Atomik V2MR User Manual

10120 X 2 Ball Bearing

10229 X 2 Ball Bearing

9062 X 1 Washer Spacer

10220 X 2 Washer

9066 X 12 Steel Ball

9034 X 1 Thrust Bearing

9038 X 1 Diff Screw

9053 X 1 Diff Nut

9057 X 1 Diff Spring

10258 X 1 Pin 2 X 8

10228 X 1 Ball Bearing

10112 X 3 Ball Bearing (Rear Motor)
10112 X 5 Ball Bearing (Mid Motor)

10214 X 1 Washer

10256 X 1 Pin 5 X15.8 (Rear Motor)
10256 X 2 Pin 5 X15.8 (Mid Motor)

10203 X 1

Bag A

Bag A

Thank you for purchasing the V2MR. This kit was designed to be fun and easy to drive using high quality parts for great perfor­mance and durability. Please read this instruction manual thoroughly before using this product. Please pay attention to the
warnings and call out notes. The valuable tips in this manual can help prevent accidents and improper use that can lead to part
failure or injury. This kit is a High Performance R/C vehicle that requires regular maintenance for best performance. If you are
unclear on any step or are unsure about how to use your new Atomik V2MR, give our Customer Service Department a call at
800-705-0620 (208-762-0620 for International Customers) and we will be happy to help. You can also email us at

[e-mail].

Caliper

Nut Wrench

Side Cutters

Needle Nose

Double Sided Tape

Thread Lock

Thin CA Glue

Scissors

Hobby Knife

Ruler

Grease

Hex Driver

Shock Oil

Thank You

Recommended Tools

1

10120 X 2 Ball Bearing

10229 X 2 Ball Bearing

9062 X 1 Washer Spacer

10220 X 2 Washer

9066 X 12 Steel Ball

9034 X 1 Thrust Bearing

9038 X 1 Diff Screw

9053 X 1 Diff Nut

9057 X 1 Diff Spring

10258 X 1 Pin 2 X 8

10228 X 1 Ball Bearing

10112 X 3 Ball Bearing (Rear Motor)
10112 X 5 Ball Bearing (Mid Motor)

10214 X 1 Washer

10256 X 1 Pin 5 X15.8 (Rear Motor)
10256 X 2 Pin 5 X15.8 (Mid Motor)

9042

9053

9057

9034

9038

9066

9009

10229

9062

10229

t043

9043

9041

Ball Differential

10120

10220

10220

10120

10256

10203

10112

9029

10214

10228

9036

10258

9040

10112

9009

10112

Idler Gear

9042

9042

9042

1

2

5*6.5*0.5

10.2*12.4*0.2

2.38mm For Ball Diff

5 X 7.3 X 0.2

10203 X 1

O Ring (10X1.5)

Hold diff joint(9041.9042) and tighten
9009 to prevent differential from coming
loose: Be careful not to overtighten

9038. Due to the Movement of different.

Add the washer (10220)
due to the movement of the
differential in the gearbox.

Turn Upside

Down

2

Bag A

Bag A

Side A

10045 X 6 M3 X 10 CH Screw

10046 X 4 M3 X 12 CH Screw

10088 X 1 M4 Nylon Lock Nut

9063 X 1 Washer 4.5 X 8 X 0.8

9037 X 1 Steering Post

8577 X 3 Bell5.7-Short

9056 X 1 Steering Spring

10115 X 2 3 X 6 X 2.5 Ball Bearing

9023 X 2 Turnbuckle

10068 X 2 M3 X 10 BH Screw

Bag B

4

9064 X 1 Spring Holder

10087 X 1 M3 (NyLon Nut)

9058 X 1 Slipper Spring

9045 X 2 Slipper Disk

9007

Side A

9008

9008

9051

9007

9051

10245

10245

10067

9045

9060

9010

9060

9045

9058

9064

10087

Transmission

Side A

Transmission

Rear Motor

Mid Motor

3

10067 X 1 M3 X 8 BH Screw

10245 X 4 M3 X 35 BH Screw

Attach spur gear so that it
rotates without wobbling

Attach spur gear so that it
rotates without wobbling

Bag A

3

10045 X 6 M3 X 10 CH Screw

10046 X 4 M3 X 12 CH Screw

9000

9028

9029

9029

10068

10068

10045

9025

9027

10046

10045

Rear Chassis Plate

5

10088

9063

9056

9011

9011

9011

8577

10115

9029

10068

8577

2.7mm Spacer

9023

9028

9028

9037

10088 X 1 M4 Nylon Lock Nut

9063 X 1 Washer 4.5 X 8 X 0.8

9037 X 1 Steering Post

8577 X 3 Bell5.7-Short

9056 X 1 Steering Spring

10115 X 2 3 X 6 X 2.5 Ball Bearing

9023 X 2 Turnbuckle

30.3

10068 X 2 M3 X 10 BH Screw

3.7mm

2 pcs

Adjust according to the
track surface.

4

Bag B

10067 X 2 M3 X 8 BH Screw

10051 X 4 M2 X 4 BH Screw

10251 X 2 Pin 3 x 26

10254 X 2 Pin 3 x 32.9

9050 X 1 Suspension Mount

9023 X 2 Turnbuckle

Bag D

10087

10115

10045

9011

10115

10045

10253

9011

10087 X 2 M3 Nylon Lock Nut

10253 X 1 Pin 3 X 31.2mm

10115 X 4 3 X 6 X 2.5 Ball Bearing

10045 X 3 M3 X 10mm CH Screw

Steering

7

Steering

8

9035A

10067

10067

8577

9035A

10051

10204

8577

8577

10087

9019

10051

8568

10204

9019

10087

9011

9011

10067 X 2 M3 X 8 BH Screw

8577 X 2 Ball 5.7-Short

10087 X 2 M3 Nylon Lock Nut

10204 X 4 Washer 3 x 6 x 0.2

10051 X 2 M2 X 4 BH Screw

8568 X 2 Pin 3 x 24

9035A X 2 Front Axle
9035B X 2 Front Axle

8568

8577 X 2 Ball 5.7-Long

9035A For 5.0(ID) Bearing

9035B For 3/16”(ID) Bearing

5

Bag C

Front Arm

9

10067 X 2 M3 X 8 BH Screw

10051 X 4 M2 X 4 BH Screw

10251 X 2 Pin 3 x 26

10254 X 2 Pin 3 x 32.9

9050 X 1 Suspension Mount

9023 X 2 Turnbuckle

9001

9029

9029

9029

9029

10251

10251

10051

10051

10067

9050

9026

10254

10254

10051

10051

9023

9028

9028

10

Front Arm

Attaching Front Arms

30.8

2mm Spacer

4 pcs

6

Bag D

10051 X 2 M2 X 4 BH Screw

10255 X 2 Pin 3 X 51.6

Bag F

11

10068

10241

10232

9013

8577

9012

10068

10047

9015

Attaching Front Shock Tower

10232 X 2 M3 Ni-Plated Nut

10068 X 6 M3 X 10 BH Screw

10241 X 2 M3 X 22 BH Screw

10047 X 4 M3 X 14 CH Screw

8577 X 2 Ball 5.7-Long

8577 X2 Ball 5.7-Long

10087 X 2 M3 Nylon Lock Nut

10087

10087

9018

8577

9029

9029

10252

9002

9002

10252

8577

8577

10087

10087

9018

9029

9029

9018

10051

8577

9002

9018

10252

10252

10051

10051

10051

9002

12

Mid Motor

Rear Arm

Rear Motor

10252 X 2 Pin 3 X 27

10051 X 2 M2 X 4 BH Screw

1mm Spacer

2 pcs

7

Bag E

Bag F

Rear Arm

13

Mid Motor

Rear Motor

10051 X 2 M2 X 4 BH Screw

10255 X 2 Pin 3 X 51.6

10255

10255

10051

10255

10255

10051

8

Bag F

10232 X 2 M3 Nut Ni-Plated

10068 X 7
Rear Motor

10068 X 3
Mid Motor

10241 X 2

10005 X 2
(Not Included)

8577 X 2 Ball5.7-long

Bag G

Rear Motor

Mid Motor

10047

10047

10047X 4 M3 X 14 CH Screw

Attaching Transmission

14

9

Bag F

10241

10241

9029

10068

8577

9029

10241

9017

9012

10232

10068

10068

10232

10232

10232

10005

(Not Included)

(Not Included)

(Not Included)

(Not Included)

10068

9017

9013

10241

9013

10005

9029

9029

10232 X 2 M3 Nut Ni-Plated

10068 X 7

M3 X 10 BH Screw

Rear Motor

10068 X 3

M3 X 10 BH Screw

Mid Motor

10241 X 2

M3 X 22 BH Screw

10005 X 2

M2 X 8 SH Screw

(Not Included)

8577 X 2 Ball5.7-long

Attaching Shock Tower

15

Rear Motor

Mid Motor

(Not Included)

9029

(Not Included)

9029

10

Bag G

10067 X 4 M3 X 8 BH Screw

10068 X 2 M3 X 10 BH Screw

10112 X 2 5 X 10 X 4mm Bearing

Bag H

CVD & Rear Turnbuckle Set

16

23.5

1:1

30

1:1

10013

9023

9028

9028

9039

9067

Rear Motor Mid Motor

10044 X 2 M3 X 8 CH Screw

9067 X 2 Pin2.0 X 10 (With Groove)

10013 X 2 M3 X 3 Set Screw

9023 X 2 Turnbuckle

8577

9024

10044

2 sets2 sets

11

Bag H

10112

10112

17

Rear Motor

10067

10068

10068

10067

Rear Shock Tower

10067 X 4 M3 X 8 BH Screw

10068 X 2 M3 X 10 BH Screw

10112 X 2 5 X 10 X 4mm Bearing

12

Bag H

10240 X 2 M3 X 15 BH Screw

10067 X 2 M3 X 8 BH Screw

10044 X 2 M3 X 8 CH Screw

10043 X 2 M3 X 6 CH Screw

Bag I

10240

10069

Mid Motor

10112

10112 X 2 5 X 10 X 4mm Bearing

10240 M3 X 15 BH Screw

10069 M3 X 12 BH Screw

13

9016

10067

10044

10240

9029

Motor Guard / Rear Bumper

18

Rear Motor

Mid Motor

10044

10043

9016

10240 X 2 M3 X 15 BH Screw

14

10067 X 2 M3 X 8 BH Screw

10044 X 2 M3 X 8 CH Screw

10043 X 2 M3 X 6 CH Screw

Bag I

10224 X 8 2.3mm E-Clip

9049 X 4 Spring Retainer

10005 X 4 M2 X 8 SH Screw

9032 X 2 Front Shock Shaft

9033 X 2 Rear Shock Shaft

9028 Piston 4 Holes
(STD.)

10202 X 8 “O” Ring 7 X 2.2

10200 X 4 “O” Ring 16.5 X 1

10210 X 4 “O” Ring 18.2 X 1.6

Use when the air
pressure hole (1.5mm)
on the 9031 is open.

Bag J

10067 X 2 M3 X 8 BH Screw

ESC Mount

19

Rear Motor

Motor Braces

Mid Motor

10240 X 1 M3 X 15 BH Screw

10044 X 2 M3 X 8 CH Screw

10241 X 1 M3 X 22 BH Screw

10067

9030

10067

9065

10240

10241

10044

15

Bag I

1mm 1mm

9049

9049

10005

10201

10201

9046

9047

10200

10200

9032

9033

9048

9028

9028

9028

9028

9048

9031

9031

9028

9028

10224

10224

10224

10224

9029

10202

10202

9029

1. Pull down piston and pour oil into
body. Remove air bubbles by slowly
moving piston up and down.

2. Pull down piston and check amount
of oil and tighten shock cap.

Shock F/R Assembly

Shock Oil

20

21

10224 X 8 2.3mm E-Clip

9049 X 4 Spring Retainer

10005 X 4 M2 X 8 SH Screw

9032 X 2 Front Shock Shaft

9033 X 2 Rear Shock Shaft

9028 Piston 4 Holes
(STD.)

10202 X 8 “O” Ring 7 X 2.2

10200 X 4 “O” Ring 16.5 X 1

10210 X 4 “O” Ring 18.2 X 1.6

Front Shock 2 pcs

Rear Shock 2 pcs

Use when the air
pressure hole (1.5mm)
on the 9031 is open.

1mm Spacer

4 pcs

1mm Spacer

4 pcs

16

Bag J

8577 X 1 Ball 5.7 (Short)

9054 X 2 Shock Spring - Front

10241 X 2 M3 X 22 BH Screw

10067 X 4 M3 X 8 BH Screw

10087 X 2 M3 Nylon Lock Nut

Bag J

Bag K

9055

9028

9028

10240

9028

10087

10087

10087

10240

10240

10087

9028

Attaching Rear Shocks

Rear Shocks

22

9055 X 2 Shock Spring - Rear

10087 X 2 M3 Nylon Lock Nut

10240 X 2 M3 X 15 BH Screw

Mid Motor

Rear Motor

23

10240

9028

9028

9028

2 pcs2 pcs

9028

9028

17

Bag J

9028

8577 X 1 Ball 5.7 (Short)

10241

9029

10067

10067

8577

9031

M3 X 6 BH Screw

Use for Futaba Servo

Use for JR/SANWA Servo

Servo

10241

10087

9054 X 2 Shock Spring - Front

10241 X 2 M3 X 22 BH Screw

Attaching Front Shocks

Front Shocks

24

25

Steering Servo Asembly

26

9054

9028

9028

10087

10067 X 4 M3 X 8 BH Screw

2 pcs2 pcs

10087 X 2 M3 Nylon Lock Nut

18

Bag J

Bag K

10068 X 1 M3 X 10 BH Screw

10044 X 2 M3 X 8 CH Screw

10066 X 1

10045

9028

10014

Motor

9014

Installing Steering Servo

27

Installing Motor

28

10013 X 1 M3 X 3mm Set Screw

10067 X 2 M3 X 8 BH Screw

9052 X 1 Pinion Gear 20T (STD.)

10013

9052

10045 X 2 M3 X 10 CH Screw

10014 X 2 M3 X 10 Set Screw

Tighten the screws with
on sheet of paper inserted
between both gears.

Rear Motor

10067

10066

9029

10066

10066 X 2

M3 X 6 BH Screw

9028

19

Pinion
Gear

Spur Gear

77T

9.53

9.10

8.70

8.34

8.01

79T

10.27

9.78

9.34

8.93

8.56

8.22

20T

21T

22T

23T

24T

25T

Bag K

Bag K

5mm

10013

10044

10066

9029

10068

10067

Mid Motor

10068 X 1 M3 X 10 BH Screw

10044 X 2 M3 X 8 CH Screw

10066 X 1

M3 X 6 BH Screw

9014

20

Motor

Bag M

10226

10226

9059

9061

9061

Battery Pack

10226

10226

9061

9061

Battery Pack

9059

10226 X 4 Body Clip

Installing Battery Pack

29

Mid Motor

Rear Motor

21

Bag L

Mid Motor

Rear Motor

Receiver and ESC Installation

30

Receiver

2009CL

ESC

Switch

Double Side Tape
( Not Included )

Double Side Tape
( Not Included )

Double Side Tape
( Not Included )

Receiver

ESC

Switch

2009CL

22

Bag M

10112 X 4 5 X 10 X 4mm Bearing

10067 X 2 M3 X 8 Bind Screw

Notes:

1. Clean Tire and Wheel
of any dirt or grease.

2. After fitting Wheels to
tires apply instant glue
as shown.

Bag L

ESC Wire Routing

31

Mid Motor

Rear Motor

23

Warning !

Carbon Battery Plate is conductive.
Be sure all wires have proper
insulation installed.

Warning !

Carbon Battery Plate is conductive.
Be sure all wires have proper
insulation installed.

9003

9004

10067

10067

10112

10112

10112

10112

10112 X 4 5 X 10 X 4mm Bearing

10067 X 2 M3 X 8 Bind Screw

Wheel Assembly

32

Notes:

1. Clean Tire and Wheel
of any dirt or grease.

2. After fitting Wheels to
tires apply instant glue
as shown.

33

Attaching Front Wheels

Rear Tire

Front Tire

24

Kit Version
Not Included

Kit Version
Not Included

Bag L

10226 X 2 Body Clip

Bag L

Attaching Rear Wheels

34

Rear Motor

Mid Motor

9044

9029A

9029B

9029B

9029A

10233

10233

9044

10112

10150

9044

10150

10112

9029B

9029A

10150

9029B

9029A

10112

10233

10150 X 4 Pin 2 x 10

10112 X 2 5 X 10 X 4mm Bearing

10233 X 2 (Flange) M4 Nylon Nut Aluminium

9044 X 2 Rear Alxe Washer

9029A X 2 Spacer 5.1 X 6.8 X 1

9029B X 2 Spacer 5.2 X 7.6 X 4

10233

10150

9044

10112

25

Bag L

Mid Motor

Rear Motor

10226 X 2 Body Clip

Attaching Wing

35

10226

9068

9017

9017

10226

9068

26

Bag L

9000 9001 9002 9003

9004 9007 9008 9009

9010 9011 9012 9013

9014 9015 9016 9017

9018 9019 9020 9021

9022 9023

Chassis - V2MR Front Arm - V2MR Rear Arm - V2MR Front Wheel - White - V2MR

Rear Wheel - White - V2MR

Spur Gear 77T/79T - V2MR Steering Parts - V2MR

Gear Cover - V2MR Front Bumper - V2MR Motor Guard & Rear Bumper

Rear Hub - V2MR C Hub - V2MR Steering Hub - V2MR Front Shock - V2MR

Rear Shock - V2MR Turnbuckle Set - V2MR

10226 X 3 Body Clip

Attaching Body

36

Mid Motor

Rear Motor

27

9068

10226

10226

9068

10226

10226

Bag L

9000 9001 9002 9003

9004 9007 9008 9009

9010 9011 9012 9013

9014 9015 9016 9017

9018 9019 9020 9021

9022 9023

Chassis - V2MR Front Arm - V2MR Rear Arm - V2MR Front Wheel - White - V2MR

Rear Wheel - White - V2MR

Transmission Case - Rear Motor

- V2MR

Transmission Case - Mid Motor

- V2MR

Diff. Gear 52T/27T - V2MR

Spur Gear 77T/79T - V2MR Steering Parts - V2MR

Shock Tower Mount F/R - V2MR

Shock Tower F/R - V2MR

Gear Cover - V2MR Front Bumper - V2MR Motor Guard & Rear Bumper

- V2MR

Wing Brace - V2MR

Rear Hub - V2MR C Hub - V2MR Steering Hub - V2MR Front Shock - V2MR

Rear Shock - V2MR Turnbuckle Set - V2MR

1 pc 2pcs 2 pcs

L: 1 pc

R: 1 pc

2 pcs 1 set 1 set 1 set

1 set 1 set 1 set1 set

1 pc 1 pc 1 set 1 set

1 set 1 set 1 set 1 set

1 set 1 set

9024 9025

Shock Tower Mount For
Mid Motor - V2MR

Rear Chassis Plate - V2MR

1 pc 1 pc

28

10014

M3 x 10mm Set Screw(6pcs)

9050 9051 9052

9054 9055 9056

9058

Suspension Mount - V2MR Motor Plate - V2MR Pinion Gear 20T - V2MR

Shock Spring Front - V2MR Shock Spring Rear - V2MR Steering Spring - V2MR

Slipper Spring - V2MR

9062

Washer Spacer
5 x 6.5 x 0.5 - V2MR

9066

Steel Ball 2.38mm for Ball Diff.

- V2MR

9026 9027 9028 9029

9030 9031 9032 9033

9034 9035

9036

9037

9038 9039 9040

9041

9042 9043 9044

9045

Front Suspension Arm Mount

- V2MR

Shock Parts Plastic - V2MR Small Parts - V2MR

ESC Mount - V2MR Shock Top Cover - V2MR Front Shock Shaft - V2MR Rear Shock Shaft - V2MR

Thrust Bearing - V2MR Front Axles - V2MR

Slipper Shaft - V2MR

Steering Post - V2MR

Diff. Screw - V2MR CVD Shaft - V2MR Counter Gear - V2MR

Diff. Joint(Long) - V2MR

Diff. Joint(Short) - V2MR Diff. Plate - V2MR Rear Axle Washer - V2MR

Slipper Disk - V2MR

1 pc

2 pcs2 pcs

2 pcs

1 pc

1 pc

1 pc

2 pcs

2 pcs

9035A

9035B

2 pcs

1 set 1 set

2 sets

1 pc

1 pc

1 pc

2 pcs

2 pcs2 pcs1 pc

1 set

9046 9047

Shock Body Front - V2MR Shock Body Rear - V2MR

2 pcs 2 pcs

9048

Shock Seal Cap - V2MR

2 pcs

2 pcs

9035A 5.0(I.D) Bearing
9035B 3/16”(I.D) Bearing

9049

Spring Retainer - V2MR

29

ATOMIK

ATOMIK

ATOMIK

ATOMIK

ATOMIK

ATOMIK

Rear Suspension Arm Mount

3.0 - V2MR

9059 9060

9061

10013

10014

Battery Plate - V2MR Slipper Pad - V2MR

Battery Pad - V2MR

9065

Mid Motor Support Braces

- V2MR

M3 x 3mm Set Screw(6pcs)

M3 x 10mm Set Screw(6pcs)

1 pc 2 pcs

2 pcs

4 pcs

6 pcs

6 pcs

9050 9051 9052

9053

9054 9055 9056

9057

9058

Suspension Mount - V2MR Motor Plate - V2MR Pinion Gear 20T - V2MR

Diff. Nut - V2MR

Shock Spring Front - V2MR Shock Spring Rear - V2MR Steering Spring - V2MR

Diff. Spring - V2MR

Slipper Spring - V2MR

9062

Washer Spacer
5 x 6.5 x 0.5 - V2MR

9066

Steel Ball 2.38mm for Ball Diff.

- V2MR

9067

Pin 2 x 10 (With Groove)

- V2MR

9068

Body Set - V2MR

9063

Washer Spacer

4.5 x 8 x 0.8 - V2MR

9064

Spring Holder - V2MR

2 pcs

2 pcs

4 pcs 4 pcs

6 pcs12 pcs

1 pc 1 pc

2 pcs

1 pc

1 pc

1 set

1 set

1 set

1 set

10043 10044

M3 x 6mm CH Screw(6pcs)

M3 x 8mm CH Screw(6pcs)

M3 x 10mm CH Screw(6pcs)

6 pcs 6 pcs

10045

6 pcs

30

10252 10253 10254 10255

10256

Pin 3 x 27mm(2pcs)

Pin 5 x 15.8mm(2pcs)

O - Ring 10*1.5(8pcs)

10203 10204

Body Clip - V2MR

10112

10115

10229

1022810120

10232

10087 10233

M3 Ni-Plated Nut(6pcs)

M3 Nylon Lock Nut(6pcs)

M4 Nylon Lock Nut(6pcs)

10088

M4 Nylon Lock Nut Aluminium
(6pcs)

10150

2mm x 10mm Roll Pin(6pcs)

6 pcs

10240

10241 10245

10005

5 x 10 x 4mm Bearing(4pcs)

6 x 3 x 2.5mm Bearing(4pcs)

10 x 15 x 4mm Bearing(4pcs)

4 x 8 x 3mm Bearing(4pcs) 5 x 8 x 2.5mm Bearing(4pcs)

10047 10051 10066

10067 10068

10046

10069

6 pcs 6 pcs 6 pcs 6 pcs

6 pcs 6 pcs 6 pcs 6 pcs

6 pcs 6 pcs

6 pcs 6 pcs

6 pcs 6 pcs 6 pcs

4 pcs

4 pcs4 pcs4 pcs4 pcs

10258 8568

Pin 2 x 8mm(6pcs) Pin 3 x 24mm(2pcs)

- Gambler / V2MR

6 pcs 2 pcs

M3 x 12mm CH Screw(6pcs) M3 x 14mm CH Screw(6pcs) M2 x 4mm BH Screw(6pcs)

M3 x 8mm BH Screw(6pcs) M3 x 10mm BH Screw(6pcs) M3 x 12mm BH Screw(6pcs) M3 x 15mm BH Screw(6pcs)

M3 x 22mm BH Screw(6pcs)

M3 x 35mm BH Screw(6pcs)

M2 x 8mm SH Screw(6pcs)

M3 x 6mm BH Screw(6pcs)

10251

Pin 3 x 26mm(2pcs)

2 pcs

31

8577

2 pcs6 pcs

Pivot Ball Set - Gambler / V2MR

.

10252 10253 10254 10255

10256

Pin 3 x 27mm(2pcs)

Pin 5 x 15.8mm(2pcs)

Pin 3 x 31.2mm(2pcs)

Pin 3 x 32.9mm(2pcs) Pin 3 x 51.6mm(2pcs)

10200

O - Ring 16.5*1(8pcs)

O - Ring 10*1.5(8pcs)

2 pcs 2 pcs

2 pcs 8 pcs

8 pcs

8 pcs

8 pcs

2 pcs 2 pcs

10201

10202

10203 10204

10214

1022410226

O - Ring 18.2*1.6(8pcs)

O - Ring 7*2.2(8pcs)

Washer 3*6*0.2 - V2MR

Washer 5*7.3*0.2 - V2MR Washer 10.2*12.4*0.2 - V2MR

2.3MM E - Clip Black(6pcs)

Body Clip - V2MR

10220

6 pcs 6 pcs

8 pcs 6 pcs

6 pcs

32

Upright Spacer

Rear Upright Spacer

1mm F

F mm
R mm

Balance Weight

g

ELECTRONICS

Esc:

Servo Expo:

Motor:
Battery:

Pinion Gear:

Battery Position:

Spur Gear:

Radio:
Servo:

Initial Brake:
Drag Brake:
Throttle Profile:

Timing Advance:
Throttle/Brake Expo:

Throttle/Brake EPA:

Type:

Insert:

FRONT TIRES

Type:

Compound:

Insert:

Wheel:

Air Holes:

Additive:

REAR TIRES

Compound:

Wheel:

Air Holes:

Additive:

1

2

3

4

2

1

213

213

COMMENTS

Steering Position

2

1

1

2

3

4

2

1

2

1

213

Shock Position

Shock Position

Camber Link Position

Camber Link Position

Track

Track Condition

Event

Driver

Date

SETUP SHEET

REAR SUSPENSION

FRONT SUSPENSION

Camber:
Toe:

Caster Angle:

25°

30°Option Part

Oil:
Piston(holes):
Front Spring:

Ride Height:

Shock Limiters:

Shock Position:

Front Tower

1

2 3

4

Front Arm

1

2 3

Camber Link:

Front Tower

1

2

C-Hub

1

2

Camber:

Anti-Squat:

Oil:

Piston(holes):

Rear Spring:

Chassis Configuration:

Rear Motor

Mid Motor

Ride Height:

Shock Limiters:

Toe:

3°

2.5°Option Part 2°Option Part

3°

2.5°Option Part 2°Option Part

Shock Position:

Rear Tower

1

2

R

3

4

Rear Arm

1

2 3

Camber Link:

Rear Tower Mount

1

2

Rear Hub

1 2 3

33

Upright Spacer

Rear Upright Spacer

1mm F

F mm
R mm

Balance Weight

g

ELECTRONICS

Esc:

Servo Expo:

Motor:
Battery:

Pinion Gear:

Battery Position:

Spur Gear:

Radio:

Servo:

Initial Brake:

Drag Brake:

Throttle Profile:

Timing Advance:
Throttle/Brake Expo:

Throttle/Brake EPA:

Type:

Insert:

FRONT TIRES

Type:

Compound:

Insert:

Wheel:

Air Holes:

Additive:

REAR TIRES

Compound:

Wheel:

Air Holes:

Additive:

1

2

3

4

2

1

213

213

COMMENTS

Steering Position

2

1

1

2

3

4

2

1

2

1

213

Shock Position

Shock Position

Camber Link Position

Camber Link Position

Track

Track Condition

Event

Driver

Date

SETUP SHEET

REAR SUSPENSION

FRONT SUSPENSION

Camber:

Toe:

Caster Angle:

25°

30°Option Part

Oil:
Piston(holes):
Front Spring:

Ride Height:

Shock Limiters:

Shock Position:

Front Tower

1

2 3

4

Front Arm

1

2 3

Camber Link:

Front Tower

1

2

C-Hub

1

2

Camber:

Anti-Squat:

Oil:

Piston(holes):

Rear Spring:

Chassis Configuration:

Rear Motor

Mid Motor

Ride Height:

Shock Limiters:

Toe:

3°

2.5°Option Part 2°Option Part

3°

2.5°Option Part 2°Option Part

Shock Position:

Rear Tower

1

2

R

3

4

Rear Arm

1

2 3

Camber Link:

Rear Tower Mount

1

2

Rear Hub

1 2 3

34

Atomik RC USA

14028 N. Ohio Street
Rathdrum, Idaho 83858

Australia

PO Box 7325
Alexandria NSW 2015

Customer Service

800.705.0620

208.762.0620 (Outside USA)
[e-mail]

Copyright 2012 Atomik RC

General Warranty Policies
Atomik™ warrants this product to be free of material and workmanship defects when new. Atomik™ will at its sole discretion repair or replace defective
components free of charge within 90 days from date of purchase or within 30 days for all electronic components. This warranty does not cover wear and tear,
crash damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use. All warranty claims are to be directed
to Atomik™ Customer Service at 1-800-705-0620 (208-762-0620) or [e-mail].

GUARANTEE
All products are inspected and adjusted individually before leaving the manufacturer and are guaranteed to be free of material defects and manufacturing
faults.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Adult supervision is required when using this product. This product should be assembled by an adult before use. Proper assembly should be checked by an
adult before use. This product should be periodically examined by an adult for potential hazards. Any potential hazardous parts should be repaired or replaced.

Important Notice
Atomik™ assumes sole responsibility for our products; therefore, dealers should not be involved in any warranty issues. All warranty claims are to be directed
to Atomik™ Customer Service. Before returning any defective product, please contact Atomik™ Customer Service at 800-705-0620 (208-762-0620) or
[e-mail] to receive a Return Merchandise Authorization Number. A dated & itemized sales receipt must accompany any product
returned for warranty work.

Release of Liability
Atomik™, It’s affiliates, manufacturers, distributors, or retail partners shall not be held liable for any accident, injury to persons, or damage to property resulting
from use, misuse, or abuse of any Atomik product. In purchasing a Atomik™ product the user agrees to accept responsibility for all such risks.

This product contains chemicals known to the State of California to cause Cancer, Birth Defects and other Reproductive Harm. Be responsible, dispose of
properly.

General Warranty Policies
Atomik™ warrants this product to be free of material and workmanship defects when new. Atomik™ will at its sole discretion repair or replace defective
components free of charge within 90 days from date of purchase or within 30 days for all electronic components. This warranty does not cover wear and tear,
crash damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use. All warranty claims are to be directed
to Atomik™ Customer Service at 1-800-705-0620 (208-762-0620) or [e-mail].

GUARANTEE
All products are inspected and adjusted individually before leaving the manufacturer and are guaranteed to be free of material defects and manufacturing
faults.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Adult supervision is required when using this product. This product should be assembled by an adult before use. Proper assembly should be checked by an
adult before use. This product should be periodically examined by an adult for potential hazards. Any potential hazardous parts should be repaired or replaced.

Important Notice
Atomik™ assumes sole responsibility for our products; therefore, dealers should not be involved in any warranty issues. All warranty claims are to be directed
to Atomik™ Customer Service. Before returning any defective product, please contact Atomik™ Customer Service at 800-705-0620 (208-762-0620) or
[e-mail] to receive a Return Merchandise Authorization Number. A dated & itemized sales receipt must accompany any product
returned for warranty work.

Release of Liability
Atomik™, It’s affiliates, manufacturers, distributors, or retail partners shall not be held liable for any accident, injury to persons, or damage to property resulting
from use, misuse, or abuse of any Atomik product. In purchasing a Atomik™ product the user agrees to accept responsibility for all such risks.

This product contains chemicals known to the State of California to cause Cancer, Birth Defects and other Reproductive Harm. Be responsible, dispose of
properly.

www.facebook.com/AtomikRC www.twitter.com/Atomik_RC www.youtube.com/theatomikrc

Notice of Rights
All rights reserved. No part of this manual may be reproduced or transmitted in any form by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Atomik™. For information on getting permission for reprints and excerpts, contact [e-mail].

Notice of Liability
The information in this manual is distributed on an “As Is” basis, without warranty. While every precaution has been taken in the preparation of the manual, Atomik™
does not have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the information
contained in this manual or by the products described in it.