ATN Trident Pro-2, Trident Pro-2I, Trident Pro-2IA, Trident Pro-CGT, Trident Pro-CGTI User Manual
u s e r ` s g u i d e
ATN Trident Pro
Important Export Restrictions! Commodities, prod-
ucts, technologies and services contained in this manual
are subject to one or more of the export control laws and
regulations of the U.S. Government and they fall under the
control jurisdiction of either the US Department of State
or the US BIS-Department of Commerce. It is unlawful
and strictly prohibited to export, or attempt to export or
otherwise transfer or sell any hardware or technical data
or furnish any service to any foreign person, whether
abroad or in the United States, for which a license or written approval of the U.S. Government is required, without
first obtaining the required license or written approval
from the Depar tment of the U.S. Government having
jurisdiction. Diversion contrary to U.S. law is prohibited.
AMERICAN
TECHNOLOGIES
NETWORK
CORP.
Trident Pro-2
Trident Pro-2I
Trident Pro-2IA
Trident Pro-CGT
Trident Pro-CGTI
The information in this manual furnished for information use only, is subject to change without notice, is not to be
construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
©2006 ATN Corp. All right reserved.
APPLICATION
The ATN Trident Pro from ATN is a rugged, 2X night vision weapon sight that provides excellent observation, target acquisition and aiming capabilities for the demanding sports shooter
or varmint hunter.
The Trident is available in a variety of Image Intensifier Tube configurations to fit into a wide
array of budgets.
The best optics, tubes and performance make the ATN Trident Pro one of the best commercial
night vision weapon sights there is!
Operating
button
F1:1.2 lens
Elevation
Windage
5 Diopter
Battery
housing
Back-up iron sights
Mounting
system
IR brightness
adjustment
DIGITAL
INFRA-RED
ILLUMINATOR
Battery
housing
Fixation
screw
IR elevation
IR windage
IR focusing
AFOCAL 2X
MAGNIFIER
(OPTIONAL)
Picatinny
rails
Lens cap
•
LIGHT AND COMPACT DESIGN
•
TOP-NOTCH PERFORMANCE WITH
PRO-ORIENTED DESIGN
•
2X MAGNIFICATION WITH NEW F1:1.2
LENS, 50MM
•
OPTIONAL AFOCAL 2X MAGNIFIER
•
ALL EXTERNAL SURFACES ARE A
NON-REFLECTIVE MATTE BLACK
FINISH (EXCEPT FOR THE OPTICAL
ELEMENTS)
•
BACK-UP IRON SIGHTS
•
“RED ON GREEN” RETICLE SYSTEM
WITH 1/2 MOA ADJUSTMENT
•
ILLUMINATED CENTER RED RETICLE
FOR OPTIMAL CONTRAST AGAINST A
DARK OR LIGHT TARGET
•
AUTOMATIC BRIGHTNESS
CONTROL(ABC) FOR TUBE PROTEC TION
•
ONE-BUTTON OPERATION. CON-
TROLS AND ADJUSTMENTS ARE
SIMPLE AND EASY TO OPERATE.
PUSH BUTTON POWER ON/OFF. THE
RETICLE BRIGHTNESS VARIES FROM
OFF TO FULL BRIGHT WITH A PUSH OF
A BUTTON
•
WATERPROOF 20M, 1 HOUR
•
MOUNTS TO STANDARD WEAVER
RAILS
•
TRIDENT IS DESIGNED TO USE
1 LITHIUM BATTERY
FEATURES
Remote
control
2
SPECIFICATIONS
Generation ...................................................................................................... 2nd, 2nd +
Magnification................................................................................................... 2X (4X optional)
Objective:
Focal lenght................................................................................................... 50 mm
F N umber................................................................................................... 1.2
Foc us................................................................................................... Fixe d
FOV ................................................................................................................. 20 deg.
Reticle ............................................................................................................. Red On Green
Windage & elevation adjustments ................................................................. 1/ 2MOA
IR illuminator ................................................................................................... Super 450mw
Battery life....................................................................................................... 30-50 hours
Dimensions ........................................................................................ 250 x 95 x 85mm/10” x 3.6” x 3.2”
Weight ............................................................................................................ 0.9kg /2 Lbs
Diopter adju stment ........................................................................................ + /- 5
Operating temperature ........................................................................................ -40°C to +40°C
PREPARATION FOR OPERATION
Before getting started make sure to follow these
steps:
• Install the battery into its housing with the polarity
order shown on the main body of the unit.
• Switch on the scope with the protective lens cover
still attached to the lens.
• Make sure that the green luminance of the light
intensifier tube is present.
• Observe the scene, and adjust the diopter and /or
lens for optimal image clarity.
• You may now enter a dark environment or simply
shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter.
• Finally, you may want to turn the infra red (IR) illuminator on. Notice the ability of the scope to
see in total darkness with the aid of the IR illuminator.
OPERATING
MOUNTING
1. Slightly loosen the fixing screws on the 7/8” weaver mount built into the scope.
2. Place the scope on the weaver rail of the fire arm.
3. Tighten the fixing screws.
NOTE: Fixing screws may need to be tightened after continuous shooting.
MOUNTING SYSTEM
The ATN Night Vision Riflescopes Mounting System allows to change the position of the riflescope flexibly on the weapon in relation to a shooter in combination with the fixed positions
already available on the weaver rail. For this purpose in the base of the mounting bracket there
is a rail with a fixing projection. There are two grooves in the mounting bracket for mounting
this rail. Besides it is possible to change the position of the riflescope additionally by 1/3 of
inch. For doing this one needs to about-face the rail.
Battery
installation
Loading...