ATTO Technology FibreBridge 1180D Specification Sheet
ATTO FibreBridge™ 1180D
Easily Integrated Fibre Channel-to-SCSI Bridge
The ATTO FibreBridge™ 1180D is a
desktop Fibre Channel-to-SCSI bridge
featuring one (1) Fibre Channel port
with a 1-Gigabit DB9 copper connector and one (1) Ultra2 SCSI port. It
provides a cost-effective connectivity
solution that can be easily integrated with
SCSI devices for direct connection into a
Fibre Channel Storage Area Network (SAN).
ATTO’s intelligent Bridging Architecture™
offers a unique combination of features
that gives manufacturers the ability
to embed customized value into their
products.
TECHNICAL
HIGHLIGHTS
• One 1-Gigabit Fibre Channel
port by one independent Ultra2
SCSI bus
• 80 MB/sec. maximum throughput
• Support for SNIA Extended Copy
• RS-232 and Fibre Channel In-band
confi guration, monitoring and
management
Fibre Channel
attotech.com
• Full support for direct connect to
F-port fabric switches
• Stackable desktop enclosure
155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999
ATTO FibreBridge™ 1180D
Fibre Channel and SCSI
Fibre Channel Interface:
• 1-Gigabit (200 MB/sec. in full-duplex mode)
• One (1) copper DB9 port
• Full support for direct connect to
F-port fabric switches
• Class 2, Class 3 ANSI Fibre Channel
specifi cations
• PLDA, public loop login (NL_ports) and
fabric direct connect (N_port)
• Full-duplex transmissions
SCSI Interface:
• One (1) 68-pin SCSI connector
• LVD Ultra2 SCSI - 80 MB/sec. max.
• Backward compatible with all Single-
Ended SCSI devices
• 128 LUNs per channel
Performance:
• Up to 3,500 I/Os per sec.
• 80 MB/sec. maximum data-transfer rate
• Up to 72 MB/sec. sustained
data-transfer rate
Fibre Channel Compliance:
• ANSI FC-AL
• SNIA Extended Copy
• Class 2, Class 3
Environmental and Physical
Characteristics
Dimensions:
• 7.50” W
• 10.00” L
• 2.03” H
Operating Environment:
• Temperature: 0 - 40º C
• Humidity: 0-90% non-condensing
Power:
• Input: 100/240 VAC (automatic)
• Rated: 90 – 132 VAC; 175 – 264 VAC,
47 – 63 Hz, single phase
Fibre Channel Port
Confi guration:
• Desktop
Airfl ow:
• Internal fan provides 10 CFM
• Ambient air not to exceed 40º C
Other
Operating Systems Supported:
• Operating system independent
Agency Certifi cations:
• FCC Class A
• CE (EN55022/EN55024)
• CSA / EN60950
Figure 1: Rear Panel
SCSI Activity
LED
RS-232
(Serial) Port
Management
Device Management Physical Interface:
• In-band (through Fibre Channel)
• Serial through RS-232 port
Device Management User Interface:
• Command Line Interface (CLI)
• ATTO BridgeTools™ Java-based application
LEDs:
• Power
• Ready
• FC activity
• SCSI bus activity
SCSI Port
Power
LED
FC Activity
LED
Power
Switch
Power
Connector
Fibre Channel
©2005 ATTO Technology, Inc. Specifi cations subject to change without notice. Rev 9/05
Loading...