ATTO Technology 1500E User Manual
ATTO iPBridge™ 1500E
iSCSI-to-SCSI Bridge for Cost-effective IPSAN Connectivity
Take advantage of today’s revolution
in storage connectivity. Embed a valueadd platform in your products for easy
connectivity to an Ethernet network.
TECHNICAL
HIGHLIGHTS
ATTO’s iPBridge™ 1500E supports
GigE and SCSI devices in an IP SAN
topology. Uniquely designed to support
the IP SAN needs of today’s Small and
Medium Businesses and Enterprises
(SMB / SME), the iPBridge optimizes
connectivity and management by
utilizing ATTO’s proven intelligent
Bridging Architecture™.
The ATTO iPBridge™ 1500E is designed
for easy integration, and offers broad
market acceptance through leading
ISV certifications and support for
leading iSCSI protocols, allowing for
storage devices such as hard drives,
tape drives and libraries, and CD
jukeboxes to easily attach to IP networks.
• One independent Gigabit Ethernet port to
one independent Ultra160 SCSI port
• Compatible with all leading iSCSI initiators
• Gigabit Ethernet connectivity auto negotiates
to 10/100 Ethernet
• Designed to the IETF Industry Standard
iSCSI Protocol v1.0
• 30 MB/sec. throughput
•Features intelligent Bridging Architecture for
optimized performance
• ExpressNAV™ integrated management console
for remote configuration, management and
diagnostic capabilities
• Supports all SCSI devices including hard disk
drives, tape drives, RAID controllers, DVD,
MO & CD libraries
IP Storage
attotech.com
155 CrossPoint Parkway • Amherst, NY 14068 • 716 • 691 • 1999
ATTO iPBridge™ 1500E
Gigabit Ethernet and SCSI
GbE Interface:
• 10/100/1000 GbE RJ45 Ethernet port
• Supports IP v.4
• Supports iSCSI Protocol 1.0
• Compliance with IEEE 802.3ab GbE
• Compliance with IEEE 802.3x Flow Control
• SNMP MIB 2 support
• Supports Jumbo Ethernet frame
SCSI Interface:
• Single 68-pin SCSI connector
• Ultra160 LVD SCSI – 160 MB/sec.
maximum throughput
• Backward compatible with all single-ended
SCSI devices
• Supports SCSI-3 specifications
Management
Operating Environment:
• Operating system independent
• Supports all SCSI devices including hard
disk drives, tape drives, RAID controllers,
DVD, MO and CD libraries
•Multiple interface orientations available Ethernet and RS232 ports can be located
on either the long edge or short edge of
the board (see Figure 2 and 3)
Environmental and Physical
Characteristics
Configurations:
• Embedded Board
Dimensions:
• Embedded Board:
4.4” W X 6.4” L
Operating Environment:
• Operating Temperature: 5-40º Celsius
Power: Standard 4pin power connector, 12V, 1.5A
Nominal power consumption: 1A @ 12V
Weight: 1.5 lbs
Figure 1 – iPBridge 1500E Board Detail
Local and Network Management:
• ExpressNAV™ integrated management
console for remote configuration,
management and diagnostic capabilities
• Command line management access via
Ethernet and RS232
• Local diagnostics supported through
SNMP, Telnet, and FTP
•Includes support for DHCP, ICMP, and RMON
• Built in memory has ECC detection and
correction
•User accessible reset switch
• Built in watchdog timer
•Automatically detects and maps all
connected devices at power on
Figure 2 – iPBridge 1500E Standard
Embedded Configuration
Figure 3 – iPBridge 1500E Optional
Desktop Configuration
Rev 1, 9/04
IP Storage
Loading...