Attenti TRX900F2 Users manual

Installation Manual for bracelet

TRX900F-2

Installation Manual for bracelet unit TRX900F-2

Bracelet

To Attach the Bracelet

Match the Bracelet serial number on the Bracelet case to the number on the Bracelet serial
number in the hardware list in PCE. The ankle transmitter and strap will be shipped
unattached. You must insert one end of the strap into the transmitter and push the locking
pins into place. Make sure that the locking pins are flush with the case. Measure the strap to
the offender’s leg and cut the strap to fit around the offender’s ankle. You should size the
strap so that it allows approximately ¼ inch of space between the offender’s leg and the strap
to ensure comfort.

Once you have the strap attached, push the locking pin through the holes on the bracelet and
into the strap until it locks into place

2