ATTO Technology 2600 User Manual
ATTO ExpressPCI FC 2600
1.0625-Gigabit Fibre Channel Host Adapter
With a Fixed Copper HSSDC Interface
The ATTO ExpressPCI FC 2600 is
designed for high performance with
very low latency for the most demanding
Storage Area Network (SAN) environments. Using proven technologies and
protocols, the FC 2600 supports all
Fibre Channel topologies and provides
an economical copper connection to
Fibre Channel devices.
TECHNICAL
HIGHLIGHTS
• 1.0625-Gigabit Fibre Channel
host adapter
• 200 MB/sec. throughput in
full-duplex mode
• Fixed copper HSSDC connector
• Support for SNIA HBA API
• 64-bit/66 MHz PCI interface
• Optimized Fibre Channel and
SCSI-3 algorithms
•Advanced data interleave architecture
Fibre Channel
attotech.com
155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999
• Full multiple block buffering
ATTO ExpressPCI FC 2600
Hardware Specifications
Fibre Channel Interface:
• 1.0625-Gigabit data-transfer rates
• 200 MB/sec. throughput in full duplex mode
• Fixed copper HSSDC Fibre Channel connector
• Supports all Fibre Channel topologies
• Point-to-Point
• Arbitrated Loop
• Direct Fabric/Switch Attach
• Strict adherence to ANSI FC-AL-2, FC-PLDA,
FC-Tape, and FC-FLA specifications
• Supports Class 2, Class 3 and Intermix
transfers
• Flash ROM for easy field upgrades
Advanced FC Features:
• Support for SNIA HBA API
• LUN Masking
• Supports Target and Initiator Modes
Advanced SCSI-FCP Support:
• Large command FIFO
• Asynchronous I/O support
• ASPI and SCSI Manager 4.3 compatible
• SCSI-3 tagged command queuing
• Bootable from attached disks
• Support for multiple block sizes
Environmental and Physical
Characteristics
Dimensions:
• Full form factor: 4.200" x 6.521"
Operating Environment:
• Temperature: 0-50º C
•Humidity: 10-90% non-condensing
• Airflow: 100 LFM (min.)
Power:
• 1 Amp @ 5 Volts
PCI Signal Compatibility:
• 3.3 Volts/5 Volts universal
Fibre Channel Host Adapter
Selection Chart
Single & Multi-Channel 2-Gigabit Adapters
Configuration:
• Easy to install connection plate with LED
to monitor on-line status
LED indicates
online status
Copper HSSDC
connector
Accelerated PCI Bus Management:
• PCI bus master rate of 528 MB/sec.
• PCI 2.2 compliant
• 64-bit/66 MHz PCI (backward compatible
with 32-bit and 33 MHz PCI)
Software Specifications
Driver Support:
• Windows® 2000
• Windows XP
• Windows Server 2003
• Linux
• Solaris (x86 and SPARC)
• Mac® OS X
• Mac OS 9
Advanced Data Streaming (ADS™):
• Improved PCI system bandwidth use
• Optimized FC and SCSI-3 algorithms
• Tagged command queuing
• RISC processor for high performance
RAID kits available
PRODUCT FEATURES
Number of FC Channels 42211
Maximum Transfer Rate (MB/sec.) 400* 400* 400* 400 400
32-bit PCI Compatible ••••
64-bit PCI Compatible •••••
Fabric & Loop Support •••••
Cable Distances (max.) 500M 500m 500m 500m 10m
33 MHz PCI Compatible ••••
66 MHz PCI Compatible •••••
133 MHz PCI-X • •
Optical/Copper Interface
Class 2,3 2,3 2,3 2,3 2,3
Full-duplex •••••
RAID Support •••••
Windows® 2000/XP/Server 2003 •••••
Solaris, Linux Linux Linux • •
Mac® OS and Mac OS X Support OS X OS X OS X • •
FC 3342 FC 3322 FC 3321 FC 3300
SW LC SFP SW LC SFP SW LC SFF Fixed SW LC HSSDC
* per channel
FC 3305
Fibre Channel
©2003 ATTO Technology, Inc. Specifications subject to change without notice. PRMA-0264-000
Loading...