Attenti IDEU-810-4 Users Manual

1 Introduction

The new improved Wireless Monitoring Unit (iDEU-810-4) is a versatile
combination of both transmitter and receiver that is designed to extend the
transmission / reception range of HomeFree at Care Centers systems.

The Wireless Monitoring Unit (iDEU-810-4) is one of many specifically
positioned mini control units that are placed at various locations throughout
the facility and are capable of receiving transmission signals from multiple
sources and then transferring these signals to the next Wireless Monitoring
Unit (iDEU-810-4) in the network or directly to the Wireless Monitoring
Base Unit.

The Wireless Monitoring Unit (iDEU-810-4) transmits on an American FCC
tested and approved frequency; whereas the European version (iDEU-810-4)
transmits on a European tested and approved frequency. From a user
interface and functional point of view, the two models are identical,
therefore this installation and operational guide serves both versions.

iDEU-810 Installation and Operational Guide

1-1

1.1 Parts of the Wireless Monitoring Unit (iDEU-810-4)

LED Panel

Mounting
Bracket

Figure 1-1 Wireless Monitoring Unit (iDEU-810-4)

1-2

iDEU-810 Installation and Operational Guide

1.1.1 LED Panel

The faceplate of the Wireless Monitoring Unit (iDEU-810-4) comprises of 4
LEDs (Light emitting diodes).

The purpose of each LED is explained in the following table:

LED Description and Purpose

Reception
Transmission
Charge

Power

Blinks when receiving transmission signals

Blinks when transmitting signals

Steady light indicates internal battery is fully
charged. Charge LED blinks when internal
battery is not fully charged

Steady light indicates external power OK.
Power LED blinks when external power is
disconnected

iDEU-810 Installation and Operational Guide

1-3