ATTO Technology FibreBridge 2300R, FibreBridge 2300D Specifications
ATTO FibreBridge™ 2300R/D
Next-generation Fibre Channel-to-SCSI Bridge
for Mid-range Environments
ATTO FibreBridge™ 2300R/D is a Fibre
Channel-to-SCSI bridge featuring one (1)
Fibre Channel port with a 2-Gigabit
SFP connector and two (2) Ultra160
SCSI ports. For mid-range-capacity tape
drive OEMs who require 2-Gigabit
Fibre Channel performance, the
2300R/D provides a fl exible external
solution for a wide range of applications.
Unlike the other bridges and routers, the
2300R/D, combined with the 2300E,
provides a single-source combination
for 2-Gigabit products that can be used
as an internal or external solution.
ATTO’s built-in intelligent Bridging
Architecture™ offers a unique combination
of features that gives manufacturers
the ability to embed customized value
into their products.
TECHNICAL
HIGHLIGHTS
• One 2-Gigabit Fibre Channel port by two
(2) independent Ultra160 SCSI busses
• 400 MB/sec. maximum throughput
• Support for SNIA Extended Copy
• RS-232, Ethernet and Fibre Channel
in-band confi guration, monitoring
and management
• Full support for direct connect to
F-port fabric switches
Fibre Channel
attotech.com
155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999
attotech.com
ATTO FibreBridge™ 2300R/D
Fibre Channel Activity
Fibre Channel and SCSI
Fibre Channel Interface:
• 2-Gigabit (400 MB/sec. in full-duplex mode)
• Backward compatible with 1-Gigabit
devices
• One (1) SFP (Small Form Factor Pluggable) port
• Full support for direct connect for F-port
fabric switches
• Class 2, Class 3 and Intermix ANSI Fibre
Channel Specifi cations
• PLDA, public loop login (NL_ports) and
fabric connect (N_port)
• Full-duplex transmissions
SCSI Interface:
• Two (2) independent 68-pin
SCSI connectors
• LVD Ultra160 SCSI – 160 MB/sec. max
per channel
• Backward compatible with all Single-
ended SCSI devices
• 128 LUNs per channel
Performance:
• Up to 6,800 I/Os per sec.
• Up to 209 MB/sec. sustained data-
transfer rate
• Memory: 128 MB of SDRAM for advanced
data buffering and performance
• Supports Tagged Command Queuing
• Support for 2 concurrent XCOPY commands
Fibre Channel Compliance:
• ANSI FC-AL
• SNIA Extended Copy
• Class 2, Class 3 and Intermix
• FCP-1 and FCP-2 Fibre Channel Specifi cations
Management
Device Management Physical Interface:
• In-band (through Fibre Channel)
• Serial through RS-232 Port
• Network through 10/100 BaseT Ethernet
Port (Telnet, FTP and SNMP)
Device Management User Interface:
• Command Line Interface (CLI)
• ASCII-based menu system
• ATTO ExpressNAV™ web-based integrated
management console
• Performance reporting and Error Logging
Figure 1 - Rear panel view
SCSI Port 1 SCSI Port 2
(CLI commands)
LEDs:
• Power
• FC Activity
• 2-Gigabit Operation
• SCSI Activity Port 1, 2
• Ready
SCSI Port 1 & 2
Activity
2-Gigabit Operation LED
SFP FC
Connector
Environmental and Physical
Characteristics
Dimensions:
• 16.91” W
• 10.00” L
• 1.72” (1U) H
Operating Environment:
• Temperature: 5 - 40º C
• Humidity: 10 - 90% non-condensing
• User confi gurable integrated thermal
sensor data for auto shutdown
• Default: 70º C (max)
Power:
• Input: 85–250 VAC
50-60 Hz
Max 2.0A @ 110 VAC
• Rated 90–132 VAC: 175–264 VAC, 47-63Hz,
single phase
Backup Method
Serverless
Standard
Provides 95%
CPU Availability
Provides 45%
CPU Availability
2
3
Power LED
Ready LED
RS-232 Port Air Vent
Ethernet Port
Confi guration:
• Desktop (with attached feet)
• 19” Rack mount kit included
Airfl ow:
• Internal fans provide 11 CFM internal
air fl ow
• Ambient Air not to exceed 40º C
• Front to back
Other
Operating Systems Supported:
• Operating system independent
Agency Certifi cations:
• FCC Class A
• CE (EN55022/EN55024)
• CSA / EN60950
Figure 2 - Serverless Backup
1
4
4
5
1
2
3
Power Switch
Power Receptacle
Fibre Channel
©2005 ATTO Technology, Inc. Specifi cations subject to change without notice. Rev 9/05
Loading...