ATV C540TDNVL User Manual

INSTRUCTION MANUAL

540TV Lines Super

High Resolution Color Camera

1/3'' INTERLINE TRANSFER CCD

HIGH RESOLUTION

ISSUE 1 - OCTOBER 2008

LIMITATION OF LIABILITY

THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE
ACCURATE IN ALL RESPECTS, HOWEVER, WE CANNOT ASSUME
RESPONSIBILITY FOR ANY CONSEQUENCES RESULTING FROM
THE USE THEREOF. THE INFORMATION CONTAINED HEREIN IS
SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR NEW
EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO
INCORPORATE SUCH CHANGES.

- ii -

WARNINGS AND CAUTIONS:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.

CAUTION:

CAUTIONCAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.

PRECAUTIONS

Safety ----------------------------------------- Installation -----------------------------------

Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by the qualified
personnel before operating it any further.

Unplug the unit from the wall oulet if it is not going to
be used for several days or more. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.

Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials(curtains, draperies)
that may block the ventilation holes.

Height and vertical linearity controls located at the
rear panel are for special adjustments by qualified
personnel only.

Do not install the unit in an extremely hot or
humid place or in a place subject to excessive
dust, mechanical vibration.

The unit is not designed to be waterproof.
Exposure to rain or water may damage the unit.

Cleaning --------------------------------------

Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use
strong solvents such as thinner or benzine as
they might damage the finish of the unit.

Retain the original carton and packing
materials for safe transport of this unit in the
future.

- iii -

FCC COMPLIANCE STATEMENT

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS
OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN
A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.

NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.

- iv -

IMPORTANT SAFEGUARDS

1. READ AND RETAIN INSTRUCTIONS

Read the instruction manual before operating the
equipment. Retain the manual for future reference.

2. CLEANING

Turn the unit off and unplug from the power outlet
before cleaning. Use a damp cloth for cleaning.
Do not use harsh cleansers or aerosol cleaners.

3. ATTACHMENTS

Do not use attachments unless recommended by
manufactured as they may affect the functionality of
the unit and result in the risk of fire, electric shock or
injury.

4. MOISTURE
Do not use equipment near water or other liquids.

5. ACCESSORIES
Equipment should be installed in a safe, stable
location. Any wall or shelf mounting accessory
equipment should be installed using the manufacture's
Instructions. Care should be used when moving
heavy equipment. Quick stops, excessive force, and
uneven surfaces may cause the equipment to fall
causing serious injury to persons and objects.

6. VENTILATION

Openings in the equipment, if any, are provided for
ventilation to ensure reliable operation of the unit and
to protect if from overheating. These openings must
not be blocked or covered

7. POWER SOURCES

The equipment should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supplied at the
installation location, contact your dealer. For
equipment designed to operate from battery power,
refer to the operating instructions.

8. GROUNDING OR POLARIZATION

Equipment that is powered through a polarized plug
(a plug with one blade wider than the other) will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. Do not defeat the
safety purpose of the polarized plug.

Alternate Warning: If the equipment is powered
through a three-way grounding-type plug, a plug
having a third (grounding) pin, the plug will only fit into
a grounding-type power outlet. This is a safety
feature. Do not defeat the safety purpose of the
grounding-type plug. If your outlet does not have the
grounding plug receptacle, contact your local
electrician.

9. CORD AND CABLE PROTECTION

Route power cords and cables in a manner to
protect them from damage by being walked on or
pinched by items places upon or against them.

10. LIGHTNING

For protection of the equipment during a lightning
storm or when it is left unattended and unused for
long periods of time, unplug the unit from the wall
outlet. Disconnect any antennas or cable systems

that may be connected to the equipment.

11. OVERLOADING

Do not overload wall outlets and extension cords

12. SERVICING

Do not attempt to service the video monitor or
equipment yourself as opening or removing

13. DAMAGE REQUIRING SERVICE

Unplug the equipment from the wall outlet and refer
servicing to qualified service personnel under the
Following conditions:

A. When the power supply cord or the plug has
been damaged.
B. If liquid has spilled or objects have fallen intothe
Unit.
C. If the equipment has been exposed to water or
other liquids.
D. If the equipment does not operate normally by
following the operating instructions, adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other controls
may result in damage to the unit.
E. If the equipment has been dropped or the casing
Damaged.
F. When the equipment exhibits a distinct change in
performance.

14. REPLACEMENT PARTS

When replacement parts are required, be sure the
service technician uses replacement parts specified
by the manufacturer or that have the same
characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.

15. SAFETY CHECK

Upon completion of any service or repairs to the
equipment, ask the service technician to perform
safety checks to verify that the equipment is in proper
operating condition.

16. FIELD INSTALLATION

The installation of equipment should be made by a
qualified service person and should conform to all
local codes.

17. CAUTION - THESE SERVICING
INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE
RISK OF ELECTRIC SHOCK DO NOT
PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.

18. Use certified/Listed Class 2 power supply transformer
Only.

- v -

This will prevent damage to the equipment due
to Lightning or power-line surges.

as this can result in a risk of fire or electric shock.

covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified
service personnel.