ATN NZT-35 User Manual
user`s guide
NZT-35
NIGHT VISION SPOTTING SCOPE
Export of night vision equipment and optical sighting
equipment is controlled by the
U.S. Department of State, Office
of Defense Trade Controls in
accordance with International
Traffic in Arms (ITAR), Title 22,
Code of Federal Regulations Part
120-130and/or the Export Administration Regulations (EAR) U.S.
Department of Commerce. Illegal
export of these commodities is
strictly prohibited.
AMERICAN
TECHNOLOGIES
NETWORK
CORP.
The information in this manual furnished for information use only, is subject to change without notice,
is not to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
©2005 ATN Corp. All right reserved.
FEATURES
• Rugged fiberglass reinforced plastic construction.
• All glass multi-coated lenses for superb
clarity and brightness.
• Revolutionary F1.2 lens with amazing light
transmission.
• The NZT-35 infra-red illuminator was
designed to let you see even in total darkness.
• Sturdy Hand Strap for comfort of use.
• Weather Resistant.
• One year warranty (optional extended warranty).
Power button
IR illuminator
IR illuminator
power
±5 Diopter
Battery
housing
APPLICATION
The NZT-35 night vision spotting scope is
a compact, stylish hand held night vision
spotting scope.
A 3.4x magnification all glass lens system
combined with a high quality 1st generation + light intensifier tube gives you a
bright and sharp image in any dark situation you may find yourself in. A free longrange infrared illuminator is also included
to let you see even in total darkness.
Do not let darkness impair your vision for
a moment longer. Whether you are camping, boating, observing wildlife or surveying your property for intruders the NZT-35
night vision device lets you see what goes
bump in the night.
The NZT-35 Night Vision Monocular is a
complex opticoelectronic system for individual use. The device consists of an objective lens assembly, eyepiece and a body.
The body contains 1st Gen.+ image intensifier tube assembly with an integrated high
voltage power source and the three volt battery housing. When installing the battery
one should keep in mind that the battery
polarity should coincide with the diagram
on the body next to the battery housing cap.
Objective lens protective cover is
intended to protect objective lens from
dust and scratches. It also will act as a
daylight filter, allowing you to test the
scope in daylight or other bright light situations. The pinhole in the center of the
protective cover allows a user to check an
operation ability of the device in daylight
conditions.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for
more than ten (10) minutes.
SPECIFICATIONS
Total Darkness Technology ............Standard
Magnification ........................................... 3.4X
Intensifier Tube .............. High Res. 1st Gen +
Detection Range .........................150 m/yards
Recognition Range .....................100 m/yards
Lens System ............................. F1:1.2, 50 mm
FOV .............................................................. 13°
Diopter Adjustment .....................................±4
Resolution ........................................ 40 lp/mm
Power Supply ....... One 1.5 Volt Battery(LR6)
Range Of Focus......................... 2m to Infinity
Controls .................................................Digital
Battery Life .................................. 10 -20 Hours
Operating Temperature ..........-40°C to +40°C
Dimensions .......... 185 mm X 60 mm X 81 mm
.............................................702” X 2.3” X 3.2”
Weight ........................................ 0.45KG/16OZ
F1:1.2, f50mm
front lens system
Carrying strap
Loading...