ATV FDP690WDR User Manual

FDP690WDR

WARNING

The exclamation point within an equilat eral tri angl e is intended to alert the user to the

Cleaning

Clean the unit with a slightly dam p sof t c loth.
Use a mild household detergent. Never use strong solvents such as thinner or Benzene as they might damage
the finish of the unit.

Retain the original carto n and pac

Installation

Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE
VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOL

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of un-insulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

PRECAUTIONS

king materials for safe transport of this unit in the future.

3

4

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that prod uce heat .

9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accesso r ies specif ied by the manufa ct ur er.

12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been moisture, does not operate normally,
or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT PERFORM ANY SERVICING OTHER THAN THA T CONTAI NED IN THE
OPERATING INSTRUCTIONS UNLESS YOU QRE QUALIFIED T O DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 po
wer source only.

5

INTRODUCTION

Camera Model Features:

● 1/3" PIXIM CMOS (Seawolf DPS)

● Wide Dynamic Range (WDR)

● Built-in NTSC/PAL video encoder (OSD select)

● 690HTLV-E / 540HTVL resolution

● 0.1Lux @ F1.2, 50IRE Sensitivity

● 1/25 - 1/30,720 sec electronic shutter

● OSD (On Screen Display)

● AGC (Auto Gain Control)

● DNR function

● Auto and manual white balance modes

● BLC (Back Light Compensation)

● 12 Privacy Zones (Polygonal Mosaic, White / Black / Red)

● DSS (x2 ~ x32)

● Day & Night (Auto / Color / BW)

● Activity Detection (4 Alarm zones)

● Digital Pan / Tilt / Zoom (1x ~ 4x zoom)

● Synchronization Internal / AC line lock

● Functions (Flip, Sharpness, Freeze, Focus Detector, Flickerless)

● 2.8-12mm Day/Night A/I Varifocal Lens F1.2~360

● 9-22mm Day/Night A/I Varifocal Lens F1.4~360

● Test Monitor Output

● Operates on 12VDC or 24VAC

● Use Certified / Listed Class 2 power source only

6

CAMERA CONNECTIONS

1. Lens : A/I Vari-focal lens for wide area monitoring

. Power : 24V AC input / 12V DC input

2

power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz

Use Certified/Listed Class 2 power supply transformer only.

*If using DC 12V power adaptor, use a power supply capable of supplying 6 Watts.

3. Video : BNC connector used to connect the camera to a monitor, switcher, etc

..