ATV CMH28PB, CMH28PZ User Manual

Quick Installation
G U I D E
Quick Installation
G U I D E
JAM Camera
JAM Camera
50302451A
Please read this manual thoroughly before use, and keep it handy for future reference. Design and specifications are subject to change without notice.
WARNINGS AND CAUTIONS:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
CAUTION:
CAUTIONCAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
PRECAUTIONS
Safety ----------------------------------------- Installation -----------------------------------
Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it any further.
Unplug the unit from the wall oulet if it is not going to be used for several days or more. To disconnect the cord, pull it out by the plug. Never pull the cord itself.
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials(curtains, draperies) that may block the ventilation holes.
Height and vertical linearity controls located at the rear panel are for special adjustments by qualified personnel only.
Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust, mechanical vibration.
The unit is not designed to be waterproof. Exposure to rain or water may damage the unit.
Cleaning --------------------------------------
Clean the unit with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish of the unit.
Retain the original carton and packing materials for safe transport of this unit in the future.
FCC COMPLIANCE STATEMENT IMPORTANT SAFEGUARDS
FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED
AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
NORME NMB-003 DU CANADA.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat..
9. Do not defeat the safety purpose of the polarized or grounding-type Plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
thy
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
15. Do NOT use power source other than that specified.
16. Use only Class 2 power source or Adaptor that provied by the Manufacturer.
1. Feature
High Resolution 540TVL Color Camera 130 Wide Angle 2.8mm lens Standard BNC / Power Pin connections Available in a Black Case Operates in DC12V
2. Camera Connections
[ FRONT VIEW ]
3. Installation
TEMPLATE SHEET
DOUBLE SIDED TAPE
JAM CAMERA
Video Output BNC connectors used to connect the camera to a monitor, digital video recording system.
Power Input DC12V input Power supply included.
1 2
4. Dimensions
44.0mm
44.0mm
[ FRONT VIEW ] [ BACK VIEW ] [ SIDE VIEW ]
4mm
Detph=approx.31.0mm
3 4
5. Specigications
CABLE
Power
General
Connector
&
etc.
MODEL
Power source Power consumption Image sensor Total pixels Scanning system Scanning frequency Sync. system Electronic shutter Resolution Min. illumination Video out put S/N ratio
F
Auto exposure
U
White Balance
N C
Gain Control
T
I
Gamma
O
BLC
N Power input Video ou tput Lens mount Lens Operating temperature Operating humidity External dimension Weight
NTSC
DC12V ±10%
Max 1.5 Watts
1/3" Color CCD
811(H) × 507(V)
2:1 interlace
15.734KHz(H), 59.94Hz(V) Internal
1/60 ~ 1/100,000 sec.
520 TV lines
1.0 lux @ F1.2, 50 IRE
1.0 Vp-p (75 ohm, composite) more than 50dB (AGC off)
ON
ATW Fix
AUTO
0.45
ON
DC JACK
BNC connector
Fixed mount
2.8mm Fixed mount
32°F ~ 104°F (0°C ~ +40°C)
0 ~ 96% (non-condencing)
44x44x35mm(WxHxD)
65g
Fasten the jam camera base to the surface of the mullion using the double-sided tape and orient the camera in the desired position. Please locate the word "TOP" on the back of the jam camera and when installing make sure that it is placed top
7 85 6
Loading...