ATN Night Patriot User Manual
Night Patriot
u s e r ` s g u i d e
AMERICAN
TECHNOLOGIES
NET WORK
CORP.
Built-in Infra-red Illuminator
Multicoated lens
Threads
Digital Control for IR
ON/ OFF
Eyepiece
Power Light
indicator
The information in this manual furnished for information use only, is subject to change without notice, is not to be
construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liabilit y for any errors or inaccuracies that may appear in this book.
©2001 ATN Corp. All right reserved.
IR Light indicator
One three volt battery
APPLICATION
The Patriot Multi-Purpose System (MPS) is designed to be the ultimate Night Vision Device.
This versatile unit can be used in night vision time situations as a compact hand spotting
scope, a hands free goggle system, a weapon sight, and applicable for video or photography.
If versatility is what you are looking for in night vision device then the Patrior MPS is the system
for you. The Patriot system allows you to custom design your own personalized unit. By ordering different packages you can build a system that fits your specific night vision needs.
To build the perfect system you must start with the perfect base unit to build upon. By utilizing
a high resolution 2nd or 3d generation US intensifier tube the Patriot has one of the brightest
and sharpest images available. A built-in illuminator allows you to see clearly even in total
darkness. Combine this with all glass optics specially coated to absorb light and the Patriot is
an exellent compact pocket scope.
PATRIOT I
• 1st Generation US
• 1x30mm lens
• 30mm Eyepiece
• All glass multi-coated lenses
• Built in infrared Illiminator
• Soft carrying case
• Red on Green weapon sight eyepiece
• Mounting rings, 4x90mm 6 element lens
• Long Range IR
• Goggle Kit (Head set with chinstrap, Transfer piece)
• 3 element Magnification Doubler
• Camera/Camcorder adapter
• Pelican waterproof hard case
PATRIOT II
• 2nd Generation US
• 1x30mm lens
• 30mm Eyepiece
• All glass multi-coated lenses
• Built in infrared Illiminator
• Soft carrying case
PATRIOT III
• 3rd Generation US
• 1x30 mm lens
• 30 mm Eyepeice
• All glass multi-coated lenses
• Built in infrared Illiminator
• Soft carrying case
A Long range IR is also available. This will extend the infrared range out to 100 meters.
2
OPERATION
• Take the monocular out of the case.
• Install the batteries into the housing with the polarity order as shown on the scope. Battery
Type: 3 Volt Lithium, #CR123A
• Press Button marked – /O to turn unit on with the protective lens cover still attached to the
lens. Do not turn unit on in the daytime without the protective lens cap on. You should
see a green glow in the eyepiece
• Observe the scene, and adjust the diopter for optimal image clarity.
• You may now enter a dark environment, or simply shut the lights off in order to darken the
room.
• Next, remove the lens cap/daylight filter. Adjust front lens for distance focus. You should not
have to readjust diopter.
• You will need to focus the objective lens for different distances.
LONG-RANGE INFRA-RED ILLUMINATOR
The long range IR works on a separate battery from the main unit. To install the battery
unscrew cap and insert battery in the same direction as depicted by the diagram on the IR. To
install the long range IR to the main body of the Patriot screw the thumb screw on the IR into
the thread on the body of the Patriot.
You may notice that IR might not shine directly in the middle of your viewing image. This can be
adjusted by unscrewing the lock ring, then adjusting the main body of IR. Once you have the IR
aimed in the correct direction re-tighten locking ring. You may desire a different field of coverage
from the IR illuminator. If so the beam is focusable. By turning the lens of the IR you will change
the beam width slightly.
lens of the IR
3
main body of IR
thread
lock ring
cap
thumb screw
Loading...