Attenti PB 830 User Manual

Part Number - 350109601 Revision – A00-000
Wireless Resident Monitoring Solutions
Emergency Call Button Operational Instructions
The HomeFree system was designed to monitor special needs and Dementia individuals in the care center environment. The Emergency Call Button is one of the many unique elements of this system.
The Emergency Call Button is a small, lightweight push button unit worn by the resident / nurse that alerts care center staff members whenever the resident / nurse activates an emergency call alert. The Emergency Call Button can be worn as a pendent, watch style or clip-on. The Emergency
Call Button is not for use outside the monitored area.
Panic Button
LED Indicator
Activating the Emergency Call Button:
The Emergency Call Button is turned off by the manufacturer before shipment and must be activated before use. To activate, hold the Emergency Call Button firmly in your hand and press the panic button continuously for 2 seconds. The LED indicator flashes indicating that the Emergency Call Button is in active mode.
Part Number - 350109601 Revision – A00-000
Once in active mode, the Emergency Call Button sends a status message to the monitoring station (every 60 minutes) indicating the current battery status as well as the location of the Emergency Call Button. This status message is sent until the Emergency Call Button is deactivated.
Activating a Panic Alert
Press the panic button. The LED indicator flashes indicating that the Emergency Call Button is in panic alert mode.
Once in panic alert mode, the Emergency Call Button sends a panic alert message (every 20 seconds) to the monitoring station. This message is sent until the panic alert is deactivated.
Deactivating a Panic Alert
Press the panic button 6 times in quick succession (within 5 seconds). The LED indicator lights up for 3 seconds indicating that the panic alert has been deactivated.
Even though the panic alert has been deactivated, the Emergency Call Button is still in active mode. Therefore, the Emergency Call Button still sends a status message to the monitoring station. This status message is sent until the Emergency Call Button is deactivated.
Deactivating the Emergency Call Button
Holding the Emergency Call Button firmly in your hand, press the panic button continuously for 10 seconds. The LED indicator lights up for 3 seconds. During this 3-second period, press the panic button 2 times in succession. The Emergency Call Button is now in deactivated mode (turned off).
Loading...
+ 1 hidden pages