Page 1
600TV Lines
Super High
Resolution
Color Camera
3-AXIS INFRARED - LED PLASTIC
Please read this manual thoroughly before use, and keep it handy for future reference.
Design and specifications are subject to change without notice.
DOME CAMERA
Page 2
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.
CAUTION
CAUTIONCAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
PRECAUTIONS
Installation -----------------------------------
Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust,
mechanical vibration.
Cleaning --------------------------------------
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong solvents such as thinner or benzine as
they might damage the finish of the unit.
Retain the original carton and packing materials for safe transport of this unit in the future.
- ii -
Page 3
FCC COMPLIANCE STATEMENT
FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED
AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS
OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN
A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.
NORME NMB-003 DU CANADA.
CE COMPLIANCE STATEMENT
WARNING
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE
THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.
- iii -
Page 4
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4 . Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer,
or sold with the apparatus.
When a cart is used,use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been moisture, does
not operate normally, or has been dropped.
15. CAUTION THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU QRE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.
- iv -
Page 5
INTRODUCTION
The camera provides high-quality images using Sony CCD technology especially
designed for closed-circuit television (CCTV) and security surveillance
Features:
High resolution and high performance Sony Supe r HAD
Excellent picture quality
600 lines(Color) of resolution
0.1 lux(Color), 0 lux(B/W, IR LED ON) @
Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic shutter modes
OSD (On Screen Display)
Auto and manual white balance modes
DWDR
OSD Font Color (16 Color)
BLC (Back Light Compensation
Smart IR
30EA, 850mm IR LED
Day&Night (Auto / DAY / NIGHT / EXT)
Private Mask (8 position, 16 Colors)
AGC (Auto Gain Control)
MIRROR (ON/OFF)
VIDEO OUT BNC
Motion Detection(4 point)
HLC (High Light Compensation)
DPC (Dead Pixel Cancellation)
mm A/I Varifocal Lens F1.2
2.8~12
9 mm A/I Varifocal Lens F1.4
~22
4-9mm A/I Varifocal Lens F1.6
Operates in AC24V +/- 10% / DC12V +/- 10%
Use Certified / Listed Class 2 power source only
Test monitor Output
Camera Mount : camera mount directly to the wall or ceiling
F1.2 50IRE Sensitivity
(D&N Lens option)
(D&N Lens option)
(D&N Lens option)
TM
Technology
applications.
1
Page 6
CAMERA CONNECTIONS
3
1
1. Lens : A/I Vari-focal lens for wide area monitoring.
2. Power : 24V AC input / 12V DC input
power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz
Use Certified/Listed Class 2 power source only.
*If using DC 12V power adaptor,
use a power supply capable of supplying 7 Watts.
3. Video : BNC connector used to connect the camera to a monitor, switcher, etc.
2
(D&N with ICR model option)
REMINDER:
Never aim the camera directly into the sun.
2
Page 7
CONTENTS of PACKAGE
The package contains the following.
Camera in Housing 1
Instruction Manual (This Document) 1
Accessory Kit for Installing 1
1Drilling guide label
BASE INSTALLATION
1. Make mounting holes and cable hole in the place (ceiling or wall) to which this
dome camera is installed using the Drilling guide label.
Dome body
3
Page 8
2.
To remove dome cover, turn the dome body counterclockwise until locators
reach end of travel and pull off.
Push the liner on the sides where the patterns are put in the teeth of a comb
and pull it out.
CEILING / WALL
Drilling Guide Label
tion(PA5)
P
osi
l in
i l g
Dr
Plastic anchor
Screw Tapping (M6)
3. Attach the housing to the ceiling using suitable fasteners, M6x35 tapping
screws are supplied only use if they are suitable.
Turn the housing to right direction about 16 degrees to lock in place.
4. The assembly of the dome body and liner is in reverse order of disassembly.
Finally, lock dome body with locking screw(M3X5) from the accessory kit.
4
Page 9
- Video out check-
UP
F
E TL
C
N2
D
OW
N
EO
D
O
T V
O
P
S
Joystick Switch Board
Test Monitor
T
H
RIG
7
Page 10
STRUCTURE OF THE SETUP MENU
<SETUP>
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
<LENS>
DC
MANUAL
<EXPOSURE>
SHUTTER
BRIGHTNESS
AGC
DWDR
RETURN
<WHITE BAL> <DAY NIGHT>
ATW1
ATW2
AWC -> SET
MANUAL
<DPC>
COVER THE LENS
THEN
PRESS ENTER KEY
<SPECIAL>
CAM TITLE
MOTION
PRIVACY
PARK.LINE
LANGUAGE
RETURN
<BACKLIGHT>
OFF
BLC
HLC
<IMAGE ADJUST>
LENS SHAD.
2 DNR
MIRROR
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY
NEG.IMAGE
RETURN
8
AUTO
COLOR
B/W
EXT
<RESET>
FACTORY
RETURN
Page 11
LENS (Selection)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to point to
'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
?
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
Note The brightness of the screen can be adjusted in DC mode.
ATW1
AUTO
?
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
MANUAL
ATW1
OFF
AUTO
EXPOSURE
The EXPOSURE menu is used to set the automatic light control method for this camera.
1) SHUTTER Select the shutter mode.(Auto,1/60(50), FLK~ 1/100,000 sec)
2) BRIGHTNESS Adjust BRIGHTNESS level (0 ~ 255)
Can be adjusted while in DC/ manual lens mode.
3) AGC Auto gain control (OFF / LOW / MIDDLE / HIGH)
4) DWDR Digital Wide dynamic range
LENS
EXPOSURE
?
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
Can be changed while in shutter mode.
OFF / ON
ATW1
AUTO
(Xtended Dynamic Range)
EXPOSURE
SHUTTER AUTO
BRIGHTNESS IIIIIIIIIIIIIIIIII 50
AGC ---D-WDR OFF
RETURN RET
9
Page 12
WHITE BAL
The screen color can be adjusted by using the WHITE BALANCE function.
1) ATW1 Set the color temperature 2500 K 10000K
2) ATW2 Set the color temperature 2000 K 13000K
3) AWC -> SET Please press the ENTER button white the camera is directed
at a piece of white paper to obtain the optimum state under
current illumination. if the environment including the light source
is changed, you have to adjust the white balance again.
o o
o o
4) MANUAL Manual mode. User can change R and B Gain manually.
INDOOR Set the color temperature to 3200 K
OUTDOOR Set the color temperature to 6300 K
o
o
<WHITE BAL MANUAL MODE>
LENS
EXPOSURE
?
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
ATW1
AUTO
WHITE BAL MANUAL
?
COLOR TEMP OUTDOOR
BLUE -----------RED -----------RETURN RET
BACKLIGHT
1) BLC Prevents such a back light effect to secure a clear image under all
illumination environments
2) HLC The function improves the identification capability of subjects facing a
brightly lit situation by filtering out the strength of the light
< MODE> BACKLIGHT
LENS
EXPOSURE
WHITE BAL
?
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
ATW1
AUTO
BACKLIGHT BLC
AREA SEL AREA1
AREA STARE ON
GAIN IIIIIIIIIIIIIIIIII042
HEIGHT 005
WIDTH
LEFT/RIGHT IIIIIIIIIIIIIIIIII005
TOP/BOTTOM IIIIIIIIIIIIIIIIII005
RETURN RET
IIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIII
004
BACKLIGHT HLC
LEVEL IIIIIIIIIIIIIIIIII 200
MODE NIGHT ONLY
RETURN RET
10
Page 13
DAY NIGHT
The DAY/NIGHT menu is used to configure the day and night related setting for this camera.
This camera can turn the IR(infrared)filter on or off.
Mode : AUTO / COLOR / B/W / EXT (The EXT is not operating in this mode)
<DAY NIGHT AUTO MODE>
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
?
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
ATW1
AUTO
DAY NIGHT AUTO
?
D -N LEVEL IIIIIIIIIIIIIIIIII128
D-N DELAY 5 SEC
N-D LEVEL IIIIIIIIIIIIIIIIII 003
N-D DELAY 5 SEC
RETURN RET
<DAY NIGHT B/W MODE>
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
?
DAY NIGHT
DPC
SPECIAL
IMAGE ADJ
RESET
E XIT
ATW1
AUTO
DAY NIGHT B/W
BURST OFF
?
IR SMART ON
IR LEVEL HIGH
RETURN
RET
IR SMART
?
IR GAIN IIIIIIIIIIIIIIIIII 074
HEIGHT IIIIIIIIIIIIIIIIII 007
WIDTH IIIIIIIIIIIIIIIIII 008
LEFT/RIGHT IIIIIIIIIIIIIIIIII 003
TOP/BOTTOM IIIIIIIIIIIIIIIIII 004
RETURN RET
*The IR LEVEL is not operating in DAY NIGHT B/W mode.
DPC
DPC Auto setting (Dead pixels are automatically removed)
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
?
SPECIAL
IMAGE ADJ
RESET
E XIT
ATW1
AUTO
DPC
COVER THE LENS
THEN
?
PRESS ENTER KEY
11
PROCESSING NOW
Page 14
SPECIAL
1) CAM TITLE
A
CAM TITLE
B
←→CLRPOSEND
C
2) MOTION
AREA SELECT Select MD area number. (AREA1 ~AREA4)
AREA STATE Select MD ON/OFF
HEIGHT Adjust height of MD area
WIDTH Adjust width of MD area
LEFT/RIGHT Adjust the location of the MD area with boundary LEFT and RIGHT.
TOP/BOTTOM Adjust the location of the MD area with boundary TOP and BOTTOM
DEGREE Adjust sensitivity of MD area.(0~255)
VIEW The screen displays with pink dots. When a motion is detected
in the selected area, the pink dots are displayed on the screen.
A. CAM TITLE
B. Character Table
C. Command Line
← : Move to left
.
→ : Move to right
CLR : Erase all characters
POS : Move the position of title
END : Save and End
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
?
SPECIAL
IMAGE ADJ
RESET
E XIT
ATW1
AUTO
SPECIAL
CAM TITLE
?
MOTION
PRIVACY
PARK.LINE
LANGUAGE
RETURN
12
ON
ON
OFF
OFF
ENGLISH
RET
MOTION
?
AREA SELECT AREA1
AREA STATE ON
HEIGHT IIIIIIIIIIIIIIIIII 4
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
RETRURN
OFF
4
IIIIIIIIIIIIIIIIII
2
IIIIIIIIIIIIIIIIII
2
IIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIII
RET
38
Page 15
3) PRIVACY
AREA SELECT Select MASK area number.(Area 1 ~ Area 8)
AREA STATE Select MASK ON/OFF
HEIGHT
WIDTH
LEFT/RIGHT Adjust the location of the MASK area with boundary LEFT and RIGHT
TOP/BOTTOM Adjust the location of the MASK area with boundary
COLOR Select MASK color. (0~15)
RETURN
Adjust height of MASK area
Adjust width of MASK area
TOP and BOTTOM.
<PRIVACY MODE>
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
?
SPECIAL
IMAGE ADJ
RESET
E XIT
ATW1
AUTO
SPECIAL
CAM TITLE
MOTION
?
PRIVACY
PARK.LINE
LANGUAGE
RETURN
OFF
OFF
ON
OFF
ENGLISH
RET
PRIVACY
AREA SELECT AREA1
?
AREA STATE
HEIGHT IIIIIIIIIIIIIIIIII 032
WIDTH IIIIIIIIIIIIIIIIII 032
LEFT/RIGHT IIIIIIIIIIIIIIIIII 020
TOP/BOTTOM 030
COLOR IIIIIIIIIIIIIIIIII 000
RETURN
ON
IIIIIIIIIIIIIIIIII
RET
4) PARK.LINE Select Parking area
SPECIAL
CAM TITLE
MOTION
PRIVACY
?
PARK.LINE
LANGUAGE
RETURN
OFF
OFF
OFF
ON
ENGLISH
RET
PARK. LINE
?
LT 077
LB 029
RT
RB
F
N
T
RET
5) LANGUAGE ENGLISH or CHINESE
6) RETURN RET
13
122
170
013
058
009
Page 16
IMAGE ADJUST
1) LENS SHAD Adjust Lens shading level (0~255)
2) 2DNR
3) MIRROR
4) FONT COLOR Select FONT COLOR level (0~15)
Select IDR TITLE level (0~15)
5) CONTRAST
6) SHARPNESS
7) DISPLAY
8) NEG. IMAGE
<IMAGE ADJUST MODE>
IMAGE ADJUST
LENS SHAD
?
2DNR
MIRROR
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY
NEG.IMAGE
RETURN
Select 2DNR ON/OFF
Select MIRROR ON/OFF
Adjust CONTRAST level (0~255)
Adjust SHARPNESS level (0~31)
Select DISPLAY mode (CRT /LCD/USER)
Select Negative image mode ON /OFF
ON
ON
OFF
IIIIIIIIIIIIIIIIII 122
21
IIIIIIIIIIIIIIIIII
CRT
OFF
RET
LENS SHAD
?
LEVEL IIIIIIIIIIIIIIIIII 006
RETURN RET
IMAGE ADJUST
LENS SHAD
2DNR
MIRROR
?
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY
NEG.IMAGE
RETURN
ON
ON
OFF
IIIIIIIIIIIIIIIIII 122
IIIIIIIIIIIIIIIIII 21
CRT
OFF
RET
FONT COLOR
?
FONT
ID&TITLE IIIIIIIIIIIIIIIIII 003
RETURN RET
IIIIIIIIIIIIIIIIII 003
14
Page 17
IMAGE ADJUST
LENS SHAD
2DNR
MIRROR
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY
?
NEG.IMAGE
RETURN
ON
ON
OFF
IIIIIIIIIIIIIIIIII 122
IIIIIIIIIIIIIIIIII 21
CRT
OFF
RET
CRT ADJUST
?
?
?
PED LEVEL IIIIIIIIIIIIIIIIII 022
COLOR GAIN IIIIIIIIIIIIIIIIII 192
RETURN RET
LCD AJUST
GAMMA 0.50
PED LEVEL
COLOR GAIN IIIIIIIIIIIIIIIIII 160
RETURN
USER AJUST
GAMMA 0.45
PED LEVEL IIIIIIIIIIIIIIIIII 028
COLOR GAIN IIIIIIIIIIIIIIIIII 160
RETURN RET
028
IIIIIIIIIIIIIIIIII
RET
RESET
1) FACTORY Returns to the level which was set by the manufacturer for shipment.
EXIT
1) EXIT Saves all settings and exits.
15
Page 18
LENS ADJUSTMENT (OPTIONAL VARIFOCAL LENS)
Field of view: Adjust setting from Tele (T)
to Wide (W) field of View.
Focus: Adjust lens focus from near
(N) to infinity ( ).
DC AUTO IRIS LENS
2.8-12mm
Image Size 1 / 3 " C C D
Focal Length
Aperture Ratio
Angular
Field of View
2.8-12mm 5%
1 : 1.2 5%
DIAGONAL
2.8mm : 119.9
12mm : 28.80
LENS
1 / 3 " C C D
o
o
9-22mm
9-22mm 5%
1 : 1.4 5%
DIAGONAL
9mm : 40.2
22mm : 16.1
Control ( + )
Control ( - )
Drive ( + )
Drive ( - )
T
N
W
Adjust Focus
Adjust Angular Field View
4-9mm
1 / 3 " C C D
4-9mm 5%
1 : 1.6 5%
o
o
DIAGONAL
4mm : 92.4
9mm : 39.2
o
o
16
Page 19
SPECIFICATIONS
MODEL
Power source
Power
Power consumption
Image sensor
Total pixels
Scanning system
Scanning frequency
Sync. system
Electronic Shutter
General
Resolution
Min. illumination
IR LED / Sensor
LED Lighting Distance
Video Output
S/N Ratio
Camera Control OSD (Joystick Switch)
Lens
Shutter
Brightness
Backlight
AGC
DWDR
White Balance
F
Day & Night
Burst
U
D&N
IR Smart
B /
N
W
IR Smart Gain
C
Camera Title
Motion Detection
T
Privacy Masking
I
Parking Line
S
Lens Shading
P
O
E
2DNR
C
N
Mirror
I
Font Color
A
L
Contrast
Sharpness
Display
Nega Image
Language
DPC
Reset
Power input
Video output
Lens Mount
Connector
&
Lens
etc.
Operating temperature
Operating humidity
External Dimension
Weight
NTSC
AC24V ± 10% / DC12V ± 10%
410mA (5 Watts) - IR LED ON
1/3" Sony Super HAD
811(H) x 507(V)
15.734KHz(H) x 59.94Hz(V)
1/60 ~ 1/100,000 sec. 1/50 ~ 1/100,000 sec.
0.1 Lux(Color), 0 Lux(B/W, IR LED ON) @ F1.2, 50IRE
IR LED 30EA(850nm / 40 degree) , Sensor 1EA
AUTO, 1/60(1/50), Flickeless, 1/250 ~ 1/100,000sec
OFF / BLC / HLC(High Light Compensation)
OFF / LOW / MIDDLE / HIGH
ATW1 / ATW2 / AWC->SET / MANUAL
AUTO / COLOR / B&W / EXT
FONT 16 COLOR, ID&TITLE 16 COLOR
Dead Pixel Cancellation (Auto 64 Points)
FACTORY RESET / RETURN
f=2.8~12mm F1.2~360 Varifocal, ICR (D&N) /
f=9-22mm F1.4-360 Vafiocal,ICR (D&N) /
f=4-9mm F1.6~360 Varifocal, ICR (D&N)
14 F ~ 122 F (-10 C ~ +50 C)
Internal
30m
0 ~255
OFF/ON
OFF / ON
OFF / ON
0~255
OFF / ON
OFF / ON
OFF / ON
OFF / ON
0~255
0~31
OFF / ON
2-pin wire
Fixed mount
400g
795(H) x 595(V)
15.625KHz(H) x 50Hz(V)
2:1 interlace
600 TV lines (COLOR)
1.0 Vp-p (75 ohm, Composite)
More than 50dB (AGC off)
MANUAL / DC
OFF / ON (4 area)
OFF / ON (8 position)
OFF / ON(0~255)
CRT / LCD / USER
ENGLISH / CHINESE
BNC connector
o o o o
0 ~ 96% (non-condensing)
146( ) x 113(H) mm
PAL
17
Page 20
EXTERNAL DIMENSION
Dimensions
145.6
113
59
100 (Inner)
Unit: mm
Window Size
Cable Entry
Weight - Unit:
Shipping:
0.1 in. (2.5mm thick),
impact-resistant P.C (LEXAN)
3.93 in. (10cm) diameter
One 1" opening holes
0.88 lb. (0.4kg)
1.41 lb. (0.64 kg)
50303083A
Loading...