Attenti MRD RF 700 2 User Manual

Al

arm Reset / Bypass

Belt Attachment

Wireless Resident Monitoring
Solutions

Manual Reset Device (MRD-RF)
Operational Instructions

The HomeFree system was designed to monitor special needs and Dementia
individuals in the care center environment. The Manual Reset Device
(MRD-RF) is one of the many unique elements of this system.

The Wireless Reset Device is a small, lightweight push button unit, carried
by the care center staff member, that can be used to temporary deactivate the
Wireless Monitoring Door Unit alarm (for door alarm bypass) as well as
reset unauthorized exit attempt alerts.

use outside the monitored area.

The Manual Reset Device is not for

LED Indicator

Clip

Button

Deactivating the Wireless Monitoring Door Unit
Alert:

Once the Wireless Monitoring Door Unit alert has been activated, move to
the appropriate door / exit that activated the alarm. Escort the resident out of
the range of the Wireless Monitoring Door Unit. Standing relatively close to
the Wireless Monitoring Door Unit, hold the Manual Reset Device and press
the Reset button. The audible alarm is deactivated and Wireless Monitoring
Door Unit is reset.

Bypassing the Wireless Monitoring Door Alarm:

Once you are ready to escort the resident through the monitored door / exit,
ensure that the resident is out of the range of the Wireless Monitoring Door
Unit. Stand relatively close to the Wireless Monitoring Door Unit and
holding the Manual Reset Device, press the Reset button. You can now
escort the resident through the monitored door / exit. (Bypass interval time is
approximately 20 seconds).