MOUNT HOLE NUMBER **
N.4 N.5
N.6 N.7
N.7 N.8
N.9
DIMENSION (mm)
50303758A
Loading...