Page 1
LPU-800
User Manual
Version 1.0
30/05/2003
Page 2
ElmoTech Ltd Version 1.0
Prepared by:
Elmo-Tech Ltd.
Corporate Headquarters
2 Rehov HaBarzel
P.O. Box 13236
Ramat HaChayal
61132 Tel Aviv
Israel
Tel: +972-3 – 6478871
Fax: +972-3 – 6478872
Visit us at: www.elmotech.com
© 2001, Elmo Tech Ltd. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording or
otherwise, for purpose other than the user’s manual, without prior permission of Elmo Tech
Ltd.
NO WARRANTY
The technical documentation is being delivered AS-IS, and ElmoTech Ltd. makes no
warranty as to its accuracy or use. Any use of the technical documentation or the
information contained therein is at risk of the user. Documentation may include technical or
other inaccuracies or typographical errors. ElmoTech Ltd. Reserves the right to make
change without prior notice
Page 2 of 13
Page 3
ElmoTech Ltd Version 1.0
TABLE OF CONTENTS
1. General notes:........................................................................................................ 4
2. Screen layouts........................................................................................................ 5
1. Init 0..................................................................................................................................... 5
2. Init 1..................................................................................................................................... 5
3. Init 2..................................................................................................................................... 5
4. Normal................................................................................................................................. 6
5. Message ............................................................................................................................... 6
6. Message read ....................................................................................................................... 7
7. Message option.................................................................................................................... 7
8. Track mode.......................................................................................................................... 8
9. Menu.................................................................................................................................... 8
10. Beep Volume ................................................................................................................... 9
11. Ring Options.................................................................................................................... 9
12. Self Test......................................................................................................................... 10
3. States Diagram..................................................................................................... 11
4. FCC Notices ........................................................................................................ 12
LPU Unit Customer Information............................................................................................. 12
Transmitter FCC Notices ......................................................................................................... 13
Page 3 of 13
Page 4
ElmoTech Ltd Version 1.0
1. General notes:
1. If a message is received and the user ignores it, the “mail box” icon will be
displayed on the LCD and LPU (If not in vibrate mode) will beep shortly every 30
seconds (3*(on=100msec, off =300msec)).
2. The LPU should check AMS sanity and if not received activate alarm.
3. The sanity message sent from the AMS will include system time and next sanity
time.
4. Any key pressed on the LPU will stop the alarm.
5. The LPU will support “find lost LPU” command from the AMS (It will beep, even if in
vibrate mode, upon reception of this message).
6. When going back to “normal display” and messages are pending the LPU will
display a message prompt as described in screen 5.
7. Each incoming message will get its own serial number so that the last received
message will get the first number and the serial numbers of the previous
th
messages will be shifted to the left, i.e. 1->2, 2->3…9->10 & 10
be automatically deleted).
8. Each keystroke will generate the short buzz (200msec).
(last) message will
Page 4 of 13
Page 5
ElmoTech Ltd Version 1.0
JJJJJJJJJJJJJJJJJJJ
JUJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ
J
2. Screen layouts
1. Init 0
D
Event Description
Time For 1 second beep & back-light on.
Event Description
Time For 1 second and vibrate & back-light off.
MC
2. Init 1
U
D
MC
3. Init 2
U
Home F r ee L t d .
D
MC
U
Elmo Tech Ltd.
D
Event Description
Time For 2 seconds back-light on.
MC
Or
Page 5 of 13
Page 6
ElmoTech Ltd Version 1.0
4. Normal
0 2/11/02 21 : 12:34 U
Me n u D
Event Description
M Open menu (9).
C
U Show first message in the buffer if available. *1
D Show last message in the buffer if available. *1
Low Bat
Message Switch to message menu.
Beep every 30 sec + icon blink. LPU counter of 5 minutes. If counter elapsed shutdown the LPU.
MC
5. Message
0 2/11/02 21 : 13:39 U
02
Me s s ages rece i ved
R e a d E x i t D
Event Description
M Go to Read display & Mute the receiving alarm.
C Back to previous display & Mute the receiving alarm & turn on the reminder. (4)
U
D
Low Bat
Message
Mute the receiving alarm & turn on the reminder.
Beep every 30 sec + icon blink. LPU counter of 5 minutes. If counter elapsed the LPU will be
shutdown.
MC
Notes:
*1 If the pager’s memory doesn’t contain any massages then LPU will display: “No Messages”.
Page 6 of 13
Page 7
ElmoTech Ltd Version 1.0
g
g
▼
y
▲
6. Message read
R o n a l d V o l k . I s m i s U
s i n
n i n
O p t i o n 0 3 E x I t D
Event Description *1
M Show message option menu (7).
C Back to normal display (4).
U If at the beginning of the message scroll back to the previous message else scroll up 2
lines.
D If at the end of the message scroll to the next message else scroll down 2 lines.
Low Bat
Message Display the envelope icon.
Beep every 30 sec + icon blink. LPUt counter of 5 minutes. If counter elapsed shutdown the LPU.
MC
i mm e d i a t e l l
O p t i o n 0 3 E x i t D
MC
last Zone is:Di
room. Fi nd him
.U
7. Message option
R o N a l d Vo l k . I s m i s U
>T r ack i ng<
De l e t e
S
elect Back D
MC
Event Description
M Select the option. *2
C Back to message read display (6).
U
D
Low Bat
Message Show the envelope and alarm.
*2 When current message will be deleted, the LPU will return to the Previous screen.
Scroll between the menu options. The option selected will be highlighted.
Beep every 30 sec + icon blink. LPUt counter of 5 minutes. If counter elapsed shutdown the LPU.
Notes:
*1 If the user doesn’t read all new messages then mail icon will appear on the LCD & the pager will
remind every 30-second.
Page 7 of 13
Page 8
ElmoTech Ltd Version 1.0
ZZZZZZZ
▼
/05/
8. Track mode
T rack Zalman Sirano. U
TX - 03 459
R a nge : >>>>>>>
M
ute B
Event Description
M Change the button to “UnMute” and stop beeping. If the alarm mode is vibrate only the
default text will be “UnMute”.
C Back to message option (7).
U
D
Low Bat
Message Tracked TX - beep (The length and frequency is a function of the range).
Note in Use.
Beep every 30 sec + icon blink. LPUt counter of 5 minutes. If counter elapsed shutdown the LPU.
MC
ack D
9. Menu
3 0/05/02 11 : 42:55 U
>B
R
S e l e c t E x i t D
MC
3 0
>Se l f Te
S e l e c t E x i t D
MC
Event Description
M Select the emphasis sub menu (10 or 11 or 12).
C Back to normal display (4).
U
D
Low Bat
Message Go to menu message display.
Cyclic scroll through the menu options. Each selected menu item will be highlighted.
Beep every 30 sec + icon blink. LPUt counter of 5 minutes. If counter elapsed shutdown the LPU.
eepVo l ume<
ingOption
02 11 : 42:55 U
▲
st<
Page 8 of 13
Page 9
ElmoTech Ltd Version 1.0
▼
/05/
▲
10. Beep Volume
3 0/05/02 11 : 42 :55 U
>H igh beepv Low beepvo l ume
S e l e c t B a
MC
Event Description
M Select the options and back to the previous display (9).
C Back to menu (9).
U
D
Low Bat
Message Update the number of messages pending.
Cyclic scroll through the beep volume.
Beep every 30 sec + icon blink. LPUt counter of 30 minutes. If counter elapsed shutdown the
LPU.
olume<
ck D
11. Ring Options
3 0/05/02 11 : 42 :55 U
>R ing<
V
S e l e c t B a
Event Description
M Select the options and back to the previous display (9).
C Back to menu (9).
U
D
Low Bat
Message Update the number of messages pending.
Cyclic scroll through the beep volume.
Beep every 30 sec + icon blink. LPUt counter of 30 minutes. If counter elapsed shutdown the
LPU.
MC
3 0
>R i ng&V
S e l e c t B a
MC
ibrate
ck D
02 11 : 42 :55 U
ibrate<
ck D
Page 9 of 13
Page 10
ElmoTech Ltd Version 1.0
JJJJJJJJJJJJJJJJJJJ
JUJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ
J
y
y.y
y
12. Self Test
D
MC
U
D
MC
HighBeepVo l ume U
Low BeepVo l ume
Vibrate
Bac k L ight D
MC
LPU HWVER x x . x x U
SWVER
D
MC
Event Description
M
C
U
D
Low Bat
Message Update the number of messages pending.
Notes:
After “self- test” completion the LPU will return to normal screen (4).
Beep every 30 sec + icon blink. LPUt counter of 30 minutes. If counter elapsed shutdown the
LPU.
Self-test (LCD backlight, buzzer high, buzzer low, Vibrator & display the SW & HW VER).
Page 10 of 13
Page 11
ElmoTech Ltd Version 1.0
3. States Diagram
LPU MMI
On/Off
Swit ch
Auto
Start -up
Screens
Auto
Nor mal
Screen
Men u
Exi t
Up/ Down
Exi t
Sel ect
Menu
Scre en
Sel ect
Automatically
back after sel f test
Message
Read
Scree n
Back or Select
Back or Select
Sel ect
Up/Down
Back or Select
Del ete
Opt i ons
Up/Down
Back
*
Beep
Vol ume
Screen
Rin g
Options
Screen
Self -te st
Screens
Opt io n
Scre en
Up/Down
Up/Down
Mute/UnMute
Track
Up/Down
Back
Tracki ng
Screen
Rec. Event
Read
Mes sa ge
Scre en
Exi t
Up/Down buttons allow the f ollowing oper ations:
*
1. Overview the message cont ent.
2. Overlook the message headers.
Page 11 of 13
Page 12
ElmoTech Ltd Version 1.0
4. FCC Notices
The LPU Unit Model 800 has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy and, if installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the equipment.
LPU Unit Customer Information
The LPU Unit complies with FCC part 68 Rules. On the bottom panel of this equipment is a label that
contains, among other information, the FCC Number and Ringer Equivalence Number (REN is 1.0 B).
If the LPU Unit is not operating properly it may cause harm to the telephone network and the telephone
company will notify you in advance that temporary discontinuance of service may be required. If advance
notice is not practical, you will be notified as soon as possible. Also, you will be advised of your right to
file a compliant with the FCC.
The Telephone Company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the Telephone Company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
The LPU Unit installation is described in the installation chapter. Connection to Telephone Company
provided coin service is prohibited. Connection to party lines service is subject to state tariffs.
Page 12 of 13
Page 13
ElmoTech Ltd Version 1.0
Transmitter FCC Notices
The TXMTR Model 500 complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This device has been tested and found to comply with the limits of the Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses and can radiate radio frequency energy
and, if installed and used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the equipment.
Page 13 of 13
Loading...