ATTO Technology FibreBridge 2350C Specification Sheet
ATTO FibreBridge™ 2350C
High-Performance Fibre Channel-to-SCSI Bridging
Architecture for tomorrow’s faster drives
The ATTO FibreBridge™ 2350C is an
embeddable Fibre Channel-to-SCSI
bridge featuring one (1) Fibre Channel
port with a 2-Gigabit SFP connector and
two (2) independent Ultra3 SCSI busses
and a standardized 4U cPCI form factor.
The ATTO FibreBridge 2350C is the ideal
bridging component to allow mid-range
native SCSI storage devices to be
incorporated into Fibre Channel networks.
It offers a winning combination of
performance, versatility and affordability
for current and next-generation
SCSI-based storage solutions.
TECHNICAL
HIGHLIGHTS
• 1 x 2 with one (1) 2.125-Gigabit
Fibre Channel port and two (2)
independent Ultra3 SCSI busses
• 400 MB/sec. maximum throughput
• Support for SNIA Extended Copy
The standardized physical design enables
manufacturers to centralize on a common
component design across multiple
product lines while maintaining
distinct interface technologies.
ATTO’s built-in intelligent Bridging
Architecture™ offers a unique combination
of features that gives manufacturers
the ability to embed customized value
into their products.
• ExpressNAV™ integrated management
console for component monitoring and
management
• RS-232, Ethernet and Fibre Channel
in-band configuration, monitoring and
management
• Full support for direct connect to
F-port fabric switches
• Standardized 4U cPCI form factor
Fibre Channel
attotech.com
155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999
attotech.com
ATTO FibreBridge™ 2350C
Fibre Channel and SCSI
Fibre Channel Interface:
• 2.125-Gigabit (400 MB/sec. in full-duplex mode)
• Backward compatible with 1.0625-Gigabit
devices
•One (1) SFP (Small Form Factor Pluggable) port
• Full support for direct connect to F-port
fabric switches
• Class 2, Class 3 and Intermix ANSI Fibre
Channel Specifications
• Fibre Channel support for FC-AL, PLDA and
public loop login
• Full-duplex data transmissions
SCSI Interface:
•Two (2) independent VHDCI
68-pin SCSI connectors
•LVD Ultra3 SCSI – 160 MB/sec. max
per channel
• Backward compatible with all Singleended SCSI devices
• 128 LUNs per channel
Performance:
• Over 7,000 I/Os per sec.
• Up to 209 MB/sec. sustained data-transfer rate
•Memory: 128 MB for advanced data
buffering and performance
• Support for 8 concurrent XCOPY processes
LEDs:
• FC Activity
• FC Link
• SCSI Activity Port 1, 2
• Ready
• Fault
Environmental and Physical
Characteristics
Dimensions:
• 6.193” W
• 6.299” L
Operating Environment:
•Temperature: 0 - 40º C
•Humidity: 10 - 90% non-condensing
Power:
• Input: 3.5A@5V
• Power provided: cPCI connector or
Custom 6-pin connector
Configuration:
• Single (embedded) PCB
Figure 1 - FibreBridge 2350C
Airflow:
• Recommended 250 LFM
• Ambient Air not to exceed 40ºC
Other
Operating Systems Supported:
• Operating system independent
Fibre Channel Compliance:
• Single bit error detection and correction (ECC)
•Multi-bit error detection
• ANSI FC-AL
• SNIA Extended Copy
• Class 2, Class 3 and Intermix
• FCP-1 and FCP-2 Fibre Channel Specifications
Management
Device Management Physical Interface:
• In-band (through Fibre Channel)
• Serial through RJ-11 serial port
• Network through 10/100 BaseT Ethernet
Port (Telnet, FTP and SNMP)
Device Management User Interface:
• Command Line Interface (CLI)
• ASCII-based menu system
•Performance reporting and Error Logging
(CLI commands)
•ATTO ExpressNAV™ integrated management
console
Fault LED
Ready LED
RJ-11 Serial
Connector
RJ-45 Ethernet
Connector
SCSI Port 0 &
Port 1
Activity LED
SCSI ports
0 & 1
FC Activity &
Link
LED
SFP Fibre
Channel
Connector
FC ASIC
SCSI ASIC
Event-log Battery
Backup
On-board
Processor
Power LED
Optional
Power
Connector
cPCI
Power
Connector
Fibre Channel
©2005 ATTO Technology, Inc. Specifications subject to change without notice. Rev. 7/05
Loading...