ATTOWAVE STR65 User Manual
OWNER’S MANUAL
STINGER S650
ALL-BAND RADAR AND LASER DETECTOR
WITH VG-2, POP™ AND ULTRA-X /
ULTRA-K MODES RADAR DETECTION
Contents
• Contents 2
• Congratulations! 3
• Package Contents 3
• Identifying parts of the unit 3
• Basic Features and Controls 4
• Feature descriptions 5
• Installing the Unit 5
Mounting guidelines 5
Windshield mounting 5
Hook-and-Loop Mounting 6
Changing the Panel 6
• Operation 7
• Power On 7
• Volume control 7
• Blue backlit display 7
• Mute on/off selection (Mute mode) 7
• Highway/City mode selection 7
• Tutorial mode 8
• Compass Calibration Set-up 10
• Menu Mode 10
1. Voice Alert Language selection 11
2. VG-2 detection On/Off selection 11
3. Voice Alert On/Off selection 11
4. Tone selection 11
5. Compass display selection 11
• Pulse Protection 11
• Memory confirmation 11
• Troubleshooting 12
• Care and Maintenance 13
• Specifications 14
Stinger S650 2 Radar detector
Congratulations!
You have purchased the STINGER S650, the newest radar/laser detector.
The STINGER S650, incorporates the advanced new antenna technology
and extremely low power-consuming circuitry to ensure top-class
performance. The STINGER S650, is a complete integrated laser/radar
detector, which detects all police radar guns, including Ultra-X and Ultra-K
pulse mode radars, as well as laser guns.
Besides, STINGER S650 is able to detect signals of VG-2 (devices detecting
radar-detectors).
The STINGER S650, provides distinct visual and audio alerts to warn you of
the presence of X-, K-, Ka- band and VG2 radar signals as well as laser
signals in front of you for 180º round.
You can drive with confidence when you bring along the STINGER S650.
Note: Some local regions and federal regulations may prohibit the use of
detection device. Please check with authorities regarding the use of this
device in your area before operating it.
Package Contents
Your STINGER radar/laser detector package includes the following
components:
• The STINGER S650 radar/laser detector
• Changeable Panel (2ea)
• Windshield mounting bracket with suction cups (3ea) and bumper
• Coiled 12-volt DC power cord
• Dashboard mounting hook and loop fasteners (1ea)
•
Operation manual
Identifying parts of the unit
Power Cord Spare Fuse Mounting Bracket
Stinger S650 3 Radar detector
Fastener Tape Changeable Panel STINGER 650
Basic Features and Controls
Stinger S650 4 Radar detector
Feature descriptions
• protection against all radar bands (X, K, and super wide Ka)
• 360° laser coverage against all laser guns
• VG-2 signal Detection Capabilities
• pulse signal Detection Capabilities
• digital compass display mode
• city mode to virtually eliminate false radar alerts
• user selectable brightness and mute on/off
• power on/off and volume control wheel
• BLUE BACKLIT DIGITAL Text Display
• tutorial mode to demonstrate operations
• memory to retain previously set operational modes after power-off
• corded power connection into 12-volt car lighter socket (Power cord
included)
Installing the Unit
Mounting guidelines
The STINGER radar/laser detector can be mounted on your windshield or
dashboard using the mounting bracket and hook-and-loop fastener provided.
• Mount on the windshield in a centered location that will not obstruct the
view of the driver and is within reach, so the buttons can be easily accessed.
• Do not mount behind windshield wipers, metal surfaces, ornaments, or
mirrored sunscreen glass, as these affect radar/laser signals. Tinted glass
does not affect radar/laser signal reception.
Conceal the STINGER radar/laser detector when you leave your vehicle to
prevent theft and to minimize the unit's exposure to extreme temperatures,
which can temporarily impair performance.
Windshield mounting
1. Install the suction cups and
bumper onto the windshield
mounting bracket by sliding them
into their holes (if not pre-installed).
2. Press the bracket base firmly
against the windshield until the
suction cups securely take hold.
3. Fasten the bracket at the top sides’ slots of the unit.
Stinger S650 5 Radar detector
Loading...