Attenti PC 830 Users manual

Pull Cord

USER MANUAL

FCC ID : QUX-PC-830

10 – May - 2007

HomeFree Systems Ltd PC-830 (Pull Cord) User Manual

Table of Contents

1. Foreword...................................................................................2

1.1. Pull Cord Device - State machine Drawing:..............................3

1.2. Activating the Pull Cord:...........................................................4

1.3. Activating a Panic Alert:............................................................4

1.4. Deactivating a Panic Alert:........................................................4

1.5. Deactivating the Pull Cord:........................................................5

1.6. Cleaning Instructions.................................................................5

2. FCC Notices..............................................................................6

1

HomeFree Systems Ltd PC-830 (Pull Cord) User Manual

1. Foreword

The HomeFree at Care Centers system was designed to monitor
special needs and Dementia individuals in the care center
environment. The Pull Cord is one of the many unique elements of
this system.

The Pull Cord is a small wall-mounted device, to be installed at
bedside and in the bathroom of nursing homes and assisted leaving
homes. Once pulled, the Pull Cord Device shall transmit panic
messages once every 18-22 seconds (random interval within this
range), until it is reset by a nurse. It will be possible to turn the Pull
Cord on and off (for saving battery life and for aviation safety while
shipped). While the Pull Cord is ON, it shall transmit a status
message, once every hour, to indicate that it is still functioning and to
report its battery level.

LED Indicator

Pull Cord
Button

2