ATV FD600EDN User Manual

600TV Lines

Super High

Resolution

Color Camera

3-AXIS PLASTIC DOME CAMERA

Please read this manual thoroughly before use, and keep it handy for future reference.

Design and specifications are subject to change without notice.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

CAUTIONCAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.

PRECAUTIONS

Safety ----------------------------------------- Installation -----------------------------------

Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by the qualified
personnel before operating it any further.

Unplug the unit from the wall oulet if it is not going to
be used for several days or more. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.

Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials(curtains, draperies)
that may block the ventilation holes.

Height and vertical linearity controls located at the
rear panel are for special adjustments by qualified
personnel only.

Do not install the unit in an extremely hot or
humid place or in a place subject to excessive
dust, mechanical vibration.

Cleaning --------------------------------------

Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use
strong solvents such as thinner or benzine as
they might damage the finish of the unit.

Retain the original carton and packing
materials for safe transport of this unit in the
future.

- ii -

FCC COMPLIANCE STATEMENT

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS
OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN
A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.

NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE
THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

- iii -

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4 . Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A po la ri ze d pl ug h as t wo b la de s wi th o ne w id er t ha n th e ot he r.
A gr ou nd in g ty pe p lu g ha s tw o bl ad es a nd a t hi rd g ro un di ng p ro ng .
The w id e bl ad e or t he t hi rd p ro ng a re p ro vi de d fo r yo ur s af et y. If t he
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.

11. On ly u se a tt ac hm en ts /a cc es so ri es s pe ci fi ed b y th e ma nu fa ct ur er.

12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer,
or sold with the apparatus.
When a cart is used,use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or when unused for
long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, suc h as
power-supply cord or plug is damaged, liquid has been moisture, does
not operate normally, or h as b ee n dr op pe d.

15. CAUTION THESE SERVICING INSTRUCTIONS AR E FO R US E BY
QUALIFIED SERVICE PERSONNEL ONLY. TO R ED UC E TH E RI SK
OF ELECTRIC SHOCK DO NOT PERFORM AN Y SERVICING OTHER
THAN THAT CO NTA IN ED I N TH E OP ER ATING INSTRUCTIONS
UNLESS YO U QR E QU AL IF IE D TO D O SO .

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.

- iv -

INTRODUCTION

The camera provides high-quality images using Sony CCD technology especially
designed for closed-circuit television (CCTV) and security surveillance

Features:

High resolution and high performance Sony Supe r HAD

Excellent picture quality

600 lines(Color) of resolution

0.1 lux(Color), 0.04lux(B/W) @ F1.2 50IRE Sensitivity

Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic shutter modes

OSD (On Screen Display)

Auto and manual white balance modes

DWDR

OSD Font Color (16 Color)

BLC (Back Light Compensation)

Day&Night (Auto / DAY / NIGHT / EXT)

Private Mask (8 position, 16 Colors)

AGC (Auto Gain Control)

MIRROR (ON/OFF)

VIDEO OUT BNC

Motion Detection(4 point)

HLC (High Light Compensation)

DPC (Dead Pixel Cancellation)

mm A/I Varifocal Lens F1.2

2.8~12

9 mm A/I Varifocal Lens F1.4

~22

4-9mm A/I Varifocal Lens F1.6

Operates in AC24V +/- 10% / DC12V +/- 10%

Use Certified / Listed Class 2 power source only

Test monitor Output

(D&N Lens option)

(D&N Lens option)

(D&N Lens option)

TM

Technology

applications.

IMPORTANT : The user of this camera is responsible for
checking and complying with local, state, and federal laws
and statutes concerning the recording and monitoring of
audio signals.

1

CAMERA CONNECTIONS

3

1

1. Lens : A/I Vari-focal lens for wide area monitoring.

2. Power : 24V AC input / 12V DC input

power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz
Use Certified/Listed Class 2 power source only.

*If using DC 12V power adaptor,

use a power supply capable of supplying 5 Watts.

3. Video : BNC connector used to connect the camera to a monitor, switcher, etc.

2

(D&N with ICR model option)

REMINDER:

Never aim the camera directly into the sun.

2