ATP Electronics SATELLITE HARVARD ELITE AT2001 User Manual

SATELLITE HARVARD ELITE

User’s Manual

A.T. Products, Inc.

Designers and Manufacturers of Audio Teleconferencing Equipment

Model AT2001

Please keep instructions with equipment

1600 S. Division St., P.O. Box 625, Harvard, IL 60033 USA

800-848-2205 • Tel: [phone] • Fax: [phone]

Email [e-mail] • http://www.ATProducts.com

OPERATING CONTROLS

1. MICROPHONE INPUT JACK
Microphone plugs into this jack. (1/4” phone jack, 3-

conductor, stereo, 250 ohm/unbalanced)

2. TV MONITOR OUTPUT JACK
“Line-level” output for connecting to monitor or
auxiliary speaker system. (RCA style phono jack)

3. PUBLIC ADDRESS ADJUSTMENT
Receded control adjusts the microphone level heard out
the internal speaker. This adjustment also affects mic
level at TV Monitor jack and External Speaker jack.
(Clockwise turn increases level.)

4. TELEPHONE JACK
For analog (single-line) telephone connection; telephone
plugs into this jack for private conversations and/or if
system does not have a dial pad. (RJ11 style jack)

5. TELEPHONE LINE JACK
For analog (single-line) telephone connection; telephone
cord from the wall jack connects here. (RJ11 style jack)

6. HOPS SWITCH
Adjustment for the amount of delay needed to eliminate
echo/feedback:

N POSITION
Use with Cable, Microwave, ITFS, etc.
(Types of transmissions not requiring delay)
1 POSITION
Use for 1 hop Satellite transmission.
2 POSITION
Use for 2 hop Satellite transmission.

7. POWER SUPPLY JACK
Power transformer plugs into this jack and into a working
120 VAC electrical outlet.

8. RECORD OUTPUT JACK
Low level output for connecting to a tape recorder or a
sound system for reinforcement. (6Kohms/unbalanced, ­33dBm, RCA style phono jack)

9. EXTERNAL SPEAKER OUTPUT JACK
Output for connecting to auxiliary speaker system.
Levels are adjustable by the Slide Volume control
(receive) and Public Address Adjustment (transmit).
(RCA style phono jack)

10. TELEPHONE BASE JACK
For digital (multi-line) telephone connection; telephone
base plugs into this jack. (RJ13C style jack)

11. HANDSET JACK
For digital (multi-line) telephone connection; handset
plugs into this jack. (RJ13C style jack)

12. PUSHWHEEL SWITCH
Adjustment for digital (multi-line) telephone connection;
setting affects microphone transmit level going out phone
line. (Level increases as number increases; too high of a
setting may result in voice distortion.)

13. SATELLITE AUDIO INPUT JACK
Input for connecting to the Audio-Out of VCR, satellite
receiver (IRD) or TV monitor. (RCA style phono jack)

14. SATELLITE AUDIO INPUT ADJUSTMENT
Receded control adjusts the signal level at the Satellite
Audio input jack. Adjustment affects the satellite
receive/transmit switching sensitivity, except on True
Push-to-Talk systems. (Clockwise turn increases level.)

15. AUXILIARY INPUT JACK
Input for connecting to a tape player or microphone
mixer. (RCA style phono jack)

16. DIAL PAD
Standard key pad for use with analog (single-line)
telephone connection.

17. SLIDE VOLUME CONTROL
Volume adjustment for audio level heard from Internal
Speaker and at External Speaker Output jack.

18. INTERNAL SPEAKER BUTTON
Button controls internal speaker. When activated (light
“ON”), system’s internal speaker is heard. When de­activated (light “OFF”), internal system speaker is not
heard.

19. AUTO ANSWER BUTTON
Button controls auto answer feature. When activated
(light “ON”), incoming calls are automatically answered
after one ring. When de-activated (light “OFF”),
incoming calls ring until answered by activating the
ON/OFF button.

20. SATELLITE AUDIO BUTTON
Button controls satellite and phone-line audio. When
activated (light “ON”), broadcast audio is heard, phone
line audio is not
Audio button enables the muting feature, preventing
echo/feedback problems. When de-activated (light
“OFF), phone line audio is heard, broadcast audio is not
heard.

21. ON LINE/OFF HOOK BUTTON
Button controls whether system is On-Line or Off-Hook.
When activated (light “ON”), dial tone is heard and calls
can be made. When de-activated (light “OFF”), incoming
calls ring until answered by activating the ON/OFF
button.

heard. When activated, the Satellite