ATN NZT-625 User Manual
u s e r ` s g u i d e
Export of night vision equipment
and optical sighting equipment
is controlled by the U.S. Department of State, Office of Defense
Trade Controls in accordance
with International Traffic in Arms
(ITAR), Title 22, Code of Federal
Regulations Part 120-130and/or the
Export Administration Regulations
(EAR) U.S. Department of Commerce. Illegal export of these commodities is strictly prohibited.
AMERICAN
TECHNOLOGIES
NET WORK
CORP.
NZT625
NIGHT VISION SPOTTING SCOPE
The information in this manual furnished for information use only, is subject to change without notice,
is not to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
©2005 ATN Corp. All right reserved.
FEATURES
• Rugged fiberglass reinforced plastic construction.
• All glass multi-coated lenses for superb clarity
and brightness.
• Revolutionary F1.2 lens with amazing light
transmission.
• The NZT-625 infra-red illuminator was
designed to let you see even in total darkness.
• Sturdy Hand Strap for comfort of use.
• Waterproof.
• One year warranty (optional extended warranty).
Power button
IR illuminator
IR illuminator
power
5 Diopter
Battery housing
APPLICATION
The NZT-625 night vision spotting scope
is a compact 100% waterproof hand held
monocular. A 2.5x magnification all glass
lens system combined with a high quality 1st
generation + light intensifier tube gives you a
bright and sharp image in any dark situation
you may find yourself in.
Do not let darkness impair your vision for
a moment longer. Whether you are camp
ing, boating, observing wildlife or surveying
your property for intruders the NZT-625 night
vision device lets you see what goes bump in
the night.
The NZT-625 Night Vision Monocular is a com
plex opticoelectronic system for individual use.
The device consists of an objective lens assembly, eyepiece and a body. The body contains 1st
Gen.+ image intensifier tube assembly with an
integrated high voltage power source and the
three volt battery housing. When installing the
battery one should keep in mind that the battery
polarity should coincide with the diagram on the
body next to the battery housing cap.
Objective lens protective cover is intended
to protect objective lens from dust and
scratches. It also will act as a daylight filter,
allowing you to test the scope in daylight or
other bright light situations. The pinhole in the
center of the protective cover allows a user
to check an operation ability of the device in
daylight conditions.
NOTE: Do not test the scope in daylight condi
-
tions even with the daylight filter/lens cap on for
more than ten (10) minutes.
SPECIFICATIONS
Total Darkness Technology ................Standard
Magnification ............................................. 2.5X
Intensifier Tube .................. High Res. 1st Gen +
Detection Range............................ 150 m/yards
Recognition Range ........................100 m/yards
Lens System .............................. F1:1.2, 50 mm
FOV.............................................................. 13°
Diopter Adjustment ....................................... ±4
Resolution...........................................40 lp/mm
Power Supply ........... One 1.5 Volt Battery(LR6)
Range Of Focus ......................... 1.5m to Infinity
Controls .................................................. Digital
Battery Life..................................... 10-20 Hours
Operating Temperature ............ -40°C to +40°C
Dimensions..............178 mm X 56 mm X 76 mm
......................................................7” X 2.2” X 3”
Weight............................................0.4KG/14OZ
F1:1.2, f50mm
front lens system
Carrying strap
Loading...