ATV BHR7212MR User Manual

DNR Super High Resolution

Outdoor Bullet Camera

Please read this manual thoroughly before use, and keep it handy for future reference.

INSTRUCTION MANUAL

Day & Night Color Camera

WARNINGS AND CAUTIONS

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

REFFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOC K

CAUTION

Safety

Should any liquid o r solid object fall i nto the cabinet,
unplug the unit and have it checked by
qualified personnel before operating it any further.

Unplug the unit fr om the wall outl et if i t is not goi ng to
be used for several
To disconnect the co rd, pull it out b y the plug. Never
pull the cord itself.

Allow adequate air circula tion to prevent inter nal heat
build-up. Do not place the u nit on sof t surfaces (rugs,
carpets, sofas, etc.) or near materials (curtains,
draperies) that may block the ventilation holes.

Height and vertical linearity controls located on the
rear panel are for special adjustments by qualified
personnel only.

Installation

Do not install t he u ni t i n an extremel y hot or humid place
or in a place subject to excessive dust, mechanical
vibration.

The unit is not designed to be waterproof.
Exposure to rain or water may damage the unit.

Cleaning

Clean the unit with a slightly dam p sof t c loth.
Use a mild household detergent. Never use strong
solvents such as thinner or benzine as they might
damage the finish of the unit.

Retain the original carton and pack ing m aterials fo r safe
transport of this unit in the future.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT
THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

EXPLANATION OF GRAPHICAL SYMBOLS

DO NOT OPEN

is intended to alert the user to the presence of uninsulated ''dangerous
voltage'' within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.

The lightning flash with arrowhead symbol, within an equilateral triangle,

PRECAUTIONS

days or more.

ii

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the saf ety purpose of th e polarized or grounding-type plu g.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your saf ety. If the provid ed
plug does not fit into your outlet, co nsult an electric ian for replacem ent of
the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience r eceptacles, and the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table
specified by the manuf acturer, or s old with the appara tus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when
unused for long periods of time.

14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, suc h as power-sup ply cord or pl ug
is damaged, liqui d has been mois ture, does not oper ate normally, or has
been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE TH E RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.

iii

FCC COMPLIANCE STATEMENT

TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL

RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN

NMB-003 DU CANADA .

INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RUL ES. THESE LIMITS ARE DESIGNED

INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO
CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE
REQUIRED TO CORRECT THE INTERFERENCE AT HIS OW N E XPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED

BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME

CE COMPLIANCE STATEMENT

WARNING: This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take
adequate measures.

iv

CONTENTS OF PACKAGE

Installation of the camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes.

Carefully remove the color camera and its accessories from the carton
and verify that they were not damaged in shipment.

The contents of the package include:

1. Camera in Housing _____________________1

2. Instruction Manual (This Document) ________1

3. Accessory Kit for installing _______________1

4. Drilling guide label _____________________1

5. Spot out cable ________________________1

v

TABLE OF CONTENTS

INTRODUCTION ----------------------------------------------------------------------------------------- 1

CAMERA CONNECTION & CONTENSTS of PACKAGE ------------------------------------- 2

CONTENTS of PACKAGE & QUICK INSTALL ------------------------------------------------- 3

OSD MENU STRUCTURE ---------------------------------------------------------------------------- 5

AUTO WHITE DEFECT & LENS ADJUSTMENT ---------------------------------------------- 12

SPOT OUT / JOY STICK KEY --------------------------------------------------------------------- 13

EXTERNAL DIMENSION ---------------------------------------------------------------------------- 14

SPECIFICATIONS ------------------------------------------------------------------------------------- 15

vi

INTRODUCTION

IMPORTANT : The user of this camera is responsible for

The camera provides high-quality images using SONY 1/3” CCD and digital
Signal process LSIs.

Features:

● 1/3" HAD CCD Ⅱ for an image of high sensitivity

● 2.8~12mm D/N Vari-focal(D C AI) / 5~50mm D/N Vari-focal(DC AI)

● Digital Wide Dynamic Range (Adaptive Tone Reproduction)

● Excellent picture quality

● 700 lines of resolution

● Minimum illumination 0.15 Lux (Color) / 0 Lux (B/W & IR ON)

● Auto electronic shutter [1/60(1/50) ~ 1/10,000] and manual electronic

shutter modes

● OSD (On Screen Display)

● Auto and manual white balance modes

● Auto BLC and HLC, Day & Night (Auto)

2D-NR

●

● Smart IR

● Privacy Zone 4 point, Motion Detection 4 Point

● MIRROR, SHARPNESS, HUE, CONTRAST, GAIN

● AGC (Auto Gain Control)

● VIDEO OUT (BNC)

● Operates in 12VDC or 24VAC

(If using DC 12V power adaptor, Please use a power supply capable of
supplying over 600mA.)

● Use Certified / Listed Class 2 power source only.

● Auto White Defect

● Heater Option (ONLY 24VAC)

checking and complying with local, state, and federal laws and
statutes concerning the recording and monitoring of audio
signals.

1