ATV CZ6T2812UWCI User Manual
Operating Manual
USER'S INSTRUCTIONS
Vandal-proof Dome
High Resolution
DNR Day/Night
Color Camera
USER’S MANUAL
In USA and Canada, Use Class 2 Power Supply Only
2
USER’S MANUAL
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7)
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet. Consult an electrician for replacement of the obsolute outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, conveniance
IMPORTANT SAFETY INSTRUCTIONS
amplifiers) that produce heat.
-
third
repeptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
11)
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
12)
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been moisture, does not operate normally, or has been dropped.
3
USER’S MANUAL
Contents
◑ General Features
◑ Installing & Adjusting
◑ Dimension & Specification
◑ OSD Control Button
◑ Camera Menu Set Up
1. Menu Set Up
2. Lens Setting
3. Exposure Setting
4. White Balance Setting
5. SSDR Setting
6. Backlight Setting
5
6
7
8
9
9
10
11
12
13
7. DNR3 Setting
8. Day/Night Setting
9. Special Setting
10. Exit Setting
◑ Trouble Shooting
14
15
16
20
21
4
USER’S MANUAL
General Features
◑
Ultra High Sensitivity
-
The built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W,
or lower illumination.
◑
600TV Lines
By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD,
the camera produces clear picture quality with a horizontal resolution of 600 TV lines for
color and a horizontal resolution of 700TV lines for BW mode.
◑
DNR3
IR-LED ON)
- dna esion niag thgil-wol sevomer ylevitceffe pihc PSD V-W ecnamrofrep-hgih ehT
provide clear images even in dark environments.
◑
Day & Night
-
This camera has a function that automatically selects the mode that is appropriate for
daytime or night-time conditions. The COLOR mode operates in daytime conditions to
provide optimum colors, and BW mode operates in night-time conditions to enhance the
definition of the image.
◑
SSDR
- For images with high contrast between bright and dark Areas from difficult lighting
such as backlighting, this camera selectively illuminates darker Areas while retaining the same
◑
Miscellaneous Functions
- HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION
DETECTION and PRIVACY functions are provided.
ghosting to
conditions
light level for brighter Areas to even out the overall brightness.
◑
Disk Saving Effects
- Up-most and advanced DNR technology camera picture quality has a disk saving effects due
Image sizes are smaller than standard CCTV camera image.
◑
Controlled by OSD Menu
.neercs rotinom eht no deyalpsid txet unem eht gnitceles yb dellortnoc eb nac aremac ehT -
to
5
USER’S MANUAL
INSTALLING & COMPONENTS
1. Installation
Ø5 tapping screw x 4 (supplied) M4 Machine screw x 4 (supplied)
- Affix the mounting template to the mounting surface
- Using the L-wrench provided, loosen 4 screws by turning them and separate the dome cover
- Drill holes on the celling by matching to the holes on the case bed. Fix the case bed on the ceilling by
using tapping screws.
- Pass the power and video cable through the hole you want to pass them when mounting the main body
on the mounting bracket.
- Point a camera gimball to a desired derection and assemble a dome cover to the flush mounting base
with socket screws by using L-Wrench provided.
2. Components
● CAMERA 1piece ● Instruction Manual 1piece ● Mounting Template 1piece
● Service Monitor Cable 1piece ● Tapping Screw 4pieces ● L-wrench 1piece
6
USER’S MANUAL
DIMENSION & SPECIFICATION
1. Dimension & Connection
Dimension Connection
2. Specification
Model A-CZ6T2812UWC A-CZ6T2812UWCI
Image Pick-Up Device
TV System
Total Pixels
Scanning Frequency
Scanning System
Synchronization
Resolution
Minimum Illumination
S/N Ratio
Video Output
Electronic Shutter Speed
OSD
SSDR
BLC
Day & Night
Gain Control
White Balance
SENS-UP
Privacy Masking
DNR3 (Digital Noise Reduction)
Digital Zoom
DIS (Digital Image Stabilizadion)
Sharpness
Filp / Mirror
Power Supply
Power Consumption
IR Length
Lens
Operational Temp.
Storage Temp.
Dimension
Weight
1/3” Sony Super HAD CCD
NTSC
811(H) * 508 ( V )
768(H) * 494 ( V )
15.734KH z(H) & 59.94H z(V)
2:1 Inter lace
Internal / Line -Lock
600T V Lines
IR LED OFF: 0 .15 Lux, IR LED ON: 0 Lux
More than 52dB
CVBS : 1.0Vp-p / 75Ω
1/ 60sec~1/ 120,000sec
Available
On / O
BLC / HLC / OFF
Color / BW / AUTO
Low / High /
ATW / Outd oo r / Ind oor / Manual / AWC (1,700°K ~ 11,000°K)
Auto / O
On / O
On / O
On / O
On /
On / O Level adjustable)
On /
DC 12V / AC 24V Dual Voltage
Dome : DC12V 220mA , HEATER ON 400mA / AC24V 105mA , HEATER ON 170mA
IR LED Dome : IR LED ON : DC12V 650mA, HEATER ON 860mA / AC24V 570mA , HEATER ON 650mA
Max 30M (IR LED 33pieces)
DC Auto Iris Varifocal Lens(2.8-12mm)
-35 ~ +60 Deg C. RH95% MAX.
-20 ~ +60 Deg C. RH95% MAX.
146mm( W) * 105 mm(H) * 146mm(D)
1500g
Level adjustable)
Selectable x2 ~ x512)
Programmable Zones)
Level adjustable)
x1 ~ x16)
6
Loading...