Page 1
AMERICAN
TECHNOLOGIES
Page 2
American Technologies Network Corp.
20 S. Linden Ave. Suite 1B,
South San Francisco, CA 94080
fax: 650-875-0129
fax: 44(0) 870-121-3590
The following countries can use our
toll free number 00 800 9102-8620
Austria, France, Germany, Holland, Italy,
Spain, Sweden, Switzerland
www.atncorp.com
2 YEAR PRODUCT WARRANTY
This product is guaranteed to be free from man-
from the date of purchase. In the event a defect
that is covered by the foregoing warranty occurs
during the applicable period stated above, ATN,
at its option, will either repair or replace the
shall be the full extent of ATN’s liability, and the
Customer’s sole and exclusive remedy. This
warranty does not cover a product (a) used in
other than its normal and customary manner;
tions, modifications or repairs by the Customer
of by any party other than ATN without prior
written consent of ATN; (d) special order or
“close-out” merchandise or merchandise sold
“as-is” by either ATN or the ATN dealer; or (e)
the control of ATN. ATN shall not be responsible
for any defects or damage that in ATN’s opinion
electrically or mechanically incompatible with
or of inferior quality to the product, as well as
failure to maintain the environmental conditions
specified by the manufacturer. This warranty is
extended only to the original purchaser. Any
the customer notifies ATN at the address noted
The customer understands and agrees that
except for the foregoing warranty, no other
warranties written or oral, statutory, expressed
or implied, including any implied warranty
of merchantability or fitness for a particular
disclaimed.
ATN will not be liable for any claims, actions,
suits, proceedings, costs, expenses, damages
or liabilities arising out of the use of this prod-
sole responsibility of the Customer. ATN’s sole
and services outlined herein in accordance
with the terms and conditions of this Agree-
either expressly or implied, as being for the
third party of legal entity outside ATN and the
Customer; ATN’s obligations under this Agree-
ATN’s
of the form or action, shall not exceed the
fees or other charges paid to ATN by the
customer or customer’s dealer. ATN shall
damages were foreseeable or not at the
time of purchase, and whether or not such
damages arise out of a breach of warranty,
a breach of agreement, negligence, strict
ATN must receive a completed Product Warranty
our Service Center: ATN Corporation, 20 South
94080. Products qualifying for warranty repair
will be either repaired or replaced within 10 busi-
customer is notified otherwise.
Obtaining warranty service
To obtain warranty service on your unit, take or
send the product, postage paid, with a copy of
your sales receipt to our service center, ATN
Corporation at the address noted above. All
correct postage; ATN will not be responsible
for improper postage, or, missing or damaged
Page 3
The information in this manual furnished for information use only, is subject to change without notice, is not
to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
©2004 ATN Corp. All right reserved.
SPECIFICATIONS
• Magnification: 1
• Exit Pupil: 22 mm
• Windage & Elevation adjustment
• Multi-Reticle System
• Parallax Free
• 3V lithium battery (CR2032)
• Dimensions: 69x30x52 mm
• Weight: 60 g
Windage
Automatic
sensor
THREE RETICLE PATTERNS
4 MOA
4 MOA
64 MOA
4 MOA
APPLICATION
The New Ultra Sight Digital Compact was
designed to be a both eyes open, heads-up,
At half the size and with all the features of
the regular Digital Ultra Sight the Ultra Sight
three reticle patterns with a simple push of
a button. Unlike all other systems with inter-
changeable retitcles the Ultra Sight DC will
then back on it will remember the last reticle
accurate windage and elevation system
• 3 reticle patterns to choose from. Pattern
can be changed with a push of a button.
• Automatic adjusting of reticle pattern
• Parallax Free.
• Instant Target acquisition.
• Fits standard Weaver style base.
• Ideal for handguns, rifles and shotguns.
• Heads up display for extra wide field of
view.
• Installs quickly using 2 thumbnut tightened
clamps for extra stability.
• High intensity diode for super bright reticle
• Two-color Mode Indicator.
• Efficient electrical design for long battery
4 MOA
64 MOA
8 MOA
Page 4
OPERATING INSTRUCTION
The battery (included) is a coin style 3Volt
and open the body of unit.
order shown on the base of unit.
Turning the Ultra Sight on
After the battery is inserted press Power/
AUTO
tor light will glow green. By pressing the
• Press once for: To turn unit on in
AUTO
glow green.
• Press twice for:
• Press third time: To turn Ultra sight off.
through it with both eyes open to see reticle
with three reticle patterns.
• Dot
• Post
• Post with Dot
You can choose your preferred pattern
The Ultra Sight Digital Compact are
designed to be mounted on a standard 7/8
weaver rail.
Be sure gun is not loaded. Use
the receptor attachment screw. Re-tighten
AUTOMATIC BRIGHTNESS SENSOR
Your Ultra Sight DC has a built in Automatic
cally adjusts the brightness of the reticle to
the optimal level.
This sensor also will require an occasional
cleaning. To do this please gently wipe
clean with an optical or soft cloth.
WINDAGE AND ELEVATION ADJUSTMENTS
The vertical (elevation) and horizontal
screw before windage/elevation adjustment.
After finishing of adjustment turn the lock-
The Ultra Sight Digital Compact are
waterproof and shock-proof. However,
you should never try to take apart or clean
adjustments, it should be returned to ATN's
service department. The exposed optical
surfaces will perform their best if they are
occasionally wiped clean with a lens cloth
or with optical quality lens paper like those
for eyeglasses or camera lenses. Maintain
the metal surfaces of you Ultra Sight by
so as to avoid scratching the finish. Wipe
down the unit with a damp cloth and follow
with a dry cloth. Finally, going over the
Loading...