Page 1
Product Features
Blazing Fast Performance
• Allow storage devices to
operate at near-native speeds
with throughput of over
1.2 TB/hr
• Reduce backup windows with
multiple concurrent backups
Smooth Data Streaming
• Increase write performance
with Speedwrite
designed technology which
efficiently queues outstanding
write commands
• Increase availability with
Multipathing, the ability to
map the same storage to multiple iSCSI ports
One Click Installation
• Simplify configuration and
management of FibreBridges
with ExpressNAV
easy-to-use web-based GUI
• Reduce time spent on initial
set-up with features such as
automatic LUN mapping
• Quickly and easily integrate
additional bridges into SANs
with the ability to save and
restore bridge configurations
SAN Connectivity
• Interconnect Fibre Channel
and iSCSI SANs
• Single point of management
for storage behind the bridge
TM
, an ATTO-
TM
, ATTO’s
TM
iPBridge
2700C
iSCSI-to-Fibre Channel Bridge
Ideal for connecting Fibre Channel
Storage Networks to an IP SAN
As the amount of data generated by users in organizations continues to increase, managing traditional direct-attached methods of storing data becomes a more difficult and time-consuming task.
The ATTO iPBridge
growing issue by providing high-performance
iSCSI-to-Fibre Channel connectivity. Since iSCSI
technology utilizes existing Ethernet infrastructures
already supported natively by many servers, decoupling Direct Attached Storage (DAS) from individual servers and reaping the benefits of networked storage is a simple task. Servers can now
utilize an organization’s Fibre Channel SAN for purposes such as backup and resource consolidation.
All iPBridges offer additional value through ATTOdesigned technologies. Performance of the bridge
is optimized through the utilization of ATTO’s
SpeedWrite feature, which efficiently queues outstanding write commands to enhance the throughput of the bridge. Features such as e-mail
notification of errors and SNMP support serve to
reduce downtime and increase productivity. The
ever-increasing security concerns of today are addressed through support for both Virtual LANs
(VLANs) and Access Control Lists (ACLs.) Initial
installation and configuration is a painless task due
to the ExpressWizard configuration assistant,
which helps optimize the bridge for specific application needs by asking a series of basic questions.
Management of the bridge is simplified with ExpressNAV, ATTO’s web-based management GUI
which provides an easy interface to configure,
manage and diagnose ATTO iPBridges.
The iPBridge 2700 is the leading choice for highperformance iSCSI-to-Fibre Channel bridging available today, thanks to industry-leading support for 4Gigabit Fibre Channel. Support for both FC and
iSCSI protocols allows storage devices such as
disk drives, tape drives and libraries, and CD jukeboxes to easily attach to IP networks.
TM
2700C helps address this
• Four independent
Gigabit Ethernet ports to
• Near wire speed (99.5%)
• Auto negotiates to 2/1-
• Full support for direct
• Support for FC-AL,
• Features intelligent
• RoHS Com pl iant
• 2-year standard
product warranty
Technical Highlights
two independent 4Gigabit Fibre Channel
busses
sustained throughput—
120 MB/sec. per Gig-E
port
Gigabit Fibre Channel
connect to F-port fabric
switches
PLDA and public loop
login
Bridging Architecture
for optimized performance
TM
Technical Specification
iPBridge
TM
2700C
iSCSI Bridge
For More Information:
www.ATTOTech.com
or to Purchase:
www.ATTOStore.com
(716) 691-1999
Page 2
iPBridgeTM 2700C
Gigabit Ethernet and Fibre Channel
Gigabit Ethernet Interface
Fibre Channel Interface
Management
Operating Environment
Local and Network Management
LEDs
Agency Approvals
Safety and Environmental
Environmental & Physical Specifications
• Four independent 100/1000 Gig-E RJ45 Ethernet ports
• Supports Microsoft iSCSI initiator v2.05
• Supports IP v.4
• Compliance with IEEE802.3ab Gig-E
• Compliance with IEEE 802.3x flow Control
• SNMP MIB 2.2 support
• 4.250-Gigabit
• Auto-negotiates to 2.125/1.0625-gigabit devices
• Two Optical SFP (Small Form Factor Pluggable) Fibre Channel Ports
• Full support for direct connect for F-port fabric switches
• Class 3 Fibre Channel transfers
• PLDA, public loop login (NL-ports) and fabric connect (N-port)
• Full-duplex transmissions
• Operating system independent
• Supports all SCSI devices including hard disk drives, tape drives, RAID controller, DVD, MO and CD libraries
• Integrated web server for remote configuration, management and diagnostic capabilities
• Local diagnostics supported through CLI, SNMP, Telnet, FTP and SCSI Enclosure Services (SES)
• Command line and menu-based ASCII text management access via Ethernet
• Dedicated Ethernet Management Port
• MultiTarget Mode allows each fibre channel device to have its own Target (LUN) name
• Multiple levels of password protection
• Ethernet link and activity
• FC activity
• Fault
• Ready
• RoHS Compliant
Configuration
Dimensions
Operating Environment
Power
Weight
Ordering Information
Model Number
Technical Specification
iPBridgeTM 2700C
• Single (embedded) PCB
• Desktop enclosure with rack mount kit
• Embedded Board: 6.193” W x 6.373” L x .545” H
• Operating: 5-40° C
• Temperature: user configurable integrated thermal sensor data for automatic shutdown Default 70° Celsius
• Air Flow: Recommended 11 CFM Ambient Air not to exceed 40° Celsius
• Humidity: 10-90% non-condensing
• Embedded: [email protected]
• Desktop: [email protected]
• 8 lbs (Rack/Desk model)
• IPBR-2700-CR0
For More Information:
www.ATTOTech.com
or to Purchase:
Power Behind the Storage
www.ATTOStore.com
(716) 691-1999
©2008 ATTO Technology, Inc. Specifications subject to change without notice
Rev 2/08
Loading...