ATV CTV36PB User Manual

Quick Installation

G U I D E

Tower Camera

Please read this manual thoroughly before use, and keep it handy for future reference.
Design and specifications are subject to change without notice.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.

CAUTION

CAUTIONCAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.

PRECAUTIONS

Installation -----------------------------------

Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust,
mechanical vibration.

Cleaning --------------------------------------

Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong solvents such as thinner or benzine as
they might damage the finish of the unit.

Retain the original carton and packing materials for safe transport of this unit in the future.

- ii -

FCC COMPLIANCE STATEMENT

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS
OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN
A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.

NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.

iii

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4 . Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with th e
manufacturer's instructions.

8. Do not install near any heat sources such as radiators, he at r eg is te rs ,
stoves, or other apparatus (including amplifi er s) t ha t pr od uc e he at .

9. Do not defeat the safety purpose of the polarized or grounding-t yp e
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The w id e bl ad e or t he t hi rd p ro ng a re p ro vi de d fo r yo ur s af et y. If t he
provided plug does not fit into your outlet, co ns ul t an e le ct ri ci an f or
replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pi nc he d pa rt ic ul ar ly
at plugs, convenience receptacles, and the point where th ey e xi t fr om
the apparatus.

11. On ly u se a tt ac hm en ts /a cc es so ri es s pe ci fi ed b y th e ma nu fa ct ur er.

12. Use only with the cart, stand, tr ip od , br ac ke t,
or table specified by the manufacture r,
or sold with the apparatus.
When a cart is used,use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or wh en u nu se d fo r
long periods of time.

14. Refer all servicing to qualified service pers on ne l. S er vi ci ng i s
required when the apparatus has been damaged in any way, suc h as
power-supply cord or plug is damaged, liquid has been moisture, doe s
not operate normally, or h as b ee n dr op pe d.

15. CAUTION THESE SERVICING I NS TR UC TI ON S ARE FOR USE BY
QUALIFIED SERVICE PER SO NN EL O NLY. TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT PE RF OR M ANY SER VI CI NG O TH ER
THAN THAT CO NTA IN ED I N TH E OP ER ATIN G IN ST RU CT IO NS
UNLESS YO U QR E QU AL IF IE D TO D O SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or C er ti fi ed /L is te d
Class 2 power source only.

iv

1. Features

Blends into the environment for transaction application

User adjustable height 19.3" ~ 26.3" (Height control range : 7")

1" Height Interval to adjust the height

Adjustable Lens Tilting Angle -10 ~ +10

Adjustable Base Panning Angle -45 ~ +45

High resolution and high performance 1/3" Sony Super HAD Technology

Excellent picture quality

600 lines(Color) of resolution

0.1 lux(Color), 0.04 lux(B/W) @ F1.2 50IRE Sensiti

Auto electronic shutter [1/60(1/50) ~ 1/100,000]

Auto white balance

AGC (Auto Gain Control)

2D DNR

3.6mm Fixed Lens

Operates in DC 12V-15V +/- 10%

TM

vity

2. Camera Connections

Video Output BNC connector used to connect
the camera to a monitor, digital video recording
system.

Power Input DC12V~15V input Power supply included.

[ TOP VIEW ]

1

3. Installation

[ Installation 1 ]

Fasten the tower camera base to the surface of
the counter using the mounting screws (x3) and
orient the camera in the desired position.
A drilling template is provided for accurate placement.

MOUNTING SCREW (3x)

PLASTIC ANCHOR (3X)

TEMPLATE SHEET (1X)

using the solid base with the double-sided adhesive tape.

Attach the tower camera to the surface

MACHINE SCREW (3x)

INSTALLATION PLATE (1x)

DOUBLE SIDED TAPE

2

[ Installation 2 ]

4. How to use

Min Height
=491.2mm(19.3")

429.7mm(16.9")

THE RANGE OF PANNING ANGLE : -45 ~ +45

Max Height
=669.0mm(26.3")

[ FRONT VIEW ]

607.5mm(23.9")

90.0

[ TOP VIEW ]

A

[ BOTTOM VIEW ]

3

To adjust the panning position
of the tower camera,
uncrew the "A" point.

20.0

THE RANGE OF TILTING ANGLE : -10 ~+10

Adjust tilt to desired position using the lever.
A single threaded lever is used to adjust both
elevation and tilt angle by moving it from one
position to the other.

THE LOCK POINT FOR POSITIONING
OF THE TOWER CAMERA
(THE MOVABLE DISTANCE : 7" INCH)
(THE DISTANCE OF HOLES : 1" INCH APART)

Pull out the spring loaded lever to adjust
the camera's height then push the lever to lock
the camera.

The lever may be removed for security
by unscrewing it.

[ BACK VIEW ]

[ SIDE VIEW ]

Two knockouts for cable entry.

4

5. Specifications

Power

Genera l

F
U
N
C
T

I
O
N

Connec tor

&

etc.

MODEL

Power so urce
Power co nsumpt ion
Image sensor
Total pixels
Scanni ng system
Scanni ng frequ ency
Sync. system
Electronic shu tter
Resolu tion
Min. ill uminat ion
Video out put
S/N ratio

Auto Exposure

White Balance

Day& Nig ht

2D-DNR

AGC
Power i nput
Video ou tput
Lens mou nt
Lens
Operating temp eratur e
Operating humi dity

External dimen sion

Weight

NTSC

DC 12V-15V ±10%

130mA(1.5 Watts)

1/3" Sony Super HAD CCD

811(H) × 507(V)

2:1 interlace

15.734KHz(H), 59.94Hz(V)
Internal

1/60 ~ 1/100,000 sec.

0.1 Lux (Color), 0.04 Lux(B/W) @ F1.2, 50 IRE

2.9"(W) X 19.3"~26.3"(H) X2.9"(D), Base 5.2" X 5.2"

600 TV lines (Color)

1.0 Vp-p (75 ohm, composite)
more than 50dB (AGC off)

14°F~122°F (-10°C~+50°C)

ON

AUTO (ATW)

AUTO

ON

AUTO

Terminal Block

BNC connector

Fixed mount

f=3.6mm Fixed Lens

0 ~ 96% (non-condensing)

1.1Kg

5

Quick Installation

G U I D E

Tower Camera

PRINTED IN KOREA

50303099A